"viSion nocTurNa"... Jomox XBase 9999, Dave Smith Evolver Key, Moog Voyager,Phatty, Moogerfoogers

YouTube Uploaded by luchomolinarixxx on Apr 8, 2011

"'viSion nocTurNa'... Jomox XBase 9999, Dave Smith Evolver Key, Mopho, Prophe,t Moog Voyager,Phatty, Moogerfoogers"

Bluesy Theme

YouTube Uploaded by polysmart on Apr 8, 2011
Anyone recognize the keyboard?
"Click on 480p for better sound.

I haven't made any new videos for quite some time but I have a new cover planned and a new album in a few months. For now enjoy this bluesy theme."

Looking for Madonna

via this auction

Analog Synth Modules: Filter, Oscillators, LFOs PAIA

via this auction "3 Frac Rac sized 9 volt homemade analog or analogue synthesizer modules. These were made to fit into and be powered from a Blacet type setup (http://www.blacet.com/) and use 1/8" jacks and Molex connectors. .From left to right in the photo: 1). dual oscillator module constructed from two opamp function generator kits featuring separate waveform outputs, manual frequency control knob, and control voltage input. This does NOT track at any known standard, i.e. 1v/octave. You can't play tunes with this unless you are very creative. 1 space width. 2). Filter module, based on Craig Anderton's wah filter from the "Electronic Projects for Musicians" book. Homemade circuit board with lots of knobs. Rather gritty. 2 space width. 3). Dual LFO module with rate control: these are Blacet LFO PCBs that he used to sell for his CZ-101 Instamod. 1 space width.

Using a proper power supply, such as two 9 volt batteries wired properly, and a few 1/8" cables..."

Squidfanny - Circuit Bent ZOOM 606 Digital Effects Pedal vs KAWAI R-50e

YouTube Uploaded by squidfanny on Apr 8, 2011

"Modified Digital Guitar Effects Pedal....

+Loads of Bit-Mangled Ring Mods, Chopping, Oscillation, Distortion and Digital Glitch.

+Modulation thanks to Precision Oscillator and LFO Circuits.

+4 x Synth Tone Switches for self Oscillation.

+Switch to cut the 'Delay' on demand.

+Sinister Flashing GREEN light for LFO Rate."

sonar surround ambient recording @ Musikmesse 2011

YouTube Uploaded by Moogulator on Apr 8, 2011
Best Musikmesse video ever?
"sonar surround ambient recording @ Musikmesse 2011"

Airböurne AVS04 Modular Synthesizer

YouTube Uploaded by Moogulator on Apr 8, 2011

"Martin Hollingers Modular Synthesizer AVS04, Martin is the guy behind Synthorama Synth-Museum. This synth is based on FPGA.

sequencer.de synth database / news"

Silver 002

flickr By TREXNYC
(click for more)

Schmidt Synthesizer (Musikmesse 2011)

Added to the main Schmidt Analog Polysynth post. This one is a video pan of the interface.

Musikmesse Superbooth Video

Musikmesse 2011 - Teeeh Analog Synthesizer Scan

YouTube Uploaded by Moogulator on Apr 8, 2011

"Analog-Synthesizer - Schneider, Schmidt und der Stand mit Mode Machines und Analog Systems

by sequencer.de synth news/database."

Evelina and Korg PADkontrol

flickr By Evelonism

Circuit Bending a Roland TR-77 aka Bentley Rhythm Ace FR-8L

Details on the bends on Circuitbenders.co.uk. Interesting bit on the history of the TR-77:

"Why both names you might ask? Well, before Roland came into existence there was a company in the 70's called Acetone who distributed several drum machines of the 'sit on top of your home organ' variety. These machines were mostly firmly in the Rhumba and Bossanova camps, but in the UK they were marketed under the name Bentley Rhythm Ace, which is as good a name as any i guess. Eventually all these distributors morphed into the mighty beast that was Roland in the late 70's and early 80's, but many of their product ranges seem to have been redesigned and sold as Roland machines, often at the same time as appearing under other names. One of these is the Bentley Rhythm Ace FR8L which is to all intents and purposes a Roland TR77 drum machine, the first product ever to bear the Roland name."

You can find an image of the FR-8L in this previous post. For comparison, here is a pic of an FR-6.

Brainwave Sequencer for iPad

"Brainwave is a clip based MIDI sequencer. Bring your melodies and drum beats into life with the streamlined and intuitive MIDI clip editor. Assemble and arrange entire songs with the Arrangement editor. Control up to 16 instruments using the built-in sampler. Use the built-in audio samples to quickly get up and running, or use your own samples for even more creative sounds. Then produce and export MIDI files to be imported to your favourite Digital Audio Workstation software. All this inside of an ergonomic and minimalist user interface that will help get your inspiration to fruition.

Drive up to 16 instruments
* built-in sampler with 16 voices
* volume envelope
* loop points and loop modes (once, loop, ping pong)
* transpose offset to tune samples
* built-in samples or user samples, through iTunes sharing
* drum pad mode allowing for 16 individual samples to be mapped to drum pads
* mixer interface to solo/mute and adjust track volume

MIDI Clip Editor
* 16 ticks per beat
* up to 256 clips per song
* sequence melodies and beats in the clip editor
* sequence all instruments in the same clip
* fine control over note length and velocity per note or for a selection of notes
* copy a note sequence from one instrument to another
* make a copy of a MIDI clip to create new variations
* unlimited length
* looping mode to easily iterate on a clip

Song Arrangement
* quick start with built-in templates
* sequence and layer MIDI clips
* reorder clips to organize the visual layout

Interoperability
* export as multi-track MIDI file to your favourite DAW
* manage songs and samples via iTunes sharing"

Brainwave Sequencer - Alexandre Jean Claude
iPads on eBay

O-Generator - Hey There Delilah - The Plain White T's

YouTube Uploaded by ogenerator on Apr 8, 2011
It would be great to see MIDI out support for this so you could use it to sequence external gear.
"O-Generator Music Maker is an App that can be used as a musical sketchpad to compose, learn, create and develop ideas in different styles whatever your musical level.

O-Generator's simple interface achieves sophisticated results. You can create and combine chords, choose individual notes and develop unique rhythmic patterns for your music compositions using an array of real instruments from drumkits to guitars. The beauty about O-Generator is that YOU compose the music.

http://www.o-generator.com"

O-Generator Acoustic Music Maker - O-Music Ltd
iPads on eBay

Visualizing PWM

YouTube Uploaded by ostrakamusic on Apr 8, 2011

"MKS-80 PWM visualized in the MOTU Audio Express oscilloscope."

ENSONIQ SD1

via this auction

"12 CHANNELS FOR MULTIMBERAL FUNTIONS AS WELL AS FOUR 16-BIT DAC OUTPUTS, WITH A BEAUTIFUL 5-OCTAVE SYNTH ACTION KEYBOARD AND THE EASIEST MOST POWERFUL SEQUENCER EVER INSTALLED IN A WORKSTATION"

CLICK FOR MORE »

Korg Mono/Poly

via this auction

Roland V Synth (version 2)

via this auction

CLICK FOR MORE »

Kawai K3m Rackmount Digital/Analog Hybrid with RC-2 Memory Cartridge

via this auction

The auction states the K3R is a wavetable synth, but it actually isn't. The oscillators have digital waveforms you can select from but they are not wavetables. It does have SSM 2044 analog filters (see this post). It is a nice sounding synth.

"It has 32 waveforms, some of which are samples of acoustic instruments like piano and percussion as well as some unique waveforms. By combining two of these waveforms you can create unique new sounds or add a twist to a traditional sound. Since there are only 32 of these waveforms, the K3 also features a programmable digital waveform where you can tweak the harmonic content of a waveform allowing for added flexibility and range of sounds."

Fender Rhodes Chroma Expander

via this auction

via the description:
"I bought this Chroma Expander in either 1986 or 1987 directly from Fender to use as a backup and programming synth when I was working with Josef Zawinul in all technical capacities. As you can see from the pictures, I added forced air cooling (a fan) to the rear panel and cut an air intake hole on the bottom of the synth adjacent to the power transformer location. I did this mod to all of Joe's Expander's and he had already had it done to his Chroma's. European Jazz Festivals in the summer were not forgiving to his analog synth gear. The fan will run at the same speed regardless of the Mains Voltage selected. Even though we never took this unit on the road with us, it had to be ready to travel just in case.

I have completely rebuilt the power supply. C3 is now 50,000ufd 16VDC rated allowing me to remove the OverVoltage Crowbar circuit and all Series Pass elements have been replaced as well as the rectifiers and electrolytic capacitors. The capacitors have been replaced with 105 degree Panasonic FC or Nichicon types with higher microfarad values. The Dual Channel Voice Card Motherboard has been upgraded as well. The batteries have been replaced with rechargable Li-ion types and the battery holder was replaced as well.

The Midi Converter is from my friend Ken Ypparila at Syntech and is installed internally. I will include a copy of the manual I made back in the day. The midi jacks are not labeled, however, I used patch-bay wiring convention of Send upper and Receive lower...

Shipping will be expensive. Roughly 60 lb.'s and because of double boxing the packaging will be 50 inches X 20 inches X 15 inches. "

CLICK FOR MORE »

Audio To Synth converter on Breadboard

YouTube Uploaded by hesed23 on Apr 8, 2011

"New test.....

Convert audio in this case guitar in to a synth sound with variable PW, triangle LFO speed and depth.
It sound also amazing with voice thru mic or piezo... :)"

Raymond Scott techno w/Cyclebox + Sound of Shadows

YouTube Uploaded by s0LVentCIty on Apr 8, 2011

"Hi my name is Solvent and this is my 3rd Eurorack modular system video. Today I've made some Raymond Scott techno, with the help of my newly arrived Cylonix Cyclebox and Flight of Harmony Sound of Shadows. I haven't really got a clue how to use the Cylonix yet, but I thought this sounded good, so I pressed record. Drums and everything else are being triggered/sequenced from the MFB Urzwerg."

ether^ra CELLFRAC

YouTube Uploaded by potterpaint2000 on Apr 8, 2011

"a Serge Creature/Seq A improv w/delay. http://etherra.blogspot.com/"

Tutorial: track event editing in BeatStudio

YouTube Uploaded by FrontierDesignGroup on Apr 8, 2011

"http://fdgm.us/BeatStudioBuy - BeatStudio now available at a special introductory price!

Laying down a couple simple tracks and then using the editor to add more instruments and flesh out the song."

Frontier Design Group
iPads on eBay
iPod Touch on eBay

Triassic-Alnitak

YouTube Uploaded by Kobolnova on Apr 8, 2011

"The Triassic is a geologic period that extended from about 250 to 200 Mya (million years ago). As the first period of the Mesozoic Era, the Triassic follows the Permian and is followed by the Jurassic. Both the start and end of the Triassic are marked by major extinction events.
So sorry i upload this again,i made a mistake:it should be named Triassic and not Jurassic, and also the Pinnacle studio 14 made some clicking and distorted sound in previous video when i tried to merging the both versions,this is the NEW video,with the right title and with no merge and with not one audio problem:AND both full versions(1and 2)are in full 1080p quality for the first time!
The lead voice of both full versions is the sound of the incredible Creamware Minimax(the only tru and very good MOOG Minimoog model D emulation)the padsound comes from the Roland XP-50 and the bass and noise from the analoge Roland JX-8P
The music comes from my heart,from my soul;i do not need sheet music,music is the language of emotion and from the heart!
The Triassic-Alnitak music-video is composed,performed and live performed here by Alnitak(Bert Anjewierden)c2010/2011
To you J.L and azzarbprime:i want to thank you for your support in me and i want to thank for your trust in me,your are one of my best friends! :)"

A musical analysis of Oxygene 2 - JMJ - Part 2/3 : "light cover" by Thierry Lebon

Uploaded by tlnet37 on Apr 8, 2011
Part 1 posted here
"- download the mp3 file here : http://goo.gl/gaxar -

How to make a soft version of Oxygene 2 with minimal equipment : only 2 synths !
All is hand and by ear played .This is a very "light" cover ! I recorded 10 audio tracks with Presonus Studio One, but without automation and I have to add 2 tracks for noises with the Roland SH-101.
I only use Rythmus (by ElektroStudio), Alesis Fusion 8 HD, Roland SH-101, Electro-Harmonix Small Stone (Phaser) and Memory Boy (Tape Delay).
I'm beginner, and not a musician, so ... sorry for bad hand playing and tempo not respected sometimes !

Cheers from Thierry ! next step : Equinoxe & Rendez-vous ..."

New Synthwerks Modules - FSR-2P, SP-1P & FSR-1T

via Synthwerks
"The Synthwerks FSR-2P

Dual Passive Force Sensing Resistor Module

The FSR-2P has two 1.5" square FSR force sensors that are wired directly to two sets of 1/8" jacks. There are no active electronics in the module. The module can pass both audio (AC) and control voltage (DC) signals with output levels proportional to the force applied to the associated pads. With no force applied the FSR appears to the circuit as an 1 Meg resistor (approximately). The Jacks and FSRs are mounted to a 14 HP reversible panel. The panel graphics are so that the panel can be rotated so the user can choose left-handed or Right handed operation.

The FSR-2P is 14HP in width and has a MSRP of $75.(US)"


"The Synthwerks SP-1P Single Passive Slidepot Module

The SP-1P has a single 60mm throw high quality slide pot with its taps wired to a set of 1/8" jacks. There are no active electronics in the module. The module can pass both AC and DC signals with output levels proportional to the position of the slider. The Jacks and slide pot are mounted to a 8 HP reversable panel. The panel graphics are so that the panel can be rotated to choose if the jacks are above (desktop) or below (cabinet) the slide pot.

The SP-1P is 8HP in width and has a MSRP of $75.(US)"

"The Synthwerks FSR-1T Force Sensing Resistor Module with Toggle Switch/Gate

The FSR-1T is a single channel FSR module, based on the FSR-1N, but has a large square Force Sensing Resistor sensor that translates the pressure the performer applies to its sensing pads into a user adjustable scaleable control voltage, and an adjustable threshold dependent gate signal. The FSR-1T also adds a section with an electronic bi-directional switch that toggles one input/output between two other inputs/outputs (A & B) or visa versa. This toggle action is driven from the standard gate out from the FSR’s gate out. An internal jumper can choose whether the switch operates in toggle (on-off-on) or momentary modes. The electronic switch is bi-directional and able to pass DC and AC voltages. The IN/OUT jack is normalize to a +V and its output at A & B in toggle mode, will act as a toggling gate at one half the frequency of the standard Gate out. LEDs indicate the active state of all gate outputs.

The FSR-1T is 10HP in width and has a MSRP of $195 (US)"

You can find discussion on Muff's here and here.

TheHarvestman: Double Andore

flickr By Analogue Haven

"Finally, a photo of a finished module, here is the Double Andore. This also means that it will be available soon. A run of Piston Hondas are just now finishing up with their factory assembly meaning those same production machines can start building the Double Andore. We expect stock sometime in May.

The Double Andore is a dual A-D envelope generator and 2-channel VCA with digital curve shaping and VCA law selection. More details via our website"

"dual a-d envelope generator and 2-channel vca with digital curve shaping and vca law selection. double andore is to function as your synthesizer's keystone and its meridian.

double andore features a symmetrical control layout with two identical sides. the top section of each half is an a-d envelope generator. a trigger input is provided, along with "freeze" and "mirror" gate inputs. the former holds the envelope at its current position, and the latter inverts the position of the envelope within its voltage range. the envelope signal passes through a digital curve shaper whose selected curve is numerically displayed. normally, each half of the module has its shape selection apply to both the attack and delay phases of its envelope, but you can enable an alternate mode where the left and right shape select controls instead select different curves for attack and decay. two banks of envelopes are available.

the envelopes can behave in three ways. ad mode runs through its phase upon receipt of a trigger or gate. ahd mode holds the envelope at its maximum value if there is still a gate present at the end of the attack phase. lfo mode freely cycles back and forth between attack and decay phases with no trigger necessary. all three modes will retrigger to the beginning of the attack phase if another trigger event is applied. each envelope features one cv input which can be assigned to any of the following parameters: attack time, decay time, and curve shape. negative voltages are valid input and will correctly add or subtract from the manual voltage of the assigned parameter(s). each envelope has three outputs with led indicators: the 0-8v envelope voltage, and trigger signals that fire at the end of both attack and decay phases.

the lower part of each half is a dc-coupled vca. the envelope output is normalled to the vca control input, and can be overridden by patching into the ctl jack. the gain law of each vca is switchable between linear and exponential. the exponential mode can distort if excess audio or control input is given, and its sensitivity can be adjusted by an internal trimmer. by holding down the law selection button for two seconds, you can enable cross-modulation from the opposite vca channel.

the center section of the module features mixers for both envelopes and vcas. the envelope mixer is a maximum circuit that outputs only the highest voltage from the two envelopes, with a balance control to adjust the strength of each input. the vca mixer simply mixes the output of both amplifiers with no additional controls necessary.

miscellaneous information:
envelope voltage range: 0-8v
10v trigger outputs
envelope time ranges from 30 seconds per cycle to 3khz
2 banks of 16 envelope shapes each
envelope curves writable with "wave256" software (interpolated to a greater resolution within the module)
+/-12v doepfer-style power connector
panel size: 21hp
current draw: 225ma

for more info, please click here to visit the website of the harvestman."

Seventh

Seventh by alienrobotdance
"A Tr 707 jam I reworked into a track.

Lot's of juno 60 and JX3P in this song."

Trash_Audio & Xart Synth Meet 9 Pics by Ma-chew

flickr set by Ma-chew

sfSoundRadio: Live Broadcast of Alvin Lucier's "Music on a Long Thin Wire"

This one in via Brian Comnes:

"APRIL 8-12 2011
sfSoundRadio presents a continuous broadcast of

Alvin Lucier's "Music on a Long Thin Wire" (1977)

duplicating the historic 5-day radio broadcast from a shopping center in Albuquerque, New Mexico, 1979.

Realization by Tom Duff, from his backyard in Berkeley, CA.


http://200.35.148.107:8000/listen.pls (to listen iTunes, etc)
http://sfsound.org/radio.html (to listen in web browser - or follow instructions to listen on IPhone)

http://en.wikipedia.org/wiki/Alvin_Lucier
http://en.wikipedia.org/wiki/Music_On_A_Long_Thin_Wire
http://en.wikipedia.org/wiki/Tom_Duff"

via wikipedia:

"Music On A Long Thin Wire is a musical piece by Alvin Lucier conceived in 1977.

In his own words (1992): 'Music on a Long Thin Wire is constructed as follows: the wire is extended across a large room, clamped to tables at both ends. The ends of the wire are connected to the loudspeaker terminals of a power amplifier placed under one of the tables. A sine wave oscillator is connected to the amplifier. A magnet straddles the wire at one end. Wooden bridges are inserted under the wire at both ends to which contact microphones are imbedded, routed to the stereo sound system. The microphones pick up the vibrations that the wire imparts to the bridges and are sent through the playback system. By varying the frequency and loudness of the oscillator, a rich variety of slides, frequency shifts, audible beats and other sonic phenomena may be produced.'

However, Lucier admits a long thin wire is only used to impress, a short thin wire would have worked as well if not better, and he discovered that the best way to produce variation in the sonic phenomena was to pick a setting and leave the setup alone. He praised David Rosenboom for his ability to pick interesting settings.

It has been exhibited:

1979, Winrock Shopping Center, Albuquerque, and broadcast uninterrupted on KUNM-FM for five days and nights
1980, Landmark Center, Saint Paul
1988, Gallery of the Center for the Arts at Wesleyan, Middletown, CT"

audioMIDI.com Presents The M-Audio Venom, Part Two

YouTube Uploaded by audiomidicom on Apr 8, 2011

"Synth expert Mitchell Sigman talks about M-Audio's new Venom virtual analog synth with integrated audio interface. Get Venom at www.audioMIDI.com!"

Part 1 here

Altair-4 The SciFi Sounds Lab DemoVideo

YouTube Uploaded by HGFSynthesizer on Apr 8, 2011

"Altair 4 - The SciFi Sounds Lab
is for spacey & wobbly stuff, drones and scapes i.e SciFi FX-sounds, and it is quite good at doing bell like sounds too.

The movie Forbidden Planet from 1956 being the first movie with a complete electronic soundtrack (by Louis and Bebe Barron) using sounds that could have been done with this plug.
"This instrument does do a lot of the things the Barron's did with their circuitry albeit a lot easier".
"It makes sciFi sounds & noises and everybody will reminiscent to a old soundlaboratory of the 50/60ties".
Anyway Altair 4 puts it to a modern level.

Hence the name of this plugin Altair 4 as this is the Forbidden Planet in the movie ;-)"

"Regeneration" making.....「再生」：メーキング

YouTube Uploaded by btpro on Apr 8, 2011
Mellotron and Crumar Stratus come in at 7:12. See this post for the complete track.

"Making scene of 'Regeneration'.

Originally released from Columbia Record as "Juma/Legend".
"Juma/Legend" is SF story written by Wakako Mizuki.
She won a lot of prizes.


アルバム「樹魔・伝説」から「再生」の制作過程です。
オリジナルバージョンはコロムビアレコードから発売されていました。"

Yamaha Cs15 Vintage Duosynth

via this auction

Yamaha TX16W Sampler Typhoon

via this auction

"YAMAHA TX16W Digital Sampler / MIDI Sound Module... Typhoon operating system is installed."

You can see a video of another TX16W with Typhoon OS here.

via wikipedia and NuEdge Development: "Typhoon is a replacement operating system for the Yamaha TX16W sampling synthesizer. The first version was released back in 1994 and it quickly became the obvious choice of operating system for the TX16W community. For years they had struggled with a slow and clumsy sampler. With the introduction of Typhoon OS these days were blown away for good. Not only did Typhoon improve the stability and speed of the TX16W; it also provided features that were comparable to or even surpassed those found on the top samplers at that time.

The main benefits of using Typhoon compared to the original Yamaha operating system are:

Typhoon is easy. The user interface is well structured and extremely consistent which makes learning and using Typhoon a breeze.
Typhoon is fast. For instance, the startup time is merely 20 seconds. All menus are loaded into system memory so access to different functions is always instant.
Typhoon is small. Compared to the Yamaha OS, Typhoon requires almost 500kb less in waveform memory. This is in effect one third of the 1.5Mb that the TX16W is equipped with as standard.
Audio file compression to save time and space (30 to 60% savings).
Automatic loop finder, pitch tracker and wave trimmer.
Destructive editing (death of the edit buffers).
Dynamic voice allocation (with priority possibilities).
Eight free modulators per channel with 14 sources and 12 destinations.
Incremental saving allows you to save only modified data.
Intelligent file system (handles multiple versions of a file, keeps track of where files are stored etc...).
Monophonic portamento mode and several other new playing modes.
New 25 kHz sampling rate.
New voice architecture with groupable parameters and much more.
Object oriented management of items (create, rename, copy, swap and delete).
Pre-triggered sampling threshold (prevents loss of transients).
Reads and writes AIFF format files (accepted by most sample editors).
Resample utility for any sampling rate between 3 and 50 kHz.
Stereo mode with pan parameter (requires two channels).
Stereo waves treated as a single wave.
Two independent LFOs and two four-stage envelopes per channel.
Up to 250 performances, 250 voices and 250 waves in memory.
Up to four times faster loading and saving.

DSI Mopho Keyboard Analog Monophonic Synthesizer

via this auction

Roland JUNO 6 analog synth

via this auction

x0xb0x synthesizer with Atomic Mods (Aluminum Case)

via this auction
"Item : x0xb0x synthesizer with Atomic Mod
Color : Black
Case : Aluminum
Surface : Oxide Coating + Shot Blasting
Printing : Silkscreen Printing
Knobs : Aluminum x 12 / Plastic x 2
Power Adaptor : 220V or 110V AC 9V
Weight : 1.3 kg
Condition : NEW

The additional mods give you variable new sounds and extra fun :

*Bass Boost – Bass Cutoff by one Octave

*Env Mod Low – Turn Env amount to a lower range

*Env Mod x 3 – Env Mod extend to 3 x the range

*Increased Filter Low End – Lower cutoff range to a degree

*Resonance Boost – Boost up the resonance

*Resonance Accent Increase – Boost up the Resonance Accent

*Variable VCA Decay – A pot to control Variable Decay

*Filter Modulation (VCO) - select the saw or the square as the modulation source independant of the what you have selected for the VCO

*Filter Modulation (VCA) - Taking the signal from the VCA out (C38) as the modulation source

*Devilfish Filter Overdrive - Overdrive effect

(Above mods can be switch off independently and switch back to original x0xb0x setting)
*Muffler Like Distortion - The DevilFish has a post VCA soft-clip distortion called "The Muffler" that apparently retains bass response."

Crumar Performer vintage analog synth

via this auction

CLICK FOR MORE »

Cluster Star Fox-8 & Cosmos Vibe-13

flickr By Efectos Cluster

Wall Paper
Fuzz with octave Up.

"Using the highest quality components available each pedal is built with the same attention to detail as the next."

MusikMesse 2011 - Moon Modular

YouTube Uploaded by accordoTV on Apr 8, 2011 http://lunar-experience.com/home.html

MusikMesse 2011 - Korg Monotribe

YouTube Uploaded by accordoTV on Apr 8, 2011

The main Monotribe post is here.

The Wisdom Of Wakeman - Minimonsta

YouTube Uploaded by GForceSoftwareTV on Apr 8, 2011

"Seminal Minimoog user Minimonsta GForceSoftware Minimoog Minimonsta:Melohman"
http://www.gforcesoftware.com/ins_minimonsta.php

MusikMesse 2011 - Haken Continuum

YouTube Uploaded by accordoTV on Apr 7, 2011

MusikMesse 2011 - Analog Systems

YouTube Uploaded by accordoTV on Apr 7, 2011
Analogue Systems
http://www.analoguesystems.co.uk/

Musikmesse 2011: Arturia Spark

YouTube Uploaded by baxshopnl on Apr 8, 2011

"http://www.bax-shop.tv | Bax TV doet verslag van de Musikmesse 2011 in Frankfurt. Arturia kondigde begin dit jaar de Spark drummachine aan. Op de Pro Light & Sound beurs toonde productmanager Romain Dejoie de Spark en legde uit wat de mogelijkheden van de hybride drummachine allemaal zijn."

MESSE11: Eowave Domino And More

040711

040711 from brownshoesonly on Vimeo.

brownshoesonly.com

Absynth 5 Overview with Brian Clevenger Part 1

YouTube Uploaded by thepluginguru on Apr 8, 2011

"Rate !! Subscribe !! Comment !! The creator of Absynth 5 joins me on an introduction to the way Absynth 5 works. This is Part 1 - Part 2 will be released early next week."

Update:

Absynth 5 Overview with Brian Clevenger Part 2

Uploaded by thepluginguru on Apr 9, 2011

"Rate !! Subscribe !! Comment !! The 2nd part of my overview of Absynth 5. So awesome that Brian Clevenger - the creator of Absynth joined me for this video."

Musikmesse 2011: Roland Jupiter 80 Synthesizer - New Demos

YouTube Uploaded by gear4music1 on Apr 8, 2011

"Gear4music.com get an overview of the new Roland Jupiter 80 synthesizer at Musikmesse 2011."

Roland Jupiter 80 Fantastic STUNNING sounds!!!

Uploaded by DonSolaris on Apr 8, 2011

"FANTASTIC SOUNDS of the latest Roland. The Jupiter 80 STUNNING!!!!!!"

The main Jupiter-80 post is here.

Using Livid Controllers with MLRV

YouTube Uploaded by lividTV on Apr 8, 2011

"I made this quick demo to show how to connect MLRV to the block or Ohm64. This is just the basics, I did this because people were seeming to have a hard time setting it up. It's a lot of fun when you get it going and the setup is actually super simple."

Another Schmidt All Analog Poly Video

See the 4/7 Update in this post.