Thursday, September 22, 2011
Synthwerks PGM-4x4 Preview.mp4
YouTube Uploaded by Synthwerks on Sep 15, 2011
"Preview of the Synthwerks PGM-4x4 Programmer/Sequencer video showing the basic features on the prototype PCBs. This modules is the first in a new family of Synthwerks sequencing and programming modules."
http://www.synthwerks.com/
VCS3 putney sonata #3 by Stomachlining
YouTube Uploaded by stomachlining on Sep 22, 2011
"This is a VCS3 solo, processed through a resonator. The resonating overtones are entered via a midi keyboard (the keyboard is not contributing any audio, its only duty is to send midi info to the resonator). The VCS3 oscillators slide past the chosen overtones producing a violin sound. The Putney's oscillators are controlling each other's frequencies, as osc.3 sends osc.1&2 sliding up & down (osc.3 CV is not inverted as it was on #5) & everything is ruled by the joystick.. all live... all VCS3"
the harvestman bionic lester
via the harvestman
"dual 12db/oct switched capacitor multimode filter with mode selction and clock disruption.
Bionic Lester is a dual multimode filter capable of many operational modes. Each side has dedicated lowpass and bandpass outputs, and the third output for each side can be switched between highpass, allpass, or notch. The input amplifiers for each filter are scaled to allow some distortion. The character of this distortion changes with the mode setting.
Bionic Lester has some normalled signal paths for convenient patching. The sum of the first channel's manual cutoff control and CV input are normalled to the CV input for the second channel. This allows you to control both filter sections with a single hand (or CV), useful for dual-peak or allpass phasing applications. The audio input for the first channel is also normalled to the second to facilitate parallel filtering. The filter cutoffs are determined by dividing down a high-frequency clock generator.
For the second channel, you can choose either the first or second channel's generator as a clock source. If you select both clock generators, absolutely horrifying audio garbage will result. A pushbutton control for selecting the desired amount of aliasing (minimum or maximum) applies to both sections. Resonance is voltage-controllable.
Because Lester is a switched-capacitor filter, the user must be warned of some of its characteristics. The aliasing, third output mode selection, and resonance settings are shared between both units. At lower cutoff frequencies, some aliasing may be present in the output signal depending on your resonance, aliasing, and mode settings, as well as the type of input signal. Bionic Lester does not self-oscillate using the onboard resonance control.
An expander unit will be released soon. It is a 2x3 bipolar mixer (with mutes) that invisibly attaches to Bionic Lester for patchcord-free mixing of the six outputs, with dual VCA feedback paths back into the filter sections. It also functions standalone as a performance mixer, with front-panel knobs and jacks that are also useful for injecting external signals and effects into the Lester core."
the harvestman polivoks VCG
via the harvestman
"Sawtooth-core VCO with 1V/octave tracking, manual octave switch, voltage-controllable pulse width modulation, and both linear and exponential frequency modulation. This is a Eurorack packaging of the Polivoks Generator circuit, authorized by the instrument inventor Vladimir Kuzmin. The exponential converter and temperature compensation circuits use original NOS Soviet integrated circuits. The hard sync is very sharp and the distortion on the triangle output is nice."
Tronsonic Dark Horse Kawai 100f Sample Set
via tronsonic where you'll find samples."This analogue monosynth from 1980 wasn't everyones cup of tea. Great for sci-fi effects but perhaps not the sweetest lead sounds. With this pack, both the sawtooth and square waves (as well as white noise) have been sampled to tape in their pure form (ie no filter/modulation etc). Now you have the ability to playback this 'mellotronized' monosynth with full polyphony - and here is where the magic begins! A truly unique analogue/digital hybrid synth has been born...the Dark Horse..."
Telemark Demo 01
YouTube Uploaded by AnalogueSolutions on Jun 14, 2011
"Demo of Telemark (semi?) modular suitcase synth.
More demos also at our sister YouTube channel ' rezfilter '"
The Dewanatron Novitiate
The Dewanatron Novitiate by Recondite
"Here is a recording which, excepting drums, was created entirely with the one-of-a-kind Dewanatron Novitiate made by the Dewan Cousins for the Bob Moog Foundation. It is monophonic, so multitracking was necessary. It is fully analog and housed in a very cool case. The Novitiate was designed to simply synthesis for educational purposes, but sounds great in the process."
Also see:
MoogLab Adds One-of-a-Kind Novitiate Educational Synth by Dewanatron
How to program a Roland TR-808 (64step beat!)
YouTube Uploaded by nvanzoeren on Feb 11, 2009
"A small demonstration about how to program a Roland TR-808
Sorry for my bad english, and please don't complain about the bad audio quality because this movie is just for educational use."
Also see:
How to program a Roland TR-909 in 3 minutes
magnum opus: analog textures
magnum opus: analog textures by bartonmusic
"After years of exploring and experimenting with the Buchla 200e Electric Music Box, I have now sculpted a little piece that pays homage to the depth, insight, intuition and imagination of its master-builder: Don Buchla.
This is my brief magnum opus to Don’s constellation of expressively and musically designed modules. All sounds were created on a 12-module Buchla system.
Some sounds where processed on the fly inside Ableton Live 8 using its stock delays and reverbs along with some chorusing from Sound Toys’ Crystallizer.
If you’ve got 8’30” to spare sit back with some good studio monitors or headsets and enjoy! All best wishes, Todd"
Chromeo at House of Blues New Orleans September 18, 2011
flickr By Offbeat Magazine
(click for more)
Sexy legs.
Moog Sonic Six and custom White Voyager in the background. Anyone ID the vocoder?
Update: looks like the Voyager might be the CustomSynth Chrome Voyager posted here. Nice catch via Suit & Tie Guy.
Modular Jam, Modded Gakken & DRUMFIRE / Drum Mixer / Synthesizer
Modular jam
YouTube Uploaded by vcs3dreams on Sep 22, 2011
"Featuring Monolith, diy sequencers, modified Gakken SX-150, In Line Effects Drum Fire drum synth module and body contact noise synth. Many of these pieces are for sale at etsy.com"
DRUMFIRE / Drum Mixer / Synthesizer
Uploaded by vcs3dreams on Sep 22, 2011
"5 channel Drum Synth. The first channel is also triggering the second channel = blue pad. The third channel is being triggered by the yellow pad. The fourth channel is being triggered by the orange pad and the Fifth channel is getting CV from the sequencer. All channels are clean except the First and Second.
For sale:
http://www.etsy.com/listing/82359305/drumfire-drum-mixer-synthesizer-synth"
Modified Gakken SX-150 analog synth
Uploaded by vcs3dreams on Sep 22, 2011
"Modified Gakken SX-150 + diy sequencer. The sequencer is feeding cv to the filter cut off and pitch in. Check the link for the list of mods.
For sale at etsy.com
http://www.etsy.com/listing/81933368/analog-synth-control-voltage-synthesizer"
"Features:
*Stylus and pad for pitch control
*LFO wave form switch with Sawtooth and Square wave forms
*LFO rate knob
*Pitch envelope knob
*Attack and Decay knobs
*Cutoff knob for filter
*Resonance on / off switch
*Ext. Source 1/8" in.
*1/8" output
*on / off switch
Here is a list of the Modifications:
*LFO 1/4" output with depth control and selectable wave form switch.
*CV in for Filter cut off
*Self Resonance Filter! With Resonance control knob. ( The self resonance filter produces a nice sine wave. You can now feed it CV and play the filter like an oscillator! )
*1/4" CV in for pitch control.
*Red momentary switch = instant LFO to CV pitch in.
*Custom wood case and panel."
YouTube Uploaded by vcs3dreams on Sep 22, 2011
"Featuring Monolith, diy sequencers, modified Gakken SX-150, In Line Effects Drum Fire drum synth module and body contact noise synth. Many of these pieces are for sale at etsy.com"
DRUMFIRE / Drum Mixer / Synthesizer
Uploaded by vcs3dreams on Sep 22, 2011
"5 channel Drum Synth. The first channel is also triggering the second channel = blue pad. The third channel is being triggered by the yellow pad. The fourth channel is being triggered by the orange pad and the Fifth channel is getting CV from the sequencer. All channels are clean except the First and Second.
For sale:
http://www.etsy.com/listing/82359305/drumfire-drum-mixer-synthesizer-synth"
Modified Gakken SX-150 analog synth
Uploaded by vcs3dreams on Sep 22, 2011
"Modified Gakken SX-150 + diy sequencer. The sequencer is feeding cv to the filter cut off and pitch in. Check the link for the list of mods.
For sale at etsy.com
http://www.etsy.com/listing/81933368/analog-synth-control-voltage-synthesizer"
"Features:
*Stylus and pad for pitch control
*LFO wave form switch with Sawtooth and Square wave forms
*LFO rate knob
*Pitch envelope knob
*Attack and Decay knobs
*Cutoff knob for filter
*Resonance on / off switch
*Ext. Source 1/8" in.
*1/8" output
*on / off switch
Here is a list of the Modifications:*LFO 1/4" output with depth control and selectable wave form switch.
*CV in for Filter cut off
*Self Resonance Filter! With Resonance control knob. ( The self resonance filter produces a nice sine wave. You can now feed it CV and play the filter like an oscillator! )
*1/4" CV in for pitch control.
*Red momentary switch = instant LFO to CV pitch in.
*Custom wood case and panel."
Yamaha PS-30 (1981) + Ti2 = demo 1 by Alba Ecstasy
YouTube Uploaded by adimsimion on Sep 22, 2011
"A demo of the rare Yamaha PS-30 (1981) versus Acces Virus Ti2.
You can read more about this beautiful Yamaha PS-30 here: http://weltenschule.de/TableHooters/Yamaha_PS-30_PS-20.html
I just picked this synth 1 day ago for about 50 bucks!
In this video, the Yamaha is passed by a reverb effect from Korg Radias.
You just have to see /listen for yourself and... comment!
Alba Ecstasy"
Mystic astronomy (Plogue Bidule, BlauKraut Engineering Charlatan VSTi and Audacity)
YouTube Uploaded by GruithuisenCityMan on Sep 22, 2011
"Hello ! My name is Frederic Gerchambeau. I have made this movie and this music. The music has been made using Plogue Bidule, the BlauKraut Engineering Charlatan VSTi and Audacity. Enjoy !"
"Hello ! My name is Frederic Gerchambeau. I have made this movie and this music. The music has been made using Plogue Bidule, the BlauKraut Engineering Charlatan VSTi and Audacity. Enjoy !"
Moon Modular 563E Trigger Sequencer EXP
via this auction
"The module format follows industry standard (synthesizers.com/ Moog/Curetronic/Mos-Lab etc.)
Module Size: 2 unit space
Trigger Sequencer Expander module for the M563 V2 Trigger Sequencer.
Each of the 32 step positions of the connected M563 V2 has now his own dedicated output jack. Note: M563 V1 sequencers can be upgraded to V2. "
Moon Modular 568A QTST Assistant
via this auction
"The M568A module is an addition to the M568 Module Quad Sequential Trigger Source. It expands the four trigger tracks of the 568 QSTS with a couple of useful features:
- each track has its own reset-input jack
- each track has two independent trigger outputs, which can be assigned to any desired step location
Assigning/deleting these positions takes place at the 568 QSTS module in combination with the, "Select A" and, "Select B" buttons at the 568A module:
Press and hold the select A/B button (set position on the 568 QSTS blink), press the desired position at the 568 QSTS.
If a 568P programmer module is attached to the 568 QSTS, the eight step-positions of the 568A will be saved together with the sequences.
- eack track has a 4-position rotary switch to select the 568 QSTS's running direction
Changing the direction (except random) doesn't happen at once but after the next reset (end/start/turning back on) of the respective track."
Moon Modular 511AC Quad VC Gate Delay
Note: Auction links are affiliate links for which the site may be compensated.
via NOISEBUG Reverb
"The module format follows industry standard (synthesizers.com/ Moog/Curetronic/Mos-Lab etc.)
Modules work with supply voltages of -12...-15 Volts/+12...+15 Volts
Two power connectors are on-board (synthesizers.com/Club of the Knobs),
Threshold voltage of the trigger inputs is +1 Volt.
The modules are ready to be used: insert the module, connect the power plug,
attach with a couple of screws and the fun starts...
The M511ac QUAD GATE DELAY combines four voltage controlled gate delay circuits in one module, which delay the incoming gate signals in a range from ca. 1 ms up to 20 seconds. Each delay unit hat its own pair of display LEDs.
The four gate in/outputs are internally connected like this:
Output 1 goes into input 2,
output 2 goes into input 3 and
output 3 goes into input 4.
This allows complex delay combinations without external patching.
The ‘Manual Gate’ button affects delay
input 1.
The time control voltage inputs are “chained“: i. e. a control voltage in the input 1 jack controls the inputs 2/3/4 as well, if there is nothing else patched.
(Input 1 is internally connected to +10 volts if nothing is patched).
Control range 0-10 volts, higher control voltages give longer delay times."
via NOISEBUG Reverb
"The module format follows industry standard (synthesizers.com/ Moog/Curetronic/Mos-Lab etc.)
Modules work with supply voltages of -12...-15 Volts/+12...+15 Volts
Two power connectors are on-board (synthesizers.com/Club of the Knobs),
Threshold voltage of the trigger inputs is +1 Volt.
The modules are ready to be used: insert the module, connect the power plug,
attach with a couple of screws and the fun starts...
The M511ac QUAD GATE DELAY combines four voltage controlled gate delay circuits in one module, which delay the incoming gate signals in a range from ca. 1 ms up to 20 seconds. Each delay unit hat its own pair of display LEDs.
The four gate in/outputs are internally connected like this:
Output 1 goes into input 2,
output 2 goes into input 3 and
output 3 goes into input 4.
This allows complex delay combinations without external patching.
The ‘Manual Gate’ button affects delay
input 1.
The time control voltage inputs are “chained“: i. e. a control voltage in the input 1 jack controls the inputs 2/3/4 as well, if there is nothing else patched.
(Input 1 is internally connected to +10 volts if nothing is patched).
Control range 0-10 volts, higher control voltages give longer delay times."
Moon Modular 564 Quad Sequential Switch
Note: Auction links are affiliate links for which the site may be compensated.
via NOISEBUG Reverb
"The module format follows industry standard (synthesizers.com/ Moog/Curetronic/Mos-Lab etc.)
Module Size: 2 unit space
Sequential Divider Switch,
a combination of a sequential 4-to-1/1-to-4 bidirectional electronic switch with clock divider.
Each switch has its own set-button for manual activation, trigger input (positive edge) and classic style indicator lamps.
One output/input-jack, four output/input jacks, clock input to shift the switch position. Four counter circuits, doubling as clock dividers, are connected in series with adjustable divider ratios.
Ratio switch positions
- SKIP skip step
- 1 shift after one clock pulse
- 2 shift after two clock pulses
- 3 shift after three clock pulses
-4 shift after four clock pulses
-8 shift after eight clock pulses
Each switch has its own gate
output: ‘on‘ as long as step is active)."
via NOISEBUG Reverb
"The module format follows industry standard (synthesizers.com/ Moog/Curetronic/Mos-Lab etc.)
Module Size: 2 unit space
Sequential Divider Switch,
a combination of a sequential 4-to-1/1-to-4 bidirectional electronic switch with clock divider.
Each switch has its own set-button for manual activation, trigger input (positive edge) and classic style indicator lamps.
One output/input-jack, four output/input jacks, clock input to shift the switch position. Four counter circuits, doubling as clock dividers, are connected in series with adjustable divider ratios.
Ratio switch positions
- SKIP skip step
- 1 shift after one clock pulse
- 2 shift after two clock pulses
- 3 shift after three clock pulses
-4 shift after four clock pulses
-8 shift after eight clock pulses
Each switch has its own gate
output: ‘on‘ as long as step is active)."
Moon Modular 565E Quantizer Controller
Note: Auction links are affiliate links for which the site may be compensated.
via NOISEBUG Reverb
"The module format follows industry standard (synthesizers.com/ Moog/Curetronic/Mos-Lab etc.)
Module Size: 1 unit space
The M 565 E Quantizer Controller allows to limit the output voltages generated by the M 565 v2 Quad Quantizer to any desired key, chord or note interval.
Using the array of 12 keyboard-like arranged toggle switches on the right, notes can be activated or deactivated in any combination.
The adjusted scale works over the whole quantizing range of the M 565 (10 octaves), and controls all four quantizing-units in parallel.
Up to two M 565 E Quantizer Controller modules can be connected to a single M 565 v2, which allows two different keys/scales to be used at once.
Quantizer 1 and 2 depend on the first quantizer controller, quantizer 3 and 4 on the second. The 12-position rotary switch transposes the output voltages of the connected quantizer(s) in semitone increments to the desired key
A M 565 v1 Quad Quantizer module can be updated to a v2, then allowing the connection of M 565 E Controller Modules.
Configuration of the M 565 Quantizer connected to one M 565 E controller module:
Option 1
M 565 E controls all four channels of the M 565 v2
Connect cable to the 565 v2‘s „Expander 1“ slot,
do not remove the jumper on the M 565 E.
Option 2
M 565 E controls only channel 3 and 4 of the M 565 v2
Connect cable to the 565 v2‘s „Expander 2“ slot, remove the jumper on the M 565 E.
Configuration of the M 565 Quantizer connected to two M 565 E controller modules:
The first M 565 E controls channel 1 and 2,
the second M 565 E controls channel 3 and 4
Do not remove the jumper on the first M 565 E,
connect cable to the 565 v2‘s „Expander 1“ slot.
Remove the jumper on the second M 565 v2,
connect cable to the 565 v2‘s „Expander 2“ slot."
via NOISEBUG Reverb
"The module format follows industry standard (synthesizers.com/ Moog/Curetronic/Mos-Lab etc.)
Module Size: 1 unit space
The M 565 E Quantizer Controller allows to limit the output voltages generated by the M 565 v2 Quad Quantizer to any desired key, chord or note interval.
Using the array of 12 keyboard-like arranged toggle switches on the right, notes can be activated or deactivated in any combination.
The adjusted scale works over the whole quantizing range of the M 565 (10 octaves), and controls all four quantizing-units in parallel.
Up to two M 565 E Quantizer Controller modules can be connected to a single M 565 v2, which allows two different keys/scales to be used at once.
Quantizer 1 and 2 depend on the first quantizer controller, quantizer 3 and 4 on the second. The 12-position rotary switch transposes the output voltages of the connected quantizer(s) in semitone increments to the desired key
A M 565 v1 Quad Quantizer module can be updated to a v2, then allowing the connection of M 565 E Controller Modules.
Configuration of the M 565 Quantizer connected to one M 565 E controller module:
Option 1
M 565 E controls all four channels of the M 565 v2
Connect cable to the 565 v2‘s „Expander 1“ slot,
do not remove the jumper on the M 565 E.
Option 2
M 565 E controls only channel 3 and 4 of the M 565 v2
Connect cable to the 565 v2‘s „Expander 2“ slot, remove the jumper on the M 565 E.
Configuration of the M 565 Quantizer connected to two M 565 E controller modules:
The first M 565 E controls channel 1 and 2,
the second M 565 E controls channel 3 and 4
Do not remove the jumper on the first M 565 E,
connect cable to the 565 v2‘s „Expander 1“ slot.
Remove the jumper on the second M 565 v2,
connect cable to the 565 v2‘s „Expander 2“ slot."
Moog MiniMoog Model D with Studio Electronics Mods
via this auction"It includes the Studio Electronics modifications but I am not sure whether they are working. "
Anyone know what they do?
Update via synthetic in the comments: "I have a Studio Electronics Midimoog with the same switches on the lower left corner of the unit. They affect how MIDI messages control the synth and oscillator sync. They are labeled: dyn vca, dyn vcf, mod vcf, aft vcf, aft mod, osc 2 sync. ("dyn" = MIDI velocity)"
Mattson 3X Experiment
via George Mattson"I was wondering if I could do a 'piano finish' for the case I'm going to make for my EML sequencer/ modular. [see these posts]
In a moment of insanity, I decided to do a test run by building a 3X wide horizontal case. I figured that if it worked, great! If it didn't, I'd still have something I could use.
One day of building out of canary wood and 15 days of coating, sanding, re-coating, sanding, etc and the final polishing process let me know that yes, I CAN do a piano finish. But, My EML project isn't going to get one :) It's a lot of work.I was trying to set it up where I could get a good angle to catch the reflective surface. Once I scrubbed the kitchen floor, it was as good as spot as any. Our cat decided to check out the new 'thing' that was invading the floor. I figured that it gives a good scale comparison. So, there he is, being a cat.
The case measures 44" W x 11" H x 3" D. It contains 36 module spaces.I decided that it was perfect for creating a system synthetically comparable to an old stock Moog 55. I researched the 'standard' module compliment from their brochure and had to sort out cross-generation compatabilities. I came up with the following modules that I'll need to create a comparable system:
6-VCO's
1-Noise
2-VC Dual LFO1-Sample/Hold
3-ADSR EGs
1-MIDI/CV
1-Envelope Follower
1-Quad AD/ASR EG
1-4X Gate Delay
1-8-stage Sequencer (which, I have to finish)
3-VCFs
1-Quad VCA
3-Full VCA's
1-4-channel Mixer
3-4X Buffered mults
3-4X VC Mixers
1-Utility 1
There was a lot of 'back and forth' due to some of the functions were standard within certain modules of mine.
Whether it's the same or not, who cares. It's going to be a lot of fun either way :)"
I wonder what the cat thinks. :)
meta.DJ Overview
YouTube Uploaded by soundtrends on Sep 22, 2011
"meta.DJ is the first app built from the ground-up for serious, quad deck DJ performance and to let DJs infuse dance production instruments and FX into their mix.
Now DJs can use their iPad to perform using Quad Deck/Device set-ups with up to 4 virtual devices at once. Devices include Track Decks with Cue/Loop Presets (for playing/manipulating iTunes tracks) plus electronic instruments like the drumtron drum machine, SaMPL3R (for adding arpeggios, basses, chord stabs and other musical parts) and Looptastic (for playing/mixing audio loops). Each device can be assigned up to 4 effects (from 15 different effects including Filters, Delay, Stutter, etc.) - all BPM-driven and under the control of an XY touch pad. Device Snapshots let the user swap devices in and out on-the-fly, complete with their content and mix information (level, FX , etc). An in-app store provides new Loop Sets by established 3rd parties and producers via.
meta.DJ includes demo tracks and Loop Sets content by DJ Puzzle (http://www.djpuzzle.com) and Myagi (http://www.myagimusic.com).
Meta.DJ requires iOS 4 or above and is available today for at an introductory price of only $9.99 in the Apple App Store."
meta.DJ - Sound Trends LLC
iPads on eBay
Oberheim SEM Pro CV/Gate/Midi
via this auction "new SEM Pro synth module, limited edition, signed by Tom Oberheim on the front. This is brand new unit, purchased 3 weeks ago from ROBOTSPEAK in San Francisco and still in the original box with the manual and power cord. This is the uber-deluxe "PRO" version that gives you the benefit of both MIDI and full CV/GATE connectivity..."
Download The Sounds of NASA
"Here's a collection of NASA sounds from historic spaceflights and current missions. You can hear the roar of a space shuttle launch or Neil Armstrong's "One small step for (a) man, one giant leap for mankind" every time you get a phone call. Or, you can hear the memorable words "Houston, we've had a problem," every time you make an error on your computer. We have included both MP3 and M4R (iPhone) sound files to download."
via Boing Boing
SONiVOX Unveils Wobble – Dubstep Grime Generator
"New technology synthesis engine coupled with pattern sequencer modulation control serves up the first virtual instrument dedicated to Dubstep productionSONiVOX, Boston MA, based award-winning music software company today offered a pre-release preview complete with MP3 and Video examples of the newest instrument from their NEMESYNTH Audio Research Group, Wobble – Dubstep Grime Generator.
Premiering the next generation of the spectral synthesis engine that powers SONiVOX’s TWIST and VOCALIZER, Wobble offers up a whole new control paradigm designed to deliver time/pattern-sequencer control over modulation parameters. This results in unmatched control and flexibility in creating new, unique, and evolving sounds, perfect for dubstep as well as most other electronic music creation.
Wobble features:- New Spectral Synthesis Engine creates traditional or blazing new dubstep sounds
- First of its kind Tempo-Synced Modulation Generator/Sequencer
- Over 200 fat & juicy dubstep presets that can be easily tweaked into thousands
- New interface design for seriously fast and easy sound designing
- Fully automatable via hardware or software control
- SONiVOX’s Intelligent Rhythm Control (I.R.C) putting your performance in perfect time in realtime
- Onboard chorus, tempo sync delay, and reverb fx
- PC Standalone, VST and RTAS Compatibility
- MAC Standalone, AU, VST, and RTAS Compatibility
Wobble marks the third release from SONiVOX’s NEMESYNTH Audio Research Group. Spearheaded by noted audio guru and scientist Jim Van Buskirk, pioneer inventor of the virtual instrument, modern computer driven sampling, and real-time low-latency convolution, SONiVOX’s NEMESYNTH Audio Research Group’s sole purpose is to discover, research, & develop revolutionary new enabling technologies for musicians everywhere.
Wobble – Dubstep Grime Generator is MAC & PC compatible and will work with most major DAW software as a VST, AU, and RTAS plugin.
Wobble – Dubstep Grime Generator is slated for a release date of October 1st 2011 with a MSRP of $149.99 and an estimated street price of $99.99
SONiVOX claims that Wobble must be heard to be believed and invites all to checkout the Wobble videos and mp3 examples at www.sonivoxmi.com
About SONiVOX
SONiVOX provides a multi-tiered suite of premier sound products that give voice to consumers ranging from professional musicians to over 100 million cellular users worldwide.
For years, SONiVOX, formerly Sonic Implants, has provided leading musicians and composers in the film and television industries with the tools needed to create world-class audio content for chart-topping movie, music and television projects.
Whether it’s high-end sound libraries & virtual instruments for leading Hollywood film composers, home-studio musicians, or millions of cell phone users, SONiVOX enjoys a worldwide reputation as a company producing "sound that rocks." For review copies and more information please contact SONiVOX at 617 718-0202 | info@sonivoxrocks.com. Follow SONiVOX on Twitter www.twitter.com/SONiVOX"
RGBSOUND Pro Now Available
"We have just released the PRO version of our RGBSOUND music app with new advanced and professional features for both professional and amateurs djs.The main features of this PRO version
✔Possibility to insert your own tracks in an easy way through ITunes
✔New analogic sounds created with Moog Voyager synthesizer by electro performer Valerio K Solari (http://www.veryelectromusic.com)
✔Accurate and professional control of BPM ratio and of PITCH shift of sounds thanks to the collaboration with DSPDIMENSION (http://www.dspdimension.com)
✔Drum machine mode
✔New shiny graphic
The app store link
RgbSoundPro - Francesco Cricchio
One of the videos to advertise the app
http://www.youtube.com/watch?v=G5tps7c-Pfc [below]
(a new video is going to be produced soon)"
Music App RGBSOUND - iPhone & iPad
RgbSoundPro - Francesco Cricchio
iPads on eBay
iPod Touch on eBay
Modular Peanut
YouTube Uploaded by SynthManiaDotCom on Sep 21, 2011
"Quick rendition of the classic Peanut Vendor with a Synthesizers.com modular and a Crumar Orchestrator. Rhythm by a Yamaha YPT-400."
TVSCV1b & atari punk console & TR808 & DEP2a
YouTube Uploaded by ggijs on Sep 22, 2011
"0:00 TVSCV1b & atari punk console (http://bit.ly/pGVSUu)
0:51 TVSCV1b & TR808 & DEP2a (http://bit.ly/oS2Ldh)
http://gieskes.nl/instruments/?file=tvscv"
TVSCV1b with script TVSCVS219 tutorial
Uploaded by ggijs on Sep 22, 2011
"http://gieskes.nl/instruments/?file=tvscv"
Roland Space Echo RE-201 jam, Tape Replacement & Reverb Tank
YouTube Uploaded by felmoe on Sep 22, 2011
"little jam ;)"
Roland Space Echo RE-201loop replacement
Uploaded by felmoe on Sep 22, 2011
"take a new loop into the echo ;)"
Roland Space Echo RE-201 Reverb Tank Accutronics
Uploaded by felmoe on Sep 22, 2011
"the new import from USA ;)"
serge with insane frequency test
YouTube Uploaded by DrOctave1 on Sep 22, 2011
"Some great frequencies in this one with the SSG and WAD TWS some crazy organic fun."
Patchable Body Contact Synth & Experimental Drum / Percussion Box
YouTube Uploaded by vcs3dreams on Sep 22, 2011
"Patchable body contact noise synth designed by Myc Beckman of Platonic World.
The synth will soon be for sale on etsy.com"
Patchable Body Contact Synth 2
Experimental Drum / Percussion Box 1
16-step Synthrotek analog sequencer with Ring Modulator and Yamaha cs-5
YouTube Uploaded by synthrotek on Sep 22, 2011
synthrotek on eBay
http://www.synthrotek.com
"This is a demo of out new Ring Modulator that will be in kit form in a few weeks. Features CV and Carrier Wave input. In this video I am using my 16-step sequencer in the CV input to adjust the frequency of the LFO. Check it - PURE analog effects!"
Vintage HAMMOND AUTO VARI 64 Accessory with Original Box
YAMAHA Synthesizer TX816 FM Tone Generator - 8 DX7s in 1
via this auction
"The TX816 is essentially 8 seperate TF1 synthesizer modules linked together. They can be operated off a single common MIDI input or on seperate individual MIDI inputs and each has its own XLR output jack (thats why we include the set of cables). By running the cables to a mixer you have 8 distinct synthesizer voices from 1 keyboard."
Data Cassettes for Various Synths
via these auctions
Cassettes listed:
Data Cassette for Korg Poly-61 & Poly-61M
Data Cassette for Korg Polysix Poly6
Data Cassette for Ensoniq ESQ-1
Data Cassette for Korg DW-6000
Data Cassette for Korg DW-8000
Data Cassette for Korg EX-800
Data Cassette for Korg Poly-800
Data Cassette for Korg Poly-800 II
Data Cassette for Roland Alpha Juno1Data Cassette for Roland Juno 106
Data Cassette for Sequential Circuits Prophet Five
Data Cassette for Sequential Circuits Prophet-600
Data Cassette for Yamaha DX9
Data Cassette for Yamaha DX11
Data Cassette for Yamaha DX100
Data Cassette for Yamaha TX81Z
Data Cassette for Oberheim OB-8
You'll also find patches, samples & manuals for other synths.
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
