MATRIXSYNTH: Sunday, June 21, 2015


Sunday, June 21, 2015

Zaquencer Korg Volca Jam


Published on Jun 21, 2015 Jason Dale

"Jamming out with Zaquencer and the Korg Volca Beats, Bass & Keys. It's all about the bass, synth bass lol!"

Yamaha Reface Is Coming - New CS/SY Series Influenced Synth in the Works?


Uploaded on Jun 16, 2015 Yamaha Corporation of America

New Yamaha CS series?

1. Note the ring mod throughout the audio in the video.
2. What is that at :03? Yamaha SY-1 style levers?
3. Main synthesizer in techno at :05?
4. Seems like a piano player made the keys at :07. CS80 keys?
5. What is that at :09 - :10? SY/CS style levers & different style rocker switches?
6. Take me down memory lane at :19?
7. Ends with a nod to Yamaha CS series pipe dream at :24.

Update: looks like we'll know in 15 days: https://yamahasynth.com The tagline states: "Get ready to create your sound any place, any time."

Yamaha An1X 61-key Analog Modeling Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

wicks looper - Lo-fi Synth Noisemaker

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Haven't seen one of these in a while.

"You press the button to make a sound. When you let go of the button, the machine loops your recorded sound over and over again. You can tweak the knobs to change the sounds and record the changes by pressing the button as you turn the knobs!

Makes very dirty, lofi, chip sounds.

You can also adjust the tempo at which it plays back your loop... From very slow to very fast.

This is a rare, interesting, unique noise instrument!"

11 Dub ft. OJ Da Juiceman - I'm Workin' (Malfunkn's Four Minute Abs Mix)


Published on Jun 20, 2015 Houston Guy

"11 Dub ft. OJ Da Juiceman - I'm Workin' (Malfunkn's Four Minute Abs Mix)
Performed live at Catalyst Studios dtla, 2015 by Malfunkn.
Support Malfunkn at: https://www.patreon.com/Malfunkn

Gear Used:
Elektron Octatrack
Elektron Analog RYTM
Future Retro Revolution

http://www.malfunkn.com/"

Vintage Hohner String Performer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

FAT Freebass 383 heavily modded

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Here is this great and rare mono synth the FAT Freebass 383 with all sorts of mods.

This is a fine Roland TB - 303 clone and can be played via midi as a synth module which is great fun and something you can't do with a 303.

The midi channel can be set via the switchers on the back. It is currently set to ch6.

Modifications are as follows.

FM - On / off and input.
PWM - On / off and input.
CUT off - input
RES boost - on / off
ENV amount - input

All ready for an envelope or LFO signal from any other gearbox may have."

Wiard 300 Borg filters


Published on Jun 21, 2015 DavidH

"lpg, filter..."

Audio Damage Axon vs. AudioMulch


Published on Jun 21, 2015 nick rothwell

New MODOR NF-1 Demo


Published on Jun 12, 2015 obscure wave music obscure wave music

"NF-1 demo by obscure wave music. All sounds are only the NF-1, except the drums, a drum loop from Reason . Multitracked in Reason, no fx used except for some mastering tools. All parts played live, with tweaking of the NF-1, mainly the filters and the delay feedback. The NF-1 is a brilliant psychedelic machine !"

See the Modor Music channel below for more.

Ibanez AD190, Zaquencer, Analogue Solutions Semblance


Published on Jun 20, 2015 obscure wave music obscure wave music

"Demo with Analogue Solutions Semblance, Ibanez AD-190 and Zaquencer from Zaq Audio.

The Semblance has a wonderful, smooth filter, but the instruments midi response is, in my opinion, catastrophic. So I modified it to respond to CV/Gate instead, hence the Kenton Prosolo. The Semblance is now much tighter.

The Zaquencer: a real gem, pure genius from Christian Stöcklmeier !

The AD-190 has its last days in my studio...it gets a new home. Warm, organic....a delightful piece of kit.

At times, in the demo, the input of the AD-190 gets overdriven...
only ads to the " analog charm ".....

Thanks for watching."

Roland JD-Xi - How to record a pattern sequence with special guest DJ Hush


Published on Jun 21, 2015 Ed Diaz

"Hello everybody, here's a video that I shot with my nephew, DJ Hush, while he was staying with me. As you can you see, DJ Hush was a very good listener and was able to easily record a pattern sequence."

First Time Playing the MFOS WSG


Published on Jun 21, 2015 Sir Kel

"This is Penny's first time playing her new MFOS Weird Sound Generator. We changed the name of it to 'Penny's Sound Box' and painted the custom box pink (can you tell she likes pink?). A very special thanks to Linds and Jo Redding for the project."

Sequencing the new 'Landers' EP


Published on Jun 21, 2015

"Sequencing a section from the new Arcane EP 'Landers' due out soon at https://paullawler.bandcamp.com/

In this example the Studio 110 is sequencing both it's own oscillators and the Moog Voyager XL."

Don't be cold (in the Summer of Love) - Stupid Set Live Synthesizers with Akai Mpc 2500


Published on Jun 21, 2015 jerry dibella

"This is a live impro version of The Stupid Set song Don't be cold (in the Summer of Love) made with Akai MPC 2500 sequencing the Moog Voyager on the Bass Synth, Roland Juno 60 and Yamaha DX7 Supermax; filmed with my iPad"

Vintage Style Roland 303 606 leather case

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"You are viewing a custom made leather protective case for a Roland 606 or 303. 1 of 3 prototypes made for Roland Canada. As you know the original plastic dust covers are very pricey and do very little to protect the item inside. this is a huge step up for any artist using these machines who may be gigging live and traveling with it or just want to keep dust and liquid accidents off it in the studio. the leather is conditioned and will repell liquids. It has the Roland logo embossed into the top cover flap. The case is assembled with heavy duty copper rivets and button snaps. the case is numbered on the bottom, in this case it is #3 of 3 made with makers stamps embossed into bottom. It has a sturdy black foam in the bottom of the case."

Korg Sigma Vintage Monophonic Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

" A strange synth in many ways with an 'instrument' section as well as a 'synth' section with the ability to blend between the two. Each can be detuned to create nice fat bass lines and leads. It has the most amazingly playable keyboard with brilliant touch sensitivity / aftertouch style options - vary pitch and modulation using keyboard sensitivity. Although the 2 plastic joystick caps perished a long time ago the 2 joysticks are fully operational and assignable (this company provides replacement joystick caps for 50 euros if you'd like to bring it back up to full spec)

By no means the most versatile or fully featured synth but it's fantastic for turning to when you're running out of inspiration ploughing through the soft synths - i run this through some guitar pedals and always find a sound that i can't get elsewhere - and these sounds always seem to sit in a mix so well - fat but transparent if that makes sense!"

Roland TB-303 Devil Fish

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"This auction is for a Roland tb-303 that has all the Devil Fish mods by Robin Whittle. The red LEDs have been replaced with blue ones and all pots and tact switches were replaced by Robin.

The mods include all the I/O and sound shaping enhancements, MIDI and extended memory bank. Included with the 303 are the Devil Fish manual, power supply recommended by Robin, as well as the DIN/MIDI daisy chain cord and audio/control cords provided by Robin.

This 303 is in perfect working order, looks great and sounds acid.

Also included in this auction is a Roland tr-707. The 707 is in perfect working order except for the snare voice which no longer sounds. There is no power supply for the 707."

Teenage Engineering Releases New TB-1 Beer


via Teenage Engineering on Instagram

"First batch of our own beer TB-1"

via Palm Sounds

Goldilocks Analogue - Synthesizer Waveforms


Published on Jun 21, 2015 ThreeDRaymaker's channel

"Synthesizer application with Goldilocks Analogue and the FTDI EVE Gameduino 2 Shield.
http://feilipu.me/2014/12/06/goldiloc...
https://www.youtube.com/watch?v=nFg9N..." [embedded below]

via feilipu:

"For the past year, I’ve been prototyping an Arduino clone, the Goldilocks Analogue, which incorporates advanced analogue output capabilities into the design of the original Goldilocks with ATmega1284p AVR MCU and uSD card cage. Recently the design scope crept up to include two SPI memory devices (EEPROM, SRAM, FRAM), and microphone audio input. But, before I go through another prototype cycle, I thought it would be a good idea to build some demonstration applications, showcasing the capabilities of an arduino compatible platform with integrated analogue output and have some fun with audio..."

Goldilocks Analogue - Synthesizer GUI Closeup

Published on May 31, 2015 ThreeDRaymaker's channel

"Synthesizer application with Goldilocks Analogue and the FTDI EVE Gameduino 2 Shield."

Demonstrating a formidable Formant synthesizer


Published on Jun 20, 2015 Daniel Fischer

"(the famous 'monster synth' by Siegfried BrĂĽckner; https://www.youtube.com/channel/UCwCG...) [some videos below] at the first 'Schwingungen am Wasserfall' festival in Schladern, Germany, on 20 June 2015 - see https://www.facebook.com/media/set/?s... for pictures and https://diary4dan.wordpress.com/2015/... for context!"



Siegfried BrĂĽckner

Playlist:
Formant Inspirationen Happy Knobbing 2013
Happy Knobbing 2012 Modular Synthesizer Meeting, Fischbach, Germany - Music_ Moogulator
Formant Meeting Live Performance 2012 c
Monster Formant Modular
Mega Formant Modular Synthesizer 360p

Rainy Day - Synth Jam


Published on Jun 21, 2015 Old Beats

"Gear:
Moog Voyager - Fx
DSI Evolver - Synth Seq.
Novation Bass Station 2 - Seq.
DSI Prophet 08 - Pad
Moog Little Phatty - Lead
Roland Alpha Juno 2 - Timps
Akai VX 90 - Synth
Yamaha TX 81Z - Synth
Roland P 330 - Vibraphone Seq.
Roland TB 3 - Bass
Novation Drum Station V2 - 909 Kit
Jomox AirBase 99 - Drum
FX:
Boss CE 20 on Prophet 08
EHX Small Stone on Prophet 08
Lexicon MX 300
Tc Electronic Falshback
TC Electronic M 350
TC Electronic Hall of Fame
Allen & Heath Zed 428 mixer
Sequenced and Synced with Cubase midi only"

June Solstice 2015 Live Streaming Improv & the Bit Beast Synthesizer


Published on Jun 21, 2015 Jacob Watters

"This is a live improv that I did for the June Solstice 2015 event on radio.electro-music.com. I didn't have anything set up at my new place, so I put some synths on top of boxes and sat on a cushion on the floor. I was supposed to end after 30 minutes, but the next performer wasn't ready to go. So there is an extra bit of droning at the end."

Roland Airas, Novation BassStation II & DIY kit.

Update: via Jacob Watters on the DIY kit: "That is something I made myself and was playing on have manufactured, but I never ended up getting it done. It is basically a large MIDI controlled Lunetta CMOS synth (like an Atari Punk Console). I used it for the drone sound in this video. You can watch a better demo here:"

Bit Beast Synthesizer

Published on Feb 2, 2013

"The Bit Beast is not currently in production. The Bit Beast uses the same chip as an Arduino to generate notes that are then chopped up and filtered by CMOS circuitry. The sound then passes through two analog voltage controlled filters. Both filters are unique designs that offer very different sounds. Filter 1 is a 12db state variable filter with low-pass and band-pass modes and overdrive control. Filter 2 is a 6db filter with low-pass and high-pass modes and a squelchy distorted resonance. The filters can be configured in parallel or two different serial configurations. Both filters have their own LFO and envelope generator."

Live modular techno : enter the darkness


Published on Jun 21, 2015 Maxime F

"some dark and violent techno !
oscillators : acidlab m303 / cyclonix shpeshifter
drums : mutable peaks / tiptop bd & hh 909 basimilus iteritas, dinky's taiko"

Bastl Microgranny & Pioneer RMX 500


Published on Jun 21, 2015 djhombre

"Just a little play to see how easy it is to sync the two. No Midi, just tap tempo on the RMX500, so it is not 100%.

The MG is my fave piece of kit so far, simple yet fun to tweak."

demo - Roland sh101 - Korg Electribe -Polyvoks clone


Published on Jun 21, 2015 Alexey Taber

"Roland sh101 - Korg Electribe - and my Polyvoks clone"

JMTSYNTH UNVO-1


Published on Jun 21, 2015 panote09

JMTSYNTH product http://jmtsynth.com

EMS Synthi A with mods


Published on Jun 20, 2015 SYNTH GURU

"some tweakings with EMS SYNTHI A MKI I with mods

maybe some digital audio distorsion are audible..sorry for that..watch for your speakers!"

microKorg moogLPsound0621


Published on Jun 20, 2015 ryouichi harada
PREVIOUS PAGE NEXT PAGE HOME


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH