MATRIXSYNTH: Sunday, December 4, 2016


Sunday, December 04, 2016

Rheyne - Sequenced Jam #8


Published on Dec 4, 2016 Rheyne

"Triggering Moog Mother-32 and Make Noise 0-Coast synthesizers with the Mother-32 sequencers. Effects are from a Strymon BigSky, TC Hall of Fame, and Roland Demora. Audio is straight from the mixer."

ROLAND TB-303

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CV Controlled Avid Eleven by Ninstrument



Not technically a synth, but rather a guitar modeling effects unit, this Avid Eleven has been modified for CV control by Ninstrument. A demo video should be coming soon.

Gorgeous custom front panel!

"Digging deeper into CV control for Guitarists, and I am not finding too much. So I decided on a custom CV controlled Avid Eleven would make a great Christmas gift this year. CV input with added attenuator for each of the six parameter knobs. If you know much about the Eleven, you know the front six knobs allow you to change the onscreen parameters. Now you can control them with voltages from your modular synth. I also added a CV input for the tap tempo control, so you can control the tempo with a voltage clock. This also means you could setup six pedals and control all six knobs with pedals too, if you wanted!"

Rheyne - Sequenced Jam #7


Published on Dec 4, 2016 Rheyne

"Triggering Moog Mother-32 and Make Noise 0-Coast synths with the Mother-32 sequencers. All effects are from a Strymon BigSky, TC Hall of Fame, and Roland Demora. Audio was recorded straight from the mixer."

New Minimoog Model D Sound Demos by Fanwander



"These sound examples were created for a test I wrote for the german the site amazona.de. The full article is available at www.amazona.de/test-moog-minimoog-reissue-model-d/ [Googlish here]

All recordings are created live without overdubs or editing. The Drummachine is a Roland TR-8, the echo is a Lexicon MX-200, for some tracks I used a Roland CSQ-600, Track # 8 uses a Doepfer MAQ 16/3"

Modal 008 2


Published on Dec 4, 2016 Dimitrios Sismanis

"First few patches made on the Modal 008. Barely scraped the surface with the sound design possibilities."

Yamaha VL1 Virtual Acoustic Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Easel with Benjolin Percussion


Published on Dec 4, 2016 Todd Barton

"Just a quick exploration of using the Buchla Music Easel's Sequential Voltage Source's CV output to the Benjolin's A section to create percussive sounds. Better audio here:"

Tiptop Audio: QuantiZer


Tiptop Audio: QuantiZer from Tiptop Audio on Vimeo.


http://tiptopaudio.com/new/quantizer/

Music by ANGLE & JOAO CESER

Actress: Denise Luzzi

QuantiZer is a creative melody composing module that uses cutting edge analog electronics and DSP to tune analog VCOs precisely into Western musical scales.

The front panel is packed with functions that makes it very playable and intuitive to use, with a layout that moves forward from the typical quantizer design.

At its center is a slider that can be set to play notes, add Portamento to an incoming sequence, transpose a sequence with in an octave range or transpose a sequence with in 5 octave range.

The 12 note keyboard can be set to play notes manually, add and subtract notes from scales, transpose a sequence as well as setup a variety of settings that define the quantizer behavior and sync with other modules.

Major and Minor keys are both built in to let you switch scales in a very playable way, making it pretty easy to explore musical progression. There are also 24 user scales ready to be filled up with your own custom scales.

A built in sketch pad records and plays back keys entered manually on the keyboard and slider in sync with external clock and reset signal, or Tiptop’s SyncBus which chains the QuantiZer recording function to the Circadian Rhythms time line for precise recording and playback.

Scale CV in can be set to switch between changing scales or transposing pitches using CV from sequencers.

Quantization can be set for free run or Trigger mode for even more interesting ways to interact with external sequencers.

Quantizer sets a new performance standard for Eurorack that offers incredibly stable CV quantization minimizing glitches on input, utilizes high precision temperature compensated 1V/Oct CV generation on output and features stunning conversion latency of less than half a millisecond.

QuantiZer can be set to process a wide variety of CV voltage input ranges, +/-5V CV from LFOs, bi-polar envelopes and such, or 0-10V / 0-5V standard CV from sequencers.

Continuing the tradition of advanced Tiptop digital modules, the QuantiZer Firmware running the digital brain is upgradeable via a USB thumb drive interface at its back allowing for continuous improvement and fine tuning of function and stability over time.

For additional information please download the User Guide

Size: 10HP – Depth: 43mm
Power: +12V 60ma / -12V 5ma

Ambient guitar and synthesizer jam - Telecaster and Sub Phatty


Published on Dec 4, 2016 Stephen Hummel

"Volume 1 of the 'Circuits and Strings' series of studio jam videos from subtractiveLAD aka: Stephen Hummel.

This video features a looped electric guitar improvisation accompanied by an overdubbed analogue synthesizer performance.

Guitar: Fender Telecaster Thinline Deluxe P90

Effects Chain:

Keeley 4 Knob Compressor
Ibanez TS9DX Tube Screamer Overdrive
Ernie Ball VP Jr. Volume Pedal
TC Electronic Ditto Looper
Strymon TimeLine Delay
Walrus Audio Descent Reverb with expression pedal

Amp: Fender Hot Rod Deluxe - mic'd with Shure SM57

Synthesizer: Moog Sub Phatty into Line 6 Verbzilla Reverb

Recorded and mixed in Reaper"

Disco on a Prophet 6, Yamaha DX7, Telecaster and MPC1000- Luke Neptune


Published on Dec 4, 2016 Luke Neptune

DSI Prophet-6 handling bass in this one.

"This is just a short clip. The full track will be released next year!"

SOUNDCLOUD https://soundcloud.com/luke-neptune

GALCID live at Boiler room


GALCID live at Boiler room from detroit underground on Vimeo.

ARP Explorer I 1970's Black & Wood Laminate

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Cosmetic condition: MINT. This is like your grandma's 1964 impala that she only pulled out on weekends to cruise.

Working condition: Works amazingly well for the age, but would benefit from servicing. Some of the caps on the draw bars are lightly dirty. Keys are not level; at the worst, they're about 3/16" off from each other (see photos). The keys, from octave to octave, are slightly off from each other."

Roland TB-303 with Original Box

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Korg Z1 EX MULTI OSCILLATOR SYNTHESIZER MOSS SN 001645

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Sequential Circuits Prophet 5 3.2 W/Midi

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"The condition is excellent for the age. There are some minor scuffs around the wooden edges which are typical for a synth of this age.

As far as I can tell everything is working to the best of my knowledge. That is to say all 5 voices are in tune and play accordingly. Both oscillators and all wave shapes are working on all voices. The envelopes generators fire correctly. LFO is good too.
Filters sound juicy and gorgeous. The keyboard is in excellent shape. The middle c note occasionally double triggers but this fixes itself after a few presses (the contactt likely has dust on it and needs a clean). All the buttons and pots are working correctly. The output sound is clean. Memory storage is good.

This unit had Midi installed which makes it a 3.2. The battery was replaced recently.
The internals are in excellent condition with little sign of corrosion or wear."

Roland TR-808 Vintage Analog Drum Machine w/MIDI

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Listing is for a Roland TR-808 Drum Machine with CHD MIDI retrofit! I used this solely as a MIDI triggered sound source as DIN sync does not appear to function and when syncing the internal sequencer to MIDI, it syncs fine when in "pattern write" mode but is slightly delayed when in 'manual play' mode. For these reasons, the purchaser should plan on using it as a MIDI triggered unit for getting authentic TR-808 sounds. Samples, VST instruments, clones, etc. cannot touch the sound of the real thing."

Birth Cry of a TTSH


Published on Jul 31, 2016 Little Bitchard

"Got everything electronics related of my TTSH (a Arp 2600 clone) sorted out today: Time for a quick birth cry jam :)

Patch recipe: MC-202 audio routed to envelope follower & then to vcf cutoff, sequence controlling osc 1. Osc 2 for bass, osc 3 for arpeggiated chord (pitch control by internal clock) and white noise for hihat. Vcf resonance for kick drum. Gate from MC-202 triggering vca.

Recorded with the internal mic of the camera (Olympus EPL1), proper amounts of room reverb and noise from outdoors. Some post-process limiting & eq applied."

Arp 1601 sequencer clone as oscillator


Published on Oct 23, 2016 Little Bitchard

"Test-driving my Arp 1601 sequencer clone as a oscillator. Square wave output of Osc1 on my TTSH serving as the clock source. 1601 CV out A hooked up to TTSH mixer input.

Thanks to Lumeet for suggesting this idea how to (mis-)use the 1601! :)

Check the build details of my TTSH here: https://amazingdiy.wordpress.com/proj..."

TTSH & 1601 sunday jam


Published on Dec 4, 2016 Little Bitchard

"A little analog synth jam using my TTSH & 1601 sequencer. Osc 1 pitch is controlled from MIDI keyboard, while Oscs 2 & 3 are sequenced with 1601 running in 2x8 mode. No extra VCA for Osc1 so I'm just fading it in by hand here and there :)"

TTSH Four-To-The-Floor

Published on Oct 9, 2016

"Plain 'TTSH only' patch, demoing the tweakable params. I'm using the internal clock to drive everything..

Sorry for the low volume, just shot this on the fly with my mobile with no post-processing :)"

Easterly day 01


Published on Dec 4, 2016 snipz

"First track for an age. It's been patched up for weeks, no months, and had various re-patches but I could hold out no more. The Qu-Bit Chord going through the Strymon in orchestre mode...lush"

Video 226


Published on Dec 4, 2016 paul tas

ciate-lonbarde Plumbutter & Error Instruments Sonic Lullaby.

goodmorningtechno Movie🕴👾🖖🏻Thingamagoop 3000


Published on Nov 15, 2016 TAKASHI WAKABAYASHI

"#Thingamagoop #techno #edm #electoro #テクノ #エレクトロ"

GOOD morning TECHNO futureretro

Published on Nov 15, 2016

"#techno #akai #rhythmwolf #synthesizer #futureretro #roland #sh32 #minimalmusic #EDM #テクノ #シンセ #sq1 #korg"

thingamagoop3000

Published on Jun 26, 2016

ピカチュー

darktime


Published on Dec 3, 2016 TAKASHI WAKABAYASHI

🎛goodmorningtechno
DRAKTIME 🎛
#edm #noiz #techno #minimal #electro #minimalmusic #synthesizer #doepfer #darktime
SHOW MORE

8BIT synthesizer


Published on Dec 3, 2016 TAKASHI WAKABAYASHI

🎛goodmorningtechno
DRAKTIME 🎛
#edm #noiz #techno #minimal #electro #minimalmusic #synthesizer #doepfer #darktime

Soulsby Synthesizers Atmegatron

Different DX7 models


Published on Nov 18, 2016 Hedge 777

"Talking about different models of the DX7. MKI and MKII specifically. Ain't talking about TX stuff and other DX synths. That's for another video. Have a gander!"

Dexed synthesizer doing that "Walk Of Life" DX1 organ sound


Published on Dec 3, 2016 Hedge 777

"Another one of my favourites! 'Walk Of Life' DX1 organ. Just going over Guy Fletcher's riffs.
P.S. Meant to say *perfect 4th* :D"

Tangerine dream-Logos live "dominion" 2016


Published on Dec 4, 2016 graal7

"my personnal version of logos live dominion.
ROLAND JUNO 6
MOOG SU37
CLAVIA NORDWAVE
KORG ELECTRIBE 2"

Session AEM Four


Published on Dec 4, 2016 Alba Ecstasy

"Using the Roland JD-Xi, Novation Circuit, Virus Ti2, Roland System-1 and my Eurorack: Braids, Quadnic, Z3000 mkII - oscillators, Ripples and Doepfer SEM - filters, Tides and Disting mk3 - enevelopes, Clouds and Roland Demora - reverb and delay, Beatstep Pro - sequencer."

DIY DISTORTION SOLDERLESS FOR SYNTH GUITAR HOW TO


Published on Dec 4, 2016 LOOK MUM NO COMPUTER

"SO YOU WANT A DISTORTION FOR YOUR GUITAR/SYNTH/DRUM MACHINE/BAG PIPES whatever. this is a good place to start.
NOW! you got your cereal. remember the times you got free prizes at the bottom, well now it can be some effects. all you need are these items, which i have put together here for you :-
http://lookmumnocomputer.bigcartel.com/…/distortion-box-par…
over on the look mum no computer store.
you can definitely source them yourself! it won't be hard going in with this list into your local electronics store and coming out with those parts, they are extremely common electronic components :-
2x Jack Sockets
1x 100k Potentiometer
1x 100k Resistor
1x 100nf capacitor
1x 1n4148
1x 1uf electrolytic capacitor
1x 9V battery socket
Wire. enough to complete the project
and some electronic paint, i used Bare Conductive's awesome paint for this. not only does it make the connections it does a really good job of sticking it all together.

'New Oxygen' Korg Minipops7 & Oberheim OB XA Synthesizers


Published on Dec 4, 2016 AnalogSynthMuseum

"'New Oxygen' Korg Minipops7 & Oberheim OB XA Synthesizers

I hope Jean Michel Jarre will come back like in the early years."

iPhone KORG iWAVESTATION


Published on Dec 4, 2016 PXE02321

iTunes: KORG iWAVESTATION - KORG INC.

A quick run with the Arturia DrumBrute


Published on Dec 4, 2016 Chris White

"Just wanted to see what how the Drumbrute would do by quickly syncing it in to a project and trying a basic groove. I really like the random factor and the Step Repeat buttons to create 'fills'. I promise to do a longer film of this soon."

MFB Tanzbar vs MFB Tanzbar Lite


Published on Dec 4, 2016 3rdStoreyChemist

"Comparison of the Tanzbar and Tanzbar Lite drum machines.

No further processing used except for normalisation."

Futuresonus Parva Synth - Playing Around With


Published on Dec 4, 2016 ProckGnosis

"Just some playing around with the Futuresonus Parva Synth. Not in-depth at all. The Parva is an 8-voice, 3-ocillators-per-voice, analog synth, and "each voice contains two two-pole multi-mode filters in series, which can be combined to form various low-pass, high-pass, and bandpass filter topologies" (from the manual).

Great sounding synth, but Futuresonus is still getting a few of the wrinkles ironed out with some final firmware tweaks. Looking forward to doing a more extensive look at it this when the last bits get worked. Cheers!"

CabCurio Talk: Bastl Instruments - Kastle DIY, Synths and Synthesis


Published on Dec 4, 2016 Carl Mikael's Cabinet of Curiosities

"CabCurio talk with Václav Peloušek from Bastl Instruments. Done after I took part in their DIY, soldering workshop during Loop 2016 in berlin.

A chat about DIY, modular synths and synthesis. Check out Bastl's stuff at: http://www.bastl-instruments.com/"
PREVIOUS PAGE NEXT PAGE HOME


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH