€xtr@ct

Published on Jul 30, 2013 Ebotronix·716 videos

4ms Peg , RCD,VCAMatrix
Analogue Systems RS 100² , 4x RS 110, RS 360²
Bananalogue Serge VCS
Cyndustries Zero Oscillator one: quad outs to Antis exp in, via moddemix²
ZO two quadrature outs to VCA Matrix to 4x freqbox audio in
Doepfer A 114², A143-1,A 152,A156
4x A134 panning by A143-9,Maths
Flame 2x Chord Machines
Grendel Formant Filter 2x
Make Noise Brains,PP, Maths²,Moddemix,,Optomix,QMMG,René, Wogglebug
Malekko 4x Anti Oscillator , 3x Uncle,Noisering
Moog 4x Freqbox , CP251
Toppobrillo Quantimator , Sportmodulator,TWF²
SSL Modulation Orgy
Logic midi masterclock to Kenton Pro 2000
kick by RS 110 / QMMG
noises by Arp Odyssey 2811 & 2821,Noisering
FX Boss VF 1, Lexicon PCM 80 / 90Line6Echopro

I'll be there - ARP Explorer I (analog synthesizer from 1974)

Published on Jul 30, 2013 MrCaliforniaD·18 videos

"Here's what that wonderfull song could have sounded like if it was recorded on analog synthesizers from that era. It is kind of an early take on the king of pop concept!

This may sound like your average "General Midi" sounds but it isn't. EVERY sounds were made on this 1974 machine from ARP company.

To get polyphony from this monophonic synthesizer, I used "Notelogic", a VST that enables you to explode polyphonic midi tracks into your choice of voices (1 to 8). Each voice become an individual midi track that can be then passed through a monophonic synthesizer using a Midi to CV converter.

Thus, that particular song have 32 tracks for the instruments alone. The drums were made with EZdrummer and the vocal track is from the original song.

Fell free to ask me questions about this procedure."

Minimoog Model D Chiptune Videos by MrCaliforniaD

Published on Jul 4, 2013 MrCaliforniaD·18 videos

"Here's the Zelda Theme, as asked. The lead parts are simple triangle waves. The bass is a filtered square wave with variable attack and decay time. The drum part is filtered pink noise with some resonance and variable attack and decay time. EVERY voices were made with SINGLE oscillators."

Playlist:
Minimoog Model D - Polyphonic Processing - Zelda Theme from original Nintendo music
Minimoog Model D - Polyphonic Processing - Super Mario World Music (Super Nintendo)
Minimoog Model D - Polyphonic Processing - Tetris C (Game Boy)

Arp Explorer I Videos by MrCaliforniaD

Published on Apr 3, 2013 MrCaliforniaD·18 videos

"The Explorer I is a rare monophonic synth from Arp, released just before the well known Pro-Soloist.

Using an awesome VST called Notelogic by Xhip effects, I was able to record what a polyphonic Arp Explorer I would sound like. With this VST, you can expand the number of "voices" that you need on different midi channels.

Here is 2 x 4 voices + drums. A light reverb has been put on top of that."

Playlist:
Arp Explorer I - Polyphonic Processing - Mario Bros - 8 bit
Arp Explorer I - Polyphonic Processing - Beethoven Sonate Op 27 Allegro Molto E - Sawtooth Waveform
Arp Explorer - Polyphonic Processing - Castlevania 2 - Outside - Bloody Tears - 8 bit
Arp Explorer I - Polyphonic Processing - Megaman 2 - Quickman Stage - 8 bit

Maxikorg duophony

Uploaded on Oct 23, 2011 MrCaliforniaD·18 videos

"Analog sound. Impossible to recreate with today's synths."

Vintage Boss DR-55 Analog Drum Machine Synth SN 144700

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Sequential Circuits Prophet T8 SN 0043

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Sequential Circuits Multi-Trak Analog Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Prog Rock on a Casio Budget

Published on Jul 28, 2013 Pierre Fontaine·12 videos

"Showing off some of my Casio Keyboards with a little bit of Progressive Rock"

Mopho Programming In-Depth

Published on Jul 30, 2013 Gtechture·36 videos

"I wanted a Sid station but did not want to pay $1000 so i figured I'd program my mopho like it was a sid station and came up with this cool string of programs. The Mopho is actually pretty cool is you look at it as a 4 track sequencer."

Poly Generative Sequencer App For iPad

Published on Jul 30, 2013 ipadloops·19 videos

"Poly is a unique generative sequencer for iPad which harnesses the power of poly-rhythms to create intricate and exciting patterns.

Different coloured nodes are added to a circular area. The closer a node is to middle, the faster it repeats. Each node has its own sample, FX settings and keyboard. There are five available colours and up to 12 nodes maximum.

Poly comes with over 40 preset sounds, including a selection of awesome 808 samples.

Other features include:

- Audiobus integration
- Audio Copy and Paste (via In App Purchase)
- MIDI sync and Virtual MIDI out (via In App Purchase)
- Saving and Loading of Patterns
- Recording of performances
- SoundCloud upload and Dropbox upload and download (via the same In App Purchase as ACP)

MORE INFO HERE http://ipadloops.com/poly-generative-..."

iTunes:
Poly - james milton

KORG Volca Beats Internal Sounds

Published on Jul 30, 2013 AudioCentralMagazine·162 videos

"The KORG Volca Beats has six analog sounds (Kick, Snare, Lo/Hi Tom, Closed/Open Hat) and four PCM sounds (Clap, Agogo, Clave, Crash). In this video, there's a quick run on the internal sounds, with coverage of main parameters. Warning: do not attempt to hear sounds thru PC internal speakers... especially Kick sound goes very low. No music on this video, just internal sounds from Volca Beats."

KORG Volcas on eBay

ELGAM CAROUSEL Vintage Groovebox 1976 | HD DEMO

Published on Jul 30, 2013 AnalogAudio1·115 videos

"(c) 2013 by AnalogAudio1

The CAROUSEL is an interesting analog preset rhythmbox with accompaniment made by Elgam, Italy. It has rhythm (like the Elgam Rhythm Match series), bass, chord and 3 arpeggiators! Rare, obscure and very interesting! :-)

I played the Elgam Carousel along with a Roland DEP-5 for dely effects."

Original EMS Synthi E

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"THIS IS AN ORIGINAL EMS SYNTHI E from the seventies not a reproduction one. its in very good condition and very rare to find..."

CLICK FOR MORE »

D U B K A - The Nest - 02.08.13

Published on Jul 29, 2013

"Analogue Modular Performance @ The Nest 02.08.13"

Guessing the system features some Tiptop modules. via @tiptopaudio

"Martin Dubka's live set is up and running."

STG Soundlabs Mankato Filter Frac Modified for Eurorack

Note: Auction links are affiliate links for which the site may be compensated.

via this auction - cool white Moog knobs.

"This is basically the "frac-rack" design that has been modified to work in a Eurorack system. A couple things to note: there are a number of very small nicks in the surface which aren't really obvious except at certain angles. The circuit board is very deep, and measures very slightly under 6.75 inches from the back of the faceplate to the edge of the board. Please make sure to measure your case to ensure that it fits! Otherwise this module looks and sounds fantastic, and performs a number of duties beyond filtering - as an 8 phase LFO / VCO and with wave shaping capabilities when patching the outputs into its control inputs. This module is a one of a kind build for Eurorack and won't be found anywhere else! I have pasted the manufacturer's description below for your convenience. Please don't hesitate to contact me with any questions.

The Mankato Filter is a four-pole lowpass filter with positive and negative outputs at every pole, giving you slopes of 6 dB/oct, 12 dB/oct, 18 dB/oct, and 24 dB/oct simultaneously. the negative slope outputs allow you to use the Mankato as a quadrature sine oscillator with 8 available phases. the Mankato will self-resonate from subaudio to superaudio, and responds to one volt per octave through its unattenuated control inputs. the signal inputs are DC coupled, which allows you to use the Mankato as a voltage-controlled slew limiter..."

The Mankato was designed by Thomas Henry and named by Magic Smoke Electronics.

CLICK FOR MORE »

Analogue Solutions Concussor Modular Drum Synth

Note: Auction links are affiliate links for which the site may be compensated.

via this auction
(more pics at the auction)

"Made by Tom at Analogue Solutions, in about 2006.
Fantastic sounding modules. Home use only.
The 78 suffix means that the circuitry is based on the CR78, the 99 means based on the TR909, and 88 means the TR909.

Rack 1

MT1616 x Midi - Trigger
VCA2VCA
GT8Dual Channel Gate Sequencer
SQ8CV Gate Sequencer
MX224Mixer / Inverter
MultMultiple
Mult Multiple
HP01Headphone Mixer / Amp

Rack 2

SD78Snare
SD99Snare
SD99Snare
CB88Cowbell
CP88Clap
HH88Hi-hat (Dual)
HH88Hi-hat (Dual)
HH88Hi-hat (Dual)

Rack 3

BD78Bass Drum
BD78Bass Drum
BD78Bass Drum
BD99Bass Drum
BD99Bass Drum
BD99Bass Drum
BD99Bass Drum
TC88Tom / Conga"

KORG Volca Beats Motion Recording

Published on Jul 30, 2013 AudioCentralMagazine·161 videos

"KORG Volca Beat has two Motion Recorder for track parameter variations in Stutter Delay Depth + Time and PCM Sounds Playback Speed. While in Record, you can automate parameters and, with a bit of skill, you can enhance the whole pattern. Not easy as it seems, but effective."

SOA

Uploaded on Apr 28, 2011

"Experimental Electronic Music"

via Friends of Synthesizers.com on Facebook
http://synthesizers.com

TEISCO SX-400 Demo Video

Published on Apr 21, 2013 MIxbern·35 videos

"Polyphonic synthesizer with 4 oscillators and a lot of things :)"

More Info on the Doepfer A-190-4 USB/MIDI-to-CV/Gate/ Sync Interface

via PatchPierre.Net where you'll find additional info.

"He [Dieter Doepfer] replied to me that the A-190-4 will replace the A-190-1 as the A-190-1 has been developed more than 15 years ago and is a bit old-fashioned and long-winded to operate.
Mainly the missing display has been complained by several customers (i.e. no display of the parameter like midi channel, reference note, scale settings, portamento and pitch-bend range, clock divider, status of the built-in (software) LFO and so on).

The basic functions of the A-190-4 will be the same as the A-190-1 but the man-machine interface will be better because of the display that shows the parameter value. It will also be equipped with USB..."

Follow-up to this post.

Minimoog Model D and Synthesizers.com Sample and Hold

Uploaded on Jul 27, 2013 Ollie Eastwood·No public videos

via the Friends of Synthesizers.com Facebook Group
http://synthesizers.com

UnkleSleazy's Instruments

Three pics via Pacmasaurus's flickr set. (click through for more)

via Boing Boing (via @chris_carter_)

"Hand-made acoustic/electronic instruments played by the late, great Peter "Sleazy" Christopherson of Coil and Throbbing Gristle."

One of a Kind Custom Roland TR-808 Drum Machine - Mind the Step

Note: Auction links are affiliate links for which the site may be compensated.

via this auction - spotted and in by @dyLABs

"One of a kind TR-808! Case was removed to enable all of the mods. This 808 has been unleashed into a whole new realm of mind blowing. It really is something to behold for live sets, both visually, and the sounds that can be achieved are guaranteed to rock any dance floor. The case and lid are effectively integrated to take it on the road with confidence. All the mods are completely stable. The previous owner did the work, and I have used it for the last 6 years without fault. I'm sorry to see this go, but I'm just not writing enough tunes these days to warrant having in my studio. A collector may be horrified by the non-standard look, but performers/producers will really appreciate the versatility and depth added to the 808 sound. And besides, these drum machines should be played, not placed on the shelf!

It also has a KADI port added so you can fully MIDI integrate using a Kenton Pro KADI (not included - see my other auction). Recommend using it with the Pro KADI if you plan to compose using a PC/Mac software package.

Bassdrum

-Pitch control added (lowest point is gut churning low and highest is up with conga pitch)

-Pitch bypass added to quickly revert back to the original Bass Drum pitch

-Decay range expanded to allow zero to self-oscillation

-Decay bypass added to quickly revert back to the original Bass Drum decay

-Tone range expanded to enable sound adjustment from smooth as silk to a snappy crack

Snare

-Decay added to enable nil up to 50% - makes an awesome effect for break downs and build ups

-Noise filter added with sweepable cutoff

Toms (LT/MT/HT)

-Conga switch removed (not needed) with tune range increased to 5 x original amount from Tom to way above conga

-Decay range modded to start from zero (ie. isolate the reverb that can be annoying) to 50% greater than self oscillation

-On/off reverb switch added - isolate the reverb in an instant

-Reverb amp added (lowest point original, highest = 10x original)

-Reverb length added - can shorten to a snap to sound 909-like

-Oscillator on/off switch added to play just the reverb - can achieve some truly tripped out glitch effects when combined with the other controls

Rim Shot

-Rim shot and claves circuits now split into two modular parts. Half of the Claves sound can be sent into the Rim shot circuit to create a high pitched sound and half of the Rim Shot can be sent into the -Claves to produce a cool resonant blip.

-The original sounds for both can be easily recalled with an easy press of the respective sound half circuit patching switches.

-Added a Rim Shot oscillator filter installed (only works with the original circuit path)

Clap

-Clap noise source filter (basically a pitch/tune control)

-Clap reverb level added, adjustable from 0 to 120% of the original level

-Clap width control added, but it looks like this mod has resulted in the clap stuck on a long distant sound. When I originally bought the 808 the guy who did the mod indicated it is a very easy fix for someone handy with a soldering iron. I never got around to doing it and wasn’t too fussed about not having the Clap.

Cymbal

-Cymbal oscillator mixer added so it is possible to individually isolate the three oscillators that make up the cymbal sound.

-Cymbal Osc. 3 modified to enable range control. Osc. 3 is the original source for the adjustable cymbal decay. It can now be dialled down to zero.

-Cymbal Osc. 3 distortion switch added – this sounds really cool.

Note: Cowbell, Maracas and HiHats are original with no mods. The Accent is still original too.

New Modular Output Section:

-12db multimode diode ladder filter installed with patchable input section from all the different percussion instruments.

-Any instrument can be or combination of instruments can be filtered AND switched in and out of the filter. It is such a simple thing, but absolutely awesome when playing a live set.


Non-Sound Mods:

-Original power supply replaced.

-All switches and pots replaced

-The Tempo range was changed (via a quality pot with greater resolution) and fine tempo deleted. Din sync still available, but I always went with the Pro-KADI.

-All wiring was replaced and upgraded.

-Memory backup was installed via a 4.5v battery pack plug. Unfortunately the standard memory only lasts a couple of hours. Although I never really bothered with it that much and just wrote down patterns or used Cubase. I only really used it sometimes before heading out to play a set.

-New sturdy case (everything was transplanted over)

More Info:

The filter is a little noisy and picks up some noise from the 808 trigger lines. This sounds absolutely stunning when the background noise is used to self-oscillate the filter, or the trigger signal of an instrument is used to create a worble like techno baseline .However if you want to play without the disturbance from the filter, its output can be switched off. With the filter off, the filter instrument patch sounds act like mute switches, which is also great for cutting on the fly.

When using with Cubase for composing, you can trigger each instrument individually on the virtual keyboard.

Only issue is the “2nd part” in the sequencer to extend steps from 32 to 64. For some reason it doesn’t work, so basically stuck with only 32 steps. I.e. the “1st part” with Parts A and B work perfectly, as does the Autofill function as well. The illuminated switches look unreal on stage and the large pots have a great feel!.."

Arturia MiniBrute : petit mais costaud ! ( La Boite Noire )

Published on May 17, 2013 La Boite Noire du Musicien·1,271 videos

"Petite taille, gros son analogique, le Minibrute est le nouveau synthétiseur analogique d'Arturia. Avec un traitement sonore 100% analogique et de nouvelles fonctionnalités innovantes, il établit un nouveau standard en matière de puissance sonore. L'ocscillateur à ondes multiples combiné à un filtre classique multi-mode d'une sonorité phénoménale, et un large éventail de possibilités de modulation, apporteront une nouvelle vie à vos enregistrements et à vos performances scéniques. http://www.laboitenoiredumusicien.com"

Minibrutes on eBay

New Intellijel Dual ADSR Eurorack Module Based on Roland SH-101 - Demo Video

Intellijel Dual ADSR demo#1 from Danjel van Tijn on Vimeo.

"The Intellijel Dual ADSR:

-Based on the Roland SH-101 design with several enhancements.
-Manual GATE buttons
-Three timing ranges
-Normal and inverted outputs
-End of Decay (EOD) logic output
-Cycle mode
-Dynamic level control of the VCA output via built in linear VCA
More details at www.intellijel.com"

Roland SBF 325 Flanger

Note: Auction links are affiliate links for which the site may be compensated.

Some new pics for this auction.

CLICK FOR MORE »

Barok on Alesis Fusion

via Thierry Lebon on The MATRIXSYNTH Lounge

"my last night improvisation with Alesis Fusion ... ma dernière improvisation nocturne avec Alesis Fusion ... cheers / salut pour les frenchies !"

*NEW* TENORI-ON + NORD MODULAR - work in progress - STAGE 1

Published on Jul 30, 2013 michal23pl·81 videos

"this is a first stage of making a song. just a bunch of sequences programmed in Tenori-On which is triggering 4 individual patches in Nord Modular G1."

via Michal Patulski on The MATRIXSYNTH Lounge

Update:

*NEW* STAGE 2 - bass recording for the new track

Published on Jul 30, 2013
just a simple bass riff on my fretless Fender Jazz Squier

STAGE 3 - pads on Nord Modular G1 and faders automation
Published on Jul 31, 2013

"the song recording is almost finished. just a one more thing..."

STAGE 4 - recording vocoder vocals on Nord Modular G1
Published on Aug 1, 2013

"honestly it's hard to understand anything, but I kinda like it :P"

STAGE 5 - KORG MS10 sounds and shit (vocoder singing cancelled)
Published on Aug 2, 2013

"uhh I'm fed up with this tune. fuck it. this is a final version (it's not mixed properly yet though). thanks for listening and watching."

KORG MS-20mini DEMO :Tajima moog vja

Published on Jul 30, 2013 nicolai maruhama·92 videos

"This song is about the Barong in Bali Island.
I express her Voice with Sample and Hold that is controlled by wheel.

nicolai maruhama"

KORG MS20 Minis on eBay

Frenglish Makenoise Maths Lessons 2 : Attack/Decay/Release/Cycle enveloppe

Published on Jul 30, 2013 heodesalciphron·120 videos

"Exploration de l'utilisation en tant qu'enveloppe simple
attaque descente, attaque relâchement et enveloppe cyclique
Quelques idées de patch avec pressure points
Enveloppe exploration AD, AR, Cycle.
* annotations inside the video in frenglish"

Make Noise vocal patch.

MFB Dominion X SED Programmable Analogue Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Synthesizer with new SED filter

The Dominion X is MFB's latest synthesizer. It combines analogue synthesis, programmability and modular patching. With advanced circuits, increased functionality and a new design, the Dominion X is the first of MFB's next generation musical instruments.

The Dominion X offers 3 x oscillators for maximum flexibility. Each waveform can be varied in symmetry. Besides altering the pulse width of a rectangle, you may also continuously turn a saw tooth into a triangle and a triangle into a sine. All oscillators also offer ring modulation. In addition, VCO 2 and VCO 3 can be synced to VCO1. Finally, VCO3 can modulate the frequency of VCO 1 and VCO 2. The analogue oscillator circuit is processor-controlled for stable tuning. To complete the available sound sources, noise or an external audio input can be added to the VCOs in the Dominion X's mixer section.

The filter offers 6 x operation modes. Available are 3 x low pass variations with 12, 18 and 24 dB/oct. slopes. Also available are high pass-, band pass and a notch filter with slopes of 12 dB/oct. respectively 6 dB/oct. Variable filter modulations are possible via an invertible envelope, keyboard tracking, LFO, VCO, different MIDI controllers as well as by the use o the CV-input.

The 2 x ADSR-type envelops are internally routed to the VCF- and VCA-sections. In addition, envelope 1 can also modulate the VCO section. LFOs 1 and 2 offer six waveform shapes including sample & hold. They may be switched to one-shot-modes to emulation simple envelopes. A third sine-LFO works in combination with a keyboard's modulation wheel and can dynamically address the VCO, VCF and VCA sections.

Modulations are assigned by the use of selector switches, located at the destinations. This allows easily setting and re-routing internal modulation paths, ideally for your live-performance.

To integrate external modulators, control- and audio sources, the Dominion X offers 9 x inputs. Therefore, oscillators, filter, VCA, CV/gate and mixer can be easily combined with other analogue synthesizers such as MFB's Megazwerg, analogue sequencers such as MFB's Urzwerg Pro or modular synthesizer systems.

An additional selector switch allows assignment of velocity for up to eleven modulation destinations.

The Dominion X offers 128 x programmable patches for your personal sound creations. To support sound programming without an attached keyboard, different demo sequences are available. To use the Dominion X as a filter box for external audio sources, the VCA can be opened permanently. Finally, there is an insert available to integrate an effect or distortion unit into the signal path.

The Dominion X has the following dimensions: 330mm x 170mm x 60mm. An external power supply is included.

The new SED filter design contains 2 x different types of filters. Once is the 12 dB MFB multifilter with 12 dB lowpass and 12 dB highpass, bandpass und notch. Sound can be described as clean and powerful with steady catchy resonance behaviour. The second is new SED filter with 24/12 dB lowpass. This single ended discrete (transistors) filter can be driven into clippng zone, especially the 12 dB variant. The 24 dB lowpass can be sound almost clean when you drive the vco mixer below half of possible value.

Features

3 x VCOs with wave shaping and ring modulation
Dual-Sync and Dual-FM features
6-fold multimode-filter including 3 x low pass configurations with 12-24 dB
Patch-section for external CV/gate-control
Velocity routing matrix with 11 x destinations
3 x LFOs with 2 x LFOS offering one-shot-modes and reset
MIDI I/O and thru"

GEM GENERAL MUSIC S2R Music Processor Synth V 4.2 SN 099200190

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

The only synth with a "CLIPBOARD" button? What does it do?

CLICK FOR MORE »

E-MU EMULATOR E3 EIII XP 6100 Synthesizer Sampler SN 099200190

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

STUDIO ELECTRONICS SE-1 SN 1532

Note: Auction links are affiliate links for which the site may be compensated.

via this auction - Note the low BIN is because this unit does not power on. Posting for the pics.

CLICK FOR MORE »

Turing Machine Random Looping Sequencer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"This is a newly-built Turing Machine Random Looping Sequencer in Eurorack format. It has aluminum Grayscale panel, bolted-on main pot, blue LEDs (rare!), and backpack module to allow connection to expander modules."

Crumar Steiner EVI - Electronic Valve Instrument w/manual SN #110

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"This is a Crumar EVI (Electronic Valve Instrument) designed by Nyle Steiner, made in Italy around 1980. These were made for brass players who wanted to double on synthesizer. I inherited this instrument from its original owner and it has sat unused for some time. The unit itself is in very good condition with minor paint chipping. The case exhibits signs of age. The serial number was actually handwritten with Magic Marker #110.

I've tested it to the best of my ability and everything seems to function correctly.

Weight: 7 lbs, 11 ozs
Size: 18.5" x 5" x 6""

CLICK FOR MORE »

Waldorf Nave Killer Sound Design w iElectribe & Genome

Published on Jul 30, 2013 Mee Zanook·53 videos

"Genome Sequences Nave and Electribe while killer Mee Zanook sounds are previewed via Nave,we then go over creating these monster sounds from scratch!"

iTunes:
Nave - Waldorf Music

iPhone as a Multi-FX device: Vocalive, MIDI Monitor and iRig HD

Published on Jul 30, 2013 Marcus Padrini·181 videos

"Your iPhone can be a great Multi-FX device with easy control for live performances. Here I am using my old iPhone 4, Vocalive (IK Multimedia) with 3 effects (Reverb, Chorus and Delay) being controlled by MIDI Monitor, a free app with some faders and knobs.

The demo song was recorded using: Arturia Minibrute (via iRig HD), Moog Slim Phatty and Korg Monotribe.

Seu iPhone pode ser um ótimo processador de efeitos com fácil controle para performances ao vivo. Aqui estou usando meu velho iPhone 4, o Vocalive (IK Multimedia) com 3 efeitos (Reverb, Chorus e Delay) sendo controlador pelo MIDI Monitor, um app gratuito com alguns faders e knobs.

A música de demonstração foi gravada usando: Arturia Minibrute (via iRig HD), Moog Slim Phatty e Korg Monotribe.

http://musicapps.com.br"

iTunes:
IK Multimedia

Roland SH-101 Vs TR-909 live session

Published on Jul 30, 2013 Nigel Cruickshank·10 videos

"A simple live session with the Roland SH-101 Vs TR-909 recorded from the output of an Soundcraft 200sr mixer through a Steinberg MR816x interface. No additional editing, EQ, effects or compression has been added. Just the boxes, unmixed, into a laptop.
My apologies for the Ken Burns effect, I recorded the video stream seperately and ran out of space and hence lost the video.

Just a simple 1 bar sequence with the sequencer of the 101 triggered from the rimshot of the 909."

Cellular Automata sequencer panel - 1st recording

Published on Jul 30, 2013 cirtcele·88 videos

"First play with my Cellular Automata sequencer panel. Probably best just to read about it here - http://nonlinearcircuits.blogspot.com..."

639 sp1200 only

Published on Jul 30, 2013 Rob The Viking·34 videos

Virus TI Darkstar / Depeche Mode Wallpaper

"Recklinghausen, Germany. Access Music, the company behind the award winning Virus synthesizers offers the Virus TI Darkstar again. The Darkstar has the same appearance and features like the Virus TI Polar but comes in a gun metal colored housing with red LEDs and logo light. Designed for both live players and studio musicians, the Darkstar is build like a tank and features a 37-keys action keyboard with aftertouch. Connected via USB to a computer, it seamlessly integrates into many modern DAWs using a VST/AU/RTAS compatible plug-in.

The Virus TI Darkstar is available now and can be ordered through Access' worldwide dealer network or from their online store. Mode details can be found here: www.virus.info/darkstar

To celebrate the Virus TI, Access releases a rare picture taken at the Berlin Olympia stadium right before Depeche Mode entered the stage. The wallpaper can be downloaded here: http://www.virus.info/dm"

Karma-Lab Releases Major Updates to Korg-related KARMA Software

"Westfield, NJ, July 29, 2013 - Karma-Lab, the developer of the KARMA interactive music technology featured in Korg Workstations, has released a major update to four of its Korg-related software applications:

• KARMA Kronos Software - for the Korg Kronos

• KARMA M3 Software - for the Korg M3

• KARMA M50 Software - for the Korg M50

• KARMA Oasys Software - for the Korg Oasys

Version 2.2.9 of each program is available for both Mac and Windows. The update is free to registered users and available for purchase directly from Karma-Lab (US $169 to $199).

The new Mac versions are now Universal applications, and will run on Mac OS X 10.4 and higher, including 10.7 Lion and 10.8 Mountain Lion, PPC or Intel. They've also been tested on the Developer Preview of 10.9 Mavericks without any major issues. Furthermore, some enhancements such as the ability to import and export .KGE files between all four applications have been incorporated, along with a lengthy list of reliability enhancements and bug fixes.

The new Windows versions include all of the same enhancements and bug fixes as the Mac versions, and runs on XP, Vista, Windows 7 and Windows 8 (32 and 64 bit).

KARMA Kronos, KARMA Oasys and KARMA M3 software allow the in-depth editing of the many hidden KARMA parameters of the keyboard, and allow for the creation and editing of user GEs which can then be uploaded to the keyboard. KARMA M50 software provides all of the KARMA features, grooves and sounds of the Korg M3 to users of the Korg M50.

More information can be found at karma-lab.com

About Karma-Lab

Founded in 1994 and based in Westfield, NJ, Karma-Lab is a provider of software for music and sound creation. The company has developed the KARMA features, software and sounds for a wide variety of Korg keyboards including the Korg Karma, Triton, OASYS, M3, M50 and Kronos, and its award-winning KARMA technology is covered by 11 US Patents. Karma-Lab has also recently released software and sounds for the Yamaha Motif XS and XF series. KARMA technology is used worldwide by tens of thousands of users, for applications including audio production, song-writing, film/TV soundtracks, live stage sound, club remixes, computer game sound, and multimedia applications. Find out more at karma-lab.com"