Featured Listings (more)


Wednesday, November 16, 2016

0-Coast v1.5 Update


Published on Nov 16, 2016 MAKEN0ISE

"New 0-Coast firmware revision 1.5.4 now available, download it here:

http://www.makenoisemusic.com/content...

Changes in version 1.5.4

1. Aftertouch set to OFF.
2. Improved Arp timing, start and stop.
3. MIDI Glide/ PORTAMENTO has been implemented.
CC 65 - 0-off 1-127 on
CC 5 - 0-127 time for portamento is in 64ths of the main clock, so a setting of halfway makes the 0-COAST take a whole clock pulse to arrive. If the clock or CC5 changes during portamento it adjusts, so you can automate if you want.
Zero is same as OFF for either CC 5 or CC 65.

4. Programming of the 0-COAST PGM Pages using MIDI CC messages. Please note we have created a Max 4 Live Object called “Make Noise 0-Coast Page Programmer.amxd” which makes programming the 0-COAST from Ableton via MIDI very simple. If you use Max 4 Live have a look at it please.

CC# for Programming the PGM Pages of 0-COAST

ArpON/OFF=117 0-OFF, 1 to 127-ON

ArpType=119 0-Traditional, 1 to 127-Latch & Shift.

LegatoControl=118 0 -OFF, 1 to 127-ON

MIDICh1=102 value of 0-15 sets a channel, 16-127 is MIDI CH. ALL
MIDICh2=103 value of 0-15 sets a channel, 16-127 is MIDI CH. ALL

MIDI CH. A CV=104 sets what comes out of the channel’s CV output. 0-Note, 1-velocity, 2-mod, 3 to 127 LFO (rate set by CLocK OUT)

MIDI CH. B CV=105 sets what comes out of the channel’s CV output. 0-Note, 1-velocity, 2-mod, 3 to 127 LFO (rate set by Tapping PGM_A)

MIDI CH. A Gate=106 sets what comes out of the channel’s Gate output 0-Note ON, 1-Velocity 50+%, 2-ModWh. 50+%, 3 to 127 LFO
MIDI CH. B Gate=107 sets what comes out of the channel’s Gate output 0-Note ON, 1-Velocity 50+%, 2-ModWh. 50+%, 3 to 127 LFO

PitchBendScale CH. A=108 amount of bend in semitones, centered on active pitch (so 1/2up 1/2 down)
PitchBendScale CH. B=109 amount of bend in semitones, centered on active pitch (so 1/2up 1/2 down)

AfterScale CH. A=110 aftertouch in semitones
AfterScale CH. B=111 aftertouch in semitones

VelScale CH. A=112 minimum velocity value
VelScale CH. B=113 minimum velocity value

MIDIClk=114 0-OFF, 1- ON

TEMPO IN Div.=116 0 to 127 - divisions of the TEMPO IN as reflected at the CLOCK OUT. 0, 1- 1/1 2- 1/2, 3- 1/3, 4- 1/4 and so on. Does not affect tap tempo or MIDI Clock."

No comments:

Post a Comment