MATRIXSYNTH: Sunday, November 12, 2017

Sunday, November 12, 2017

Mystic Circuits EYEtenuator Infomercial


Published on Nov 12, 2017 Mystic Circuits



via Mystic Circuits

"Control your synth with the power of light! Two signals coming through this 0HP module are attenuated based on the amount of light hitting their respective photo detector. Normalized jacks allow one input to be sent to each attenuator or for both attenuators to be summed together at one output."

Ultimate Percussion K2-X Tech Walkthrough and Voltage Conversion


Published on Nov 12, 2017 Synthesizer Keith

"In this video I convert the power supply on an Ultimate Percussion K2-X drum module from 240 V to 120 V."

Yamaha CS40m


via this auction

"The Classic Vintage Yamaha CS-40M is a 44 key, duophonic analog synthesizer, featuring dual oscillators (pulse, sine, saw and triangle waveforms) with dedicated (AR) envelope, noise, resonant low|high|band pass filter, dedicated (ADSR) filter and amp envelopes, LFO (saw:down|up, sine, square, S/H waveforms), ring modulation, CV/gate IO, tape interface..."

Vintage Oberheim OBX Synthesizer Keyboard


via this auction

Hawkeye - Patch of Light (live MBLoopa & Synths)


Published on Nov 12, 2017 Maelstroem3

"A little techdemo/song of what is possible with the MBLoopA v2, a MIDI sequencer, that will be hopefully openly available as a DIY project in spring 2018! :-)

Features: 6 polynote channels with stepbased or unquantized note data, eight "scenes" (here used for transposing) and note editing, visual/graphical clip/note display and measure-synchronized muting/unmuting of tracks and scene switching, all running on a tiny 192kb ram microcontroller and a rather nice 256x64px OLED using the great MIDIbox hardware platform!

Synths and gear used:
* Alesis Andromeda for the intro lead
* Moog LP/MFB Dominion hard left/right mapped for the bassline
* Roland JD 990 for delay lead
* Yamaha FS1R for the kickdrum
* E-MU E6400 Ultra for drums
* Strymon Timeline/BigSky and a DIY Polivoks VCF for the phasing effect

Everything was recorded live to a Tascam wavegrabber, no DAW or other sequencer was abused during recording, only used a "real" computer for audio compression after the session :-).

Hope you enjoyed and thanks for watching and listening!
Many greets,
Hawkeye/Maelstroem Records"

MIKE303 'VocoderMan' (Vp330 Prophet 5 Matrix 6 Dmx Msq 700)


Published on Nov 12, 2017 AnalogSynthMuseum

Oberheim Matrix 6 : lead & strings
Sequential Circuits Prophet 5 : bass & fx
Sequencer : Roland MSQ-700
Drum machine : Oberheim DMX
Vocoder : Vocoder Plus VP330 MKII
Electro harmonix Small Stone Phazer

Recorded live no over dub, no blue light , no synth plugins !!!!

Trummor 2: Not a typical drum machine for VCV


Published on Nov 12, 2017 Leonardo Laguna Ruiz

"Trummor 2 can produce very crazy sounds with triggered with a VCO. You can read more about the modules here: https://modlfo.github.io/VultModules/"

Rheyne - Sequenced Jam #60


Published on Nov 12, 2017 Rheyne

"Percussion is from a Moog DFAM and Noise Engineering LIP. The pad and bass is from a Moog Mother-32 (x3). Some Fender Rhodes chords are coming from a Make Noise Morphagene."

Synthmata - Free Online Patch Editor for Volca FM and DX-7


Published on Nov 12, 2017 Oscillator Sink

"I've built a free online Volca-FM and DX-7 patch editor that runs entirely within the browser (Chrome or Opera currently supported).

https://synthmata.com/volca-fm/

It gives you full control over all of the parameters and makes it tremendously easy to share and save your patches.

If you're a synth maker or a web developer who'd like to work with me to bring support to more synths, hit me up on oscillatorsink(at symbol)gmail.com"

GRP A4 special FX


Published on Nov 12, 2017 coyotesynth

"This short demo demonstrates the GRP A4 in a Special FX sound design exercice. The Filter is modulated by the LFO 1, in audio range, creating interesting FM filter effect. Only filter is listened, no oscillator is heard."

Oberheim Matrix 1000 sound demo


Published on Nov 12, 2017 MIDERA

"Just messing around with the few minutes I have while my infant is asleep (so don't expect too much here!). Made this patch using Patch Base. I had been comparing the Oberheim Matrix 1000 to the Akai AX80 and... well, the Oberheim is just far superior in every way but looks.

Eventide Space and Source Audio Delay for FX"

DSI REV2 Shot Glass


via @dsiSequential

"Thanks to everyone for stopping by DSI & @musicexposf 2017!
Photo: @animusicsf | #ProphetRev2"



So cool.

48MINS OF LIVE AMBIENT DRONE - 4K with the Make Noise Shared System


Published on Nov 12, 2017 Luke Sanger

"Live eurorack ambient drone set.
Recorded live in one take, with no edits, overdubs or multitracks - direct from the Make Noise Shared System.
Video is recorded in 'real time' and documents a trip to the beach I take regularly with my son."

Exploring FM-Xperience for Yamaha Montage


Published on Nov 12, 2017 APP SOUND

"FM-Xperience is a sound expansion for the Yamaha Montage synthesizer. It gives you a great access to different popular FM voices for todays music production and live production. As a member of the voicing team I delievered some ideas for more conventional fm sounds.

In this video you will notice that it's rather simple to make some nice musically variations by using the Super Knob an other controllers.

Please visit http://easysounds.eshop.t-online.de/ for more infos."

First Run With Elektron Octatrack MKII, Analog Four MKII, Novation Peak, Roland TB-03


Published on Nov 12, 2017 Ehsan Gelsi

---

Interesting how much bigger the Analog Four is compared to the Octarack.

Moogle


Published on Nov 12, 2017 zack dagoba

"A doodle on the Moog. Here you can see me tweaking some drum sounds made on the 3C Moog. The snare drum is the most complex sound, using 4 VCOs, noise and 2 envelope generators / VCA combos. The bass drum is a simple 1 VCO going through the 904 filter with another env gen controlling the pitch and the VCF frequency. The HH click sound is just the clock going through the fixed filter bank. I'm using the 2 sequencers to trigger the envelopes, and the matrix mixer to mix and EQ it all."

vpme.de - trig31 Eurorack Trigger to MIDI converter


Published on Nov 11, 2017 Vladimir Pantelic


via vpme.de

"Available NOW: trig31 – an 8-channel trigger to MIDI converter in 4hp

let's you hook up all your (old) MIDI drum machines and drive them from triggers created in your rack.

fully programmable channel, note and velocity per trigger."

DSP Synthesizers: MIDIfying the Korg Monotron


via DSP Synthesizers

"This project adds USB-MIDI control to the Korg Monotron synthesizer.

A Trinket is installed inside with a micro-USB connector at the back.

A custom version of the uMIDI2CV is flashed on the Trinket.

The original function of the Monotron is unaffected when no USB is plugged in.

With USB plugged in the Monotron shows up as a MIDI device on the computer/phone/tablet without any special drivers.

The Trinket is connected to the AUX input and to the filter cutoff.

DreamsOfWires - AJH Synth Mini Mod solo improvisation


Published on Nov 12, 2017 DreamsOfWires

"Back home after a busy month away, and back to my favourite toys.

This is only something very simple and free-form, with a single voice, just to enjoy the sound of the instrument. My recording doesn't do the Mini Mod justice, but it has a satisfyingly big, warm and characterful sound.

I start with a single VCO, then add a second, then a third, all tuned to different pitches. The 'mod' touch pad on the Keystep (plus my finger) is controlling filter cutoff via CV, and I'm tweaking resonance directly on the filter front panel.

Recorded into AUM on an iPad, via an iConnectAUDIO4+, using Audio Damage's 'Eos 2' for reverb. A Frequency Central LFO is connected to the VCO's PWM.

Cloud footage was recorded on an iPhone SE, synth footage was recorded with a Sony RX100 IV and a LUMIX GX7.

Please don't ask for more technical details than that, it's really not that important and gets tedious. All that matters is the results and the enjoyment getting there..

To my subscribers/followers so far - thank you for your support and patience, it genuinely means a lot to me.
https://tomorrowthecure.bandcamp.com"

Behringer DeepMind 6 Polyphonic Analog Dreams 2017 Synthesizer Rik Marston


Published on Nov 12, 2017 SynthgodXXX

"Behringer DeepMind 6 'Polyphonic Analog Dreams' 2017
Synthesizer demo by Rik Marston **100% No Talking!!!!**
**Watch in HD!** **Turn it UP!**

Here is the Behringer DeepMind 6 demonstrating
some preset Pads & ARPs. This synth is just great
and I am having a BLAST with it, it's so fun to use!!!!!
I think it is way worth the bang-for-the-buck! :)
If you have a chance check a DeepMind 6 out!!
Recorded DRY into Ableton LIVE
Thank you for watching!!!!
Please Like, Share & SUBSCRIBE!!!
More Synthesizer Demos
Ambient Chill Zen Music
Electronic Dance Music
COMING SOON!!
Rik
11/11/2017
If you need some ANALOG Synth .WAVs for your next track:

For the KORG KRONOS
For ANY Device that uses .WAVs"

ROLAND JU-06 Boutique


via this auction

Kawai K1 Synthesizer Keyboard Refurbished SN 184788


via this auction

"This K1 has been gone over just this past week.
It has a new battery inserted into a properly installed battery holder for easier future replacement.
The mod stick was serviced for a few cold solder joints, so now it functions fully as data entry and real-time performance mod tool.
Everything was vacuumed out and cleaned. Some surface scratches were buffed out.

Factory patches were re-installed and a few patches were edited to test everything out and to demonstrate what this platform is capable of. Layered performance of a decent string patch with slight de-tunings + panning plus use of the mod stick makes for some rich, swirling textures that are atmospheric gems. Being able to use amplitude mod, along with the omnibus waveforms enables some very interesting rhythmic tools.

It has a few scratches here and there, and the area near the patch select and edit buttons has been polished a bit by years of use. Overall, clean, straight, solid.

It comes with a new 12v power supply."

Akai Professional AX-60 Analog Programmable Polyphonic Synthesizer MIDI


via this auction

"It is a great CEM3394-based fully analog, 6 voice (VCO) synth comparable to the Roland Juno-106, but with some features of the Jupiter-6, for example split upper/lower voices and a nice Arpeggiator. The filter is fantastic, much different than a Juno, and can really squeal. It also has a great Chorus effect similar to the Juno. It can also interface with the Akai S-612 sampler. One of the last analogs from the 80s."

Novation K-Station 25-Key Synthesizer


via this auction

"2-octave, touch-sensitive keyboard with pitch and mod wheels. Eight-voice polyphony with twelve-band vocoder and arpeggiator. 25 knobs and 4 sliders for instant, hands-on control of oscillators, filters, envelopes, and LFOs. Audio input lets you process external signals, making it an effects box of staggering potential with studio-quality reverb, chorus, delay, synced panning, and distortion. 200 presets plus 200 preset slots, all rewritable.

FEATURES
25-note touch-sensitive keyboard
Pitch and mod wheels
Eight-voice polyphony
Twelve-band vocoder and arpeggiator
25 knobs and four sliders
Audio input for external signal processing
Studio-quality effects
400 rewritable memory slots, 200 of which are presets"

ROLAND JUNO-106 MIDI Analog Synthesizer


via this auction

Roland Juno 106


via this auction

"Bite the Bullet" Roland JX-8P Synthesizer and PG-800 Programmer


via this auction

"Uniqe collectors vintage Roland JX-8P originally owned by the 80s Rock Band "Bite the Bullet".
The synth comes with the memory card containing the sounds created by the band using the PG-800 prorammer, which is included in the sale and featured in their first album released in 1989.
The PG-800 is an essential editing tool for the JX-8P and can also be used during live performance.
A copy of the CD "Bite the Bullet" is also included in the sale."

Roland JP-8000 Keyboard Synthesizer


via this auction

Jamming with Digitakt, TR-808, SH-101 and Jun0 106


Published on Nov 12, 2017

"Jamming with Digitakt, TR-808, SH-101, MC202 and Jun0 106. Samples in the digitakt were recorded from the MS10 and MS20."

Roland SE02 & MXR Flanger M117R


Published on Nov 12, 2017 3rdStoreyChemist

"Sequence on the SE02 synthesiser through the M117R.

No further processing except normalisation."

Casio VZ-1 demo - Cyber Textures


Published on Nov 12, 2017 Dual Shaman

"Performing a number custom Casio VZ-1 patches fed through Strymon Bluesky."

Acid Session featuring x0xb0x / Jomox / Korg


Published on Nov 12, 2017 alternatingbitmusic

"I've only owned the bass synth & XBase09 for two weeks but absolutely love them. Effect pedals used: Strymon DIG, Strymon Blue Sky, Boss RE20."

Dreadbox Abyss Sound Demo II (no talking)


Part 2 added to this post.

Korg MS2000B Patches 02


Part 2 added to this post.

MFB Tanzbar, Korg Monologue & EHX Memory Boy


Published on Nov 12, 2017 3rdStoreyChemist

"Jamming with the Tanzbar drum machine & a Monologue synthesiser synced together.
Monologue MIDI Out to Tanzbar MIDI In. The Memory Boy has been placed on an aux send."

Korg Pa4X Keyboard Sets Strings QR


Published on Nov 12, 2017 Qui Robinez

"On the pa4x you can combine up till three sounds to create one sound. This is done with the Keyboards Sets feature. There you can create your own combinations of sounds and set things like the keyzone range for that specific combination.

In this keyboard set i use three of my own sounds to create a string ensemble which i use to play a song solo (with style elements).

It's really easy to create such keyboard sets. Just select three of your favorite sounds and set the keyboard range, octave tuning and more per sound and add the effects to the keyboard set. Then save that as a custom keyboard set and you can use it any time you want."

vermona perfourmer mk2


Published on Nov 12, 2017 ljs8888

Sequentix P3 sequencer and Pearl Syncussion SY-1 as well.

Hardware techno #12 / PerFOURmer, Tanzmaus


Published on Nov 12, 2017 pawwakill

"Deep techno.

Vermona PerFOURmer, MFB Tanzmaus, Eventide Space."

Retro: Akai MPC Live + gear jam


Published on Nov 12, 2017 ranzee av

"Live jam with the Akai MPC Live using MIDI sequences of synthesizers (see gear list below). Multi-camera angles, one-take video, no edits - audio direct from mixer into camera...

Gear used: Akai MPC LIve, Roland D-550, SE-02, JU-06, System-8, System-1, MX-1, Korg Minilogue, Waldorf Streichfett, Strymon BigSky, EHX Smallstone, Fairlight CMI Samples - other samples include Alesis HR16A, Yamaha Reface CS and my voice!"

ARP Little Brother Demo


Published on Feb 26, 2017

Demo starts at :45.

"Short demo of my newly acquired ARP Little Brother synthesizer expander accompanying my ARP Axxe. The Little Brother arrived in pretty good working order, no repairs needed, although some minor maintenance is in order for a couple of loose switches. It sounds just wonderful. First part of the video shows the AXXE settings. Pretty basic, both oscillators running, filter wide open, short attack and fairly quick release. I programmed a short sequence on my Engine sequencer which has some staccato notes, some longer notes, a slide or two, etc. As the sequence plays I just hop through the different waveforms and octaves on the Little Brother to showcase the sounds. I think I play with the vibrato a little bit including turning on the vibrato delay for a few seconds."

Jeff Hunt DIY Synth Project - The Portal


Published on Oct 2, 2016 Jeff Hunt

"My DIY groovebox. I am a beginner. Just got started this year after watching videos by Casper Electronics. Highly recommended! I followed up by researching 9v/12v single supply circuits, and after much trial and error I came up with this final product. Many thanks to the folks on the Synth DIY forums on Facebook and elsewhere for tons of advice. Also many thanks to Nicolas Collins and his book Handmade Electronic Music for lots of tips. Feel free to ask any questions, and thanks for watching!

Square/Sawtooth/Triangle waves
16-step sequencer based on a simple 40106/4040/4067 design for the oscillator
8-step sequencer based on a 40106/4040/4051 design for drums

I did install a clock input but haven't even tried it yet. I think I may have to build an external clock adapter module to make it work right due to the way I timed everything.

Sound processing circuits based on the following designs with my modifications:

--MS20 style lowpass filter with lfo modulation by Tim Escobedo

--"Little Angel" chorus by Frequency Central

--"Funky MF" multimode envelope follower filter by Frequency Central http://www.frequencycentral.co.uk/

--"Echo Bender" delay by Casper Electronics http://casperelectronics.com/finished...

Rhythm Section comprised of variations of Andromeda Space Rockers by Eric Archer http://www.ericarcher.net/"

DIY Virtual analog synthesizer


Published on Nov 12, 2017 devoxxxide

"Nord Drumみたいなのが作りたかった"

"I wanted to make it like Nord Drum"

BURG - neon (Abstrakt instruments Avalon bassline)


Published on Nov 12, 2017 ollilaboratories

"If you like my stuff please support me on http://music.ollilab.com/ and https://www.patreon.com/theBURG

This track is also available for download on bandcamp: https://ollilaboratories.bandcamp.com...

So I got the Abstrakt instruments Avalon bassline the other day, really missing the 303 style sounds since i sold my TB-3 it is safe to say my expectations were very high on this one.

I plugged it in, and it just took me into this hypnotic trance stage almost at an instant... i have no idea what was going on, I tried adding hihats, playing melodies on the volca keys, ms-20 etc.. but nothing felt right.. this 8 step sequence just wanted to breathe. And on my does it breathe and sound great. I'm completely blown away by this machine, possibly one of the best purchases I have made since I got my ms-20.

What you see and hear is me macro controlling the avalon knobs, cutoff, envelopes, accents to make it fluid and have the bassline progress over time .. also i did not want the other sounds to take too much space since this is all about the square bassline, period.

18 minutes might be a bit over the top with a 8 step sequence in 121 bpm, but man, i could easily play this for 20 minutes more :)

This is way more minimal in style that I normally do with BURG; but it felt so right to just take all the extra icing off of this one since the Avalon just wanted the space on this track.

Digitakt does the kick, rimshot, and a couple of dubby chords and a low-end sub-bass, volca bass does another filter modulated bass on top. FM does some stabs routed through the Avalon external in.

Modular sound sources, braids and rings background melodies + BIA for percussion.

Gear used: Abstrakt instruments Avalon, Elektron digitakt, KORG volca bass, KORG volca FM, tr-8 (just for sidechain FX on the volca bass).

FX used, RE-20 + Keeley caverns on modular, EQD space spiral and built-in FX in the Elektron analog four for the avalon.

Hope you will enjoy it!

BoOoM!"

Rick and Morty opening theme cover soundtrack


Published on Nov 12, 2017 ninni spina

"Rick and Morty opening theme cover, live ."

CASIO Digital Horn DH-500 Duo / Six Oyatsu Duets


Published on Nov 12, 2017 mkirino01

"Equipment: CASIO DH-500 (Digital Horn), and Apple Logic Pro9 (multitrack audio recording with reverb effects)

Songs:Oyatsu Duets. comp. by Kazuhiro Takeda (オヤツな二重奏, 武田和大 作曲)

Sheetmusic: http://amzn.to/2i6d86r

[[ Oyatsu Duets (OD) ]]
0:00 OD#001 Da Capo (FLUTE/CLARINET)
0:47 OD#009 Bubbles and Marbles (TRUMPET/SAXOPHONE)
1:11 OD#006 Konpeito Hajiketa (OBOE/SYNTH-REED)
1:33 OD#017 Sohdai Naru Ensoku (TRUMPET/TRUMPET)
2:03 OD#034 Pachi Pachi Gum Wa Hoya Humi (TRUMPET/TRUMPET)
2:26 OD#005 Haha No Cake Wa Sakurairo (SAXOPHONE/SYNTH-REED)"

Kick.S Live / Gamo4 Live recording. (Nov..12, 2017)


Published on Nov 12, 2017 Kick.S

"/// Equipment ////
Digitakt (custom painted)

BC https://kicks1.bandcamp.com/album/--7"

Juno 60 + Strymon Big Sky Bloom + Moogerfooger phaser


Published on Nov 12, 2017 Цыхра Цыхра

"= very big lush and crystal clear sound"

『Stylophone GEN X 1』with Loop Machine Play Electronic Music


Published on Nov 12, 2017 K0MABA

"『Stylophone GEN X-1』performance by FALCON-106."

Stranger Things: Kids - Juno 60 & Modular Synthesizer


Published on Nov 11, 2017 Autotross

"Live cover of the song Kids from the Stranger Things soundtrack. The Juno 60 really feels at home on this one!"

Erica Synths DIY Bundle II Part 4 : System Overview and Patching Strategies


Published on Nov 11, 2017 Synth Diy Guy

"Part 4 of the special series on the Erica Synths Polivoks inspired DIY Bundle II. Having finished the build, we now look over the whole system and explore some of the implied patching strategies."

All parts here.
PREVIOUS PAGE NEXT PAGE Home




©2017 Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH - EVERYTHING SYNTH
privacy policy