MATRIXSYNTH: Tuesday, August 14, 2007


Tuesday, August 14, 2007

Prophet 8 - Dave Smith Instruments


YouTuve via Lovesign.
"A teaser video of the forthcoming Prophet 8 synthesizer from Dave Smith Instruments, courtesy of Stefan Trippler" Prophet '08

DSI Prophet '08 Pic


via the VSE thread, via via HarriL.

Comment on this post.

Synth Clusters

Title link takes you to the individual shots on SoNiCbRaT.

Synthesizer

flickr by c_singh84.

KORG MS10

click here for the full size shot.

DIY Music / Making Your Own Cardboard Synthesizer


YouTube via lavieenjaune.
"Testing our cardboard synth. Based on the 'Your First Synth' how-to shown here via Music From Outer Space"
More info on fotosis.

Dead Presidents Society

"The Dead Presidents Society is a group of friends who share a passion for the influence of technology on music, and who meet every Thursday morning at a coffee house in Berkeley, California. The group's name was born out of the fact that a number of the members were formerly presidents of electronic music product companies that died. :)"
The members are... Click on the image and see if you can spot them. : )

Title link takes you there. via Johan

Laura Scarborough

Remember this post?

Title link takes you to Laura Scarborough's website where you will find more shots, vids, samples and more.

via Appliancide in the comments of the previous post.

More DSI Prophet '08 Samples

Copy the following link and paste it into your address bar:

http://www.trippler.net/files/p8/p8a.mp3

Then change the p8a.mp3 to p8b.mp3, then p8c.mp3 and so on.

Thanks to Mr. Array for the tip.

Comments disabled to keep them all on this post.

ZIZZLE Zoundz

Ok, this is pushing it as far as synth content, but there you go... If it only supported MIDI in and out.

"ZoundzTM creates a fusion of self- composed music with an accompanying light show. With it, users can create musical light shows never seen before. They can create their own riffs by placing one of Zoundz TM’ pawns on an interactive “hot spot” on the sound board. Each pawn associates with the sound it makes and by placing them on different locations and in different combinations, users can compose music all their own. The music portion can be fine tuned with the mode switch which enables users to adjust the tempo of the music, raise and lower the volume, increase or decrease an echo, or sustain and draw out specific sounds. Each interactive “hot spot” lights up when a pawn is placed on it and will groove to the tempo of your music. The color of the light also reflects what type of music the pawn produces with red indicating a sharper tone while blue reflects softer more soothing sounds."

ARP 2500 and More


via Francois on AH. Original link.
More:
"2 Polykobol from the 4 installed here. I am designing a full midi for it. For 8 voices poly and multi.
http://img508.imageshack.us/my.php?image=polykobolvu9.jpg

3 Korg PS 3100 midified: One of them is my first analogic synth.. bought in 1988.. 8-) http://img174.imageshack.us/my.php?image=korgps3100gl6.jpg
Below, description of the midification:
http://www.midibox.org/forum/index.php?topic=9388.0

6 voices of Kobol.. From the 21 voices here.
http://img522.imageshack.us/my.php?image=koboltowerxx0.jpg

Home built midibox sequencer prototype
http://img240.imageshack.us/my.php?image=sequencersy7.jpg
Here, description of the final sequencer http://www.midibox.org/forum/index.php?topic=9387.0

Another view of the music room:
http://img123.imageshack.us/my.php?image=room2yt7.jpg

You don't see on the picture, others Kobol rack, one ondioline, a clavinet D6, a VP330 and other synth as well as home built synth."

New DSI Prophet '08 Teasers

Two samples and a vid at the end of this post.

The LEDs for the 8 voices.

Tony Wilson RIP

via Mark:

"Tony Wilson, founder of Factory record label (New Order, Joy Division, Happy Mondays, etc) passed away on August 10th. http://neworderonline.com/News/NewsRoom.aspx"

monome-DS

This one in via Robert. You can find discussion and the download on this gbadev thread while it's up. If anyone has a screen shot of this, feel free to send it in. A monome for the Nintendo DS.

Details:
"monome~ds v1.0 by GrizzlyAdams

Simple simulation of a monome 40h like device with some artistic license.

40h buttons: send midi keydown / keyup events 0-63
40h lights : respond to midi keydown / keyup events 0-63

Channel buttons & Up/Down DPAD: select current channel

Connection light:
the small light at the bottom of the screen under the divider between the
40h buttons and channel buttons shows the status of the connection.
Yellow = Connecting
Green = Connected
Red = Disconnected/Error

By default it starts in local loopback mode, press START to connect.

There is no config menu in this version and you are stuck with the first WFC profile.

Future plans:
- glowing channel buttons showing data flow (33% = data, 66% = selected, 100% = both)
- actual emulation of a monome 40h / wrapper for running monome firmware
- wfc selection
- 2nd display-only monome

NOTE: this program is NOT from, licensed by, or supported by monome."

DSI "Prophet '08"

In case you missed the updates to this post, the new rumored synth is going to be an eight voice analog synth based on the CEM chips used in the Evolver with the sequencer, arpeggiator and memories. It will sound different than the Evolver. More details in the previous post. Comment disabled here to keep them all in one post. If anyone has more info on this including any pics or samples, please feel free to comment.

Ben Pringle (The Rentals) Repairs the Pro-One


YouTube via TheRentalsDotCom. Sent my way via Sean.
"a quick "how-to" on fixing a problematic key or two on the Sequential Circuits Pro-One"
Note there is also a j-wire version of the Pro-One. I picked one up for $125 due to a sticky note. I popped it open, bent the j-wire back in place and it was fine.

Update via the comments:
"hmmmm.that's more of a rig than a fix.... next time, use a pencil erases on the back of the membrane and on the metal contact on the PCB, it will actually "fix" it instead of introducing foreign materials like tape that will only make it work temporarily and then probably melt and gum up your control board and make things worse."

Oberheim SEM Modded for Keith Emerson?

via this auction.

Details
"Oberheim CPS-1 that have been modified especially for Keith Emerson back in the 1970's. We have no official documents that certify that but since it have really been modified for him, I'm saying it here on ebay and if someone knows him and ask him, he will remember this synthesizer because it's unique in the world. (the modification I mean)."

Update : for anyone considering this one, be sure to check out the comments of this post and of course be sure to check out all the feedback."

EDP WASP

Title link takes you to shots via this auction.

















Oberheim OB-1

Title link takes you to shots via this auction. Note the blue LEDs.

"-8 patch memories for saving user presets, VERY handy on a vintage monosynth!
-2 VCOs with Saw and Pulse waveforms.
Both VCOs have a voltage controllable width control (both can be swept by LFO or Vco2 by the Envelope) for both the pulse waveform (from square to narrow pulse waveform) AND rather uniquely the sawtooth waveform too (can be swept from sawtooth to a sine waveform!)
-2 Sub-Oscillators available, one for each oscillator! Can sound HUGE!
-Oscillator Sync and Cross Modulation. Oscillator sync is absolutely killer sounding, i dont think ive heard a synth that has better oscillator sync! Cross modulation is great too.
-Excellent discreet, Oberheim filter, either 2 pole or 4 pole slopes are available with keyboard tracking and resonance. Keep rolling up the resonance and the bottom end stays solid. Fantastic sounding filter, one of my favourites!
-1 LFO, three waveforms, Sine, Square or S+H.
-White noise.
-2 ADSR Envelopes.
-Portamento.
-Flexible modulation buss. LFO can modulate both oscillators frequency or waveform shape and the filter cutoff. Envelope can sweep Oscillator 2 or the filter.
-Excellent performance bender, you can bend one or both oscillators (has a broad or narrow range) or introduce modulation.
-CV, Gate and audio inputs."

Admin: Contact Info Update

Just an fyi, but I changed my contact info from matrixsynth at hotmail to matrixsynth at gmail. My hard drive crashed the other day and I had to rebuild it from scratch. I went with Vista (apologies to the Mac users out there but I need it for work) which no longer has OE, so I went with Outlook and the hotmail integration is horrendously slow even after downloading all my messages, 2.5 Gigs. : ) I keep everything. Anywho, I finally gave up and decided to try gmail integration with Outlook. It supports proper POP and is FAST, so... I'm on gmail now. If you have me in your address book, please take a minute to update it with the new address. Apologies for this, but my mind was going numb waiting for each individual email to synchronize with the server. It's literally like those dreams where you try to run but can't as you feel like you are running waste deep in water. Mind numbing, horrid stuff.
PREVIOUS PAGE NEXT PAGE HOME


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH