Dtronics DT-DX sneak preview

video upload by Dtronicsmusic

"the Dtronics DT-DX
Based on the MiniDexed synthesizer."

DT 303 vs Xoxbox

video upload by Dtronicsmusic

"Basic demo of the Dtronics DT-303 Distortion for the TB-303 / RE-303 / XoXbox"

DT 303 vs Dinsync RE 303


"The Dtronics DT-303 is a distortion that fits perfect with a Roland TB-303 or clone. Giving it unique sound to your acid music.

he Dtronics DT-303 is not your ordinary distortion, It is not a clone or copy.
It gives you 3 blends that you can adjust and filter. Each of the 3 settings have minor changes in the frequency spectrum. The distortion knop allows you to spice things up from minor to overrated distortion. Use the filter knob to suppress those high frequencies. A volume knob is added to adjust the output level to your needs. A bypass knop allows you to switch back to the original sound quickly.
The DT-303 was designed to fit perfect next to your TB-303 or RE-303. With the connections at the back you will have no spaghetti wires hanging over your gear."

Dtronics Introduces DT-303 Distortion for the TB-303

Dtronics DT-303 vs Roland TB-303video upload by Dtronicsmusic

"Basic demo of the Dtronics DT-303 Distortion for the TB-303

The Dtronics DT-303 is a distortion that fits perfect with a Roland TB-303 Giving it unique sound to your acid music.

The Dtronics DT-303 is not your ordinary distortion, It is not a clone or copy.
It gives you 3 blends that you can adjust and filter. Each of the 3 settings have minor changes in the frequency spectrum. The distortion knop allows you to spice things up from minor to overrated distortion. Use the filter knob to suppress those high frequencies. A volume knob is added to adjust the output level to your needs. A bypass knop allows you to switch back to the original sound quickly.
The DT-303 was designed to fit perfect next to your TB-303 or RE-303. With the connections at the back you will have no spaghetti wires hanging over your gear."

New Dtronics DT-RDX-V2 Yamaha Reface DX Controller

via Dtronics

"The Dtronics DT-RDX-V2 is a hardware controller for the Yamaha Reface DX and the successor to its older brother the DT-RDX. The difference between the two is that the RDX-V2 has a hardware MIDI merger on board for even better performance.

With all its parameters the FM synthesiser is a challenge to control. The DT-RDX-V2 has all parameters directly accessible with its 41 knobs and 9 switches. All you have to do is select the desired operator. You can also edit multiple operators with the same parameters at the same time.

The controller is mounted on a stylish holder.(included)"

CLICK FOR MORE »

Dtronics DT-RDX controller for Yamaha Reface DX Synth

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Dtronics DT-RDX controller for the Yamaha Reface DX in mint condition with power splitter and midi cable."

CLICK FOR MORE »

ROLAND JX-8P Vintage Synthesizer Sound Shaping w/ Dtronics DT800 Controller

video upload by TrumJohann's Mancave

"Just a lot of tweaking quite randomly...
Clip from August 2022
Audio taken directly from the stereo source"

Roland D-05 Boutique Linear Synthesizer Module w/ Dtronics DT-01 Programmer & Accessories

Note: Auction links are affiliate links for which the site may be compensated.

via SYNTH CITY Reverb

Note auction links are affiliate links. See the site's privacy policy for more info.

CLICK FOR MORE »

Making a new Dtronics prototype..

video upload by Dtronicsmusic

"Today we make some new prototypes on our pick and place machine...

DTronics DT7 Programmer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Add easy programming to your DX7 family

This new product, will give you many years of joy programming your synthesizer.

Designed with the latest technology and high quality components.

The DT-7 is specially designed for the DX7 family and is tested with the following models:
DX-5
DX-7
TX-7
TX-802
TX-816"

CLICK FOR MORE »

YAMAHA Reface DX w/ Dtronics DT-RDX Controller

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Roland D-50 with Dtronics DT-01 Programmer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Enjoy the classic D50 sound now with the easy access thanks to the Dtronics hardware editor."

CLICK FOR MORE »

Dtronics DT7 – Yamaha DX7 programmer // Jellinghaus

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Dtronics DT7 – controller for Yamaha FM synths such as DX-7, DX-5, TX-7, TX-802 & TX-816.

Functions and layout are modelled after the legendary 1980s Jellinghaus controller. Please refer to the manufacturer's manual and site for any questions about what this does and which synths it will work with. The latest firmware can be downloaded there too.

This unit is as new and has been unpacked for taking the photos only. There appears to be a light scratch on the main display (or on the protective foil, if there is any). Otherwise this is 'open box' mint. Comes with a switchable PSU and a MIDI cable."

CLICK FOR MORE »

Dtronics DT7 – Yamaha DX7 programmer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Dtronics DT7 – controller for Yamaha FM synths such as DX-7, DX-5, TX-7, TX-802 & TX-816.

Functions and layout are modeled after the legendary 1980s Jellinghaus controller."

CLICK FOR MORE »

Roland JX-8P special features and some tricks

video by synthlegends

"The Roland JX-8P is still very underrated, although ist was the succssor of the Roland Jupiter-8. The JX-8P is famous for its very lush pad sounds, but it is capable of some very weird stuff, like FM-Bell tones, trance sounds and even PWM. In this video I denonstrate some of those special features, also the 6 key modes and some sound designing tricks to get more out of your JX-8P."

w/ Dtronics DT-800 editor.

DTronics DT7 Programmer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

The DT7 programmer for the DX-series synthesizers. The DTronics DT7 Programmer uses the same type of architecture used in our DT-200 and DT-300 series, but on a massive scale!

Key features:
- The DT7 runs it's own software within its own processors
- Firmware updates over MIDI
- Supporting different types DX-series
- Provides a knob for every parameter, no layers, no fuss!
- Easily adjust envelopes of the appropriate operator's Envelope generators, pitch settings, scaling...!

CLICK FOR MORE »

Dtronics DT7 Programmer for DX Series Synthesizers (DX7, TX816, DX5, TX-802, TX-7) Jellinghaus Clone

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"The programmer is functioning perfectly with no issues. Like the original Jellinghaus controller, when controlling the DX7, you have to press a key after you turn a knob to hear the changes you make. Unlike the Jellinghaus, the programmer supports later DX-Series synths, like the TX-802. With these later DX synths, changes are instantaneous. Programming is really intuitive!"

CLICK FOR MORE »

Yamaha Reface DX w/ Dtronics DT-RDX Controller

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Video in the listing previously posted here.

"The DTronics DT-RDX changes the game for the Reface DX and makes FM synthesis programable/editable via a hardware controller. You can edit each operator individually or multiple operators at once, along with universal/common settings. As amazing as FM synthesis can sound, it's always been fairly intimidating to program/edit, but the DT-RDX (which has a solid metal frame) changes that and turns the Reface DX into a serious synthesizer. Using the DT-RDX to modulate the Reface DX while its looper is engaged produces some absolutely magical sounds!"

CLICK FOR MORE »

Roland Alpha Juno 2 Synthesizer with Dtronics DT-300 Programmer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Dtronics DT-200 V3 Controller for Roland Jx3P

Published on Dec 30, 2019 acidjack303

"Dtronics presents the new DT-200 V3 a full PG200 clone.

The Dtronics DT-200 V2 is the programmer specially designed for the dual- DCO, 6 voice poly- phonic synthesizer such as the JX-3P, MKS-30 and GR-700."

The first and original DT-200 came out in 2011.

Roland Boutique Series D-05 Linear Synthesizer with D tronics DT-01 controller with Ultimate Patches

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Basically you are getting a real D-50 here. The D Tonics controller can control every parameter of a Boutique as well as the real D50. Roland is not making the D-05 anymore and the remaining new items are going for $500.00 dollars. the D Tronics is going for $350.00 and ships from Europe..."

CLICK FOR MORE »