Arturia Announces the RACKBRUTE 3U and 6U Eurorack Cases

Published on Jan 17, 2018 Arturia
Music: Stéphane Schott (http://www.lyynkstudio.com/)

"Making Eurorack modular more accessible and intuitive than ever, RackBrute can connect to the MiniBrute 2 or MiniBrute 2S to create the ultimate modular synth ecosystem. Keeping all your modules safe, powered, and within easy reach. Combining your choice of modules with the enormous synth potential of the next-gen MiniBrutes. A patent-free Link system so that other companies can join in the fun. This is MiniBrute 2. This is MiniBrute 2S. This is RackBrute. This is only the beginning."

Update: RackBrute review: Link system explained on the new Arturia Rack Brute

Published on Jan 17, 2018 loopop

Note there are no modules, just the cases. The bottom of the stands attacked to the new MiniBrute 2 and 2S.  Curious if Arturia will be producing eurorack modules over time.

The press release:

"Grenoble-based hardware and software synth specialists Arturia are proud to announce the imminent release of RackBrute, a Eurorack modular storage, power, and transport system.
Following the announcement of the new MiniBrute 2 and MiniBrute 2S synthesizers, RackBrute is the third and final product of the series, and will be available at stores worldwide from March 2018. RackBrute is a dedicated Eurorack case crafted from sturdy steel and aluminium, with many innovative enhancements. Each unit features a dedicated power module to keep your precious gear supplied with +12V / -12V / +5V power, the handle can be calibrated to act as a multi-position stand, letting you use your Eurorack modules in whatever position you find most comfortable.

RackBrute comes in two sizes: a smaller 3U, 88HP version, and a larger 6U, 176HP version. Whatever size your collection, your modules will be housed in the most economic, efficient way possible.

RackBrute completes a versatile, customizable, creative EcoSystem bridging the gap between traditional synthesizers and the world of modular thanks to the new Arturia Link system found on both the MiniBrute 2 and MiniBrute 2S to lock in place. When using RackBrute in combination with MiniBrute or MiniBrute 2S, everything is laid out before you, breaking down all barriers for your experimentation and inspiration.

When you need to pack away for storage, or to transport your whole setup for a gig, RackBrute can pack down into a handy transport mode, with a sturdy carry handle and spacers to prevent any collision between the RackBrute and the other attached hardware. A stylish RackBrute Travel Bag is also available to keep your precious cargo scratch, splash, and dust free.

If you’d like to get hands on MiniBrute 2, MiniBrute 2S and RackBrute, find Arturia at NAMM 2018. We’ll be at booth #11910. We can’t wait to see you."

Fredric Effects Releases BugBrand BugCrusher Stomp Box

via BugBrand:

"It has been a while since I made BugCrushers, but I'd still get emails asking for the old Micro version. These would always poke my brain and get me wondering - I knew I couldn't head back to pedal designs due to production methods, so instead I looked around for someone take it on themselves and that's where Tim of Fredric came in. I provided him a slightly updated design of the Micro/WorkshopCrusher and he's now brought it into production - so do please support him and buy direct!

Will I ever do another BIG BugCrusher version? I don't know for sure - I did try a couple of design attempts this year, but nothing quite stuck. It would be a good thing to have in the Red lineup though."

via Fredric Effects

"The BugCrusher is an Analogue Sample Rate Reducer - a Sample & Hold circuit run at audio rates - which produces aliasing effects on your signal.

With the Rate set high this imparts a clear fizzle & crunch, while at low rates any high frequencies will seem to wrap-around in an effect somewhat akin to a clean ring-mod.

Despite the name, the BugCrusher is not an actual BitCrusher - most BitCrusher effects will have Sample Rate (x-axis quantization) and Bit Depth (y-axis quantization) and are typically digital in nature.

Tom Bugs, the creator, says 'Back when I was making BugCrushers, they were well liked for processing synths & drum machines, but the effect also has found favour with bassists as the low frequencies can pass through cleanly while the highs are crunched'."

Synthesizers.com Introduces the TB22++ Thought Box 22-Space Synthesizer System

via synthesizers.com

"The Thought Box TB22++ is a 22-space synthesizer with 3 oscillators, a Q960 Moog-style sequencer, and an incredible array of modules in a rugged, fold-able cabinet. The folding cabinet is built like a tank and includes cable storage and a fold-out cable holder. TB22++ includes a power supply and a generous complement of color-coded, low-profile patch cables. Yes, you can close the system without removing your patch."

Note the built-in case handle.

"TB22++'s folding enclosure offers a brushed-aluminium handle. Turn the sleeves on the ends of the handle to unlatch and unfold the system in one easy step.

At the bottom of the enclosure is a channel holding the power supply along with storage for the patch cables. The channel's cover unfolds into a cable holder.

Module functions include: MIDI converter, arpeggiator, slew-limiter/portamento, three oscillators each with EG and VCA, gate math, sample & hold, noise with low-pass filter, sine/square LFO, dual envelope generator, state variable filter with VC resonance, 4-channel mixer with signal processing, VCA with panning, tuner and headphone amplifier, 8x16 step sequencer with trigger I/O, sequential switch, 3-channel quantizer.

Use TB22++ with any MIDI source such as a MIDI keyboard or a computer, or play it with the controls.

The two Box11 cabinets provide 4 groups of multiples and the Q175A module provides multiples for pitch and gate.

Folding enclosure with rugged hardware and a built-in power system. Goes anywhere.

Low-profile, color-coded patch cables included. See more about these.

The TB22++ is a Moog-Unit (MU) format synthesizer using 1/4" patch cables (included)."

CLICK FOR MORE »

Introducing the Blacet RAK-3 - 6" Deep Frac Rack Case

Assembling the Blacet RAK-3 Published on Nov 17, 2017 jblacetIII

via http://blacet.com/

"Introducing RAK-3: Narrower, lighter, sturdier. Same great electronics as RAK-2.

Our new 6" deep case holds most of our newer modules in the bottom (or top) section. Our longer and legacy modules fit in the top.

The six piece chassis design is more rugged and easier to ship.

The power supply and distribution board are completely assembled and tested.

PEM nuts make the rest of the chassis easy to assemble using 18 screws; no nuts needed!

World wide compatible +/-15V 800 mA/800 mA power suppply.

Your choice of rack ears (pictured) or right angle handles."

Folktek Resonant Garden

Published on Oct 29, 2017 Sir Folktek

"The Folktek Resonant Garden is an acoustic-electronic hybrid instrument. See/read more on Folktek.com
In these first videos, the cv functions are never used and there is no external processing. Videos to come will cover the use of cv as well."

via Folktek

"The Resonant Garden is an acoustic-electronic hybrid designed to create anything from beats and oddities to dense sound scapes. From its inception in 2006, the original garden has gone through many changes and refinements; micro garden, luminist garden and illuminist garden and finally this latest and likely final version.

The garden essentially utilizes three Alter circuits but each equipped with a mic pre-amp, and 4 garden (stringed) panels for generating acoustics. By plucking, rubbing, tapping or even bowing, those micro-acoustic sounds become amplified and effected by the Alter in any number of ways. In essence, the garden is a large microphone designed to pick up vibrations."

EFFECTS
There are two Alter 1 designs and 1 Alter 2. Each Alter 1 has seven different DSP effects which is selected by touching the copper hexagon:

1; long delay (capable of near infinite feedback looping)

2; tight, notated granular delay

3; huge plate reverb

4; shimmering reverb

5; distortion and multi-filter

6; pitch delay

7; stutter glitch

Alter 2 has the following effects:

1; analog delay

2; reverb with infinite capture and lp + hp filters

3; choral reverb

4; palindrome reverse delay - backward/forward repeat

5; time stretch

6; pitch shift (notated semi-tones

7; time stretch glitch

CONTROL
On each of the Alter sections, the following is present:

- control for the gain of the mic pre-amp or any incoming audio.

- controls for mix, X, Y and filter as well as clock.

- all effects have a variation of a filter which may change effect to effect.

- X and Y control various rates.

- clock control adjusts the rate which controls the DSP which can drastically change the effect. In doing so it does slightly lower the quality of the output signal but the results are fantastic. This clock is not for synchronization.

- mix, X, Y and filter all have CV control inputs.

- Each control level or cv input is visualized on the control panel.

ACOUSTICS
Each garden panel is equipped with a contact mic. A contact mic is designed to pick up vibration. The mic pre-amp is specifically designed to deal with the frequencies of the contact mic by boosting certain frequencies and dulling others in order to optimize the sound quality. The mic pre-amp has a gain control so the level can be adjusted according to how you intend to play.

CLICK FOR MORE »

NONO Modular Introduces Space Case Series - Foldable Eurorack Cases

via the Kickstarter:

"Compact, foldable eurorack cases, which give the most while taking up little space, functional solutions for your modular systems.

Nono is a product line for eurorack modules, aimed at finding functional solutionsfor your systems, where the human-machine relationship is the focal point of the design, to improve playability, instrument focus and transportability. The products have a design that includes the charm of old lab machines, cast into the future, and the beauty of an object designed to be both useful and efficient. Space age e rationalism in modular Eurorack format. 

++ FROM JUNE 5 AT SPECIAL PRICE ON KICKSTARTER ++

SPACE CASE SERIES
These eurorack cases are designed to meet the needs of musicians who travel a lot and therefore need compact, foldable cases, which give the most while taking up little space. Efficient companions for your setup. Built and assembled with great care, with prime quality material, by expert craftsmen directly in Brianza,manufacturing centre of the best Italian design.

The series is composed of 3 case, 3 format for 3 space experience.

ROVER 1.60
A single 60hp row
Small format to gather ideas and a savoured module selection, For a mini modular setup.2 piezo pads mounted on the lid for rapid tricks.
A small device for agile moon landings

ORBITER 2.84
2x 84hp rows
Classic format, for vertical or horizontal use, robust and foldable while patched!
Ideal if you’re looking for an easy to carry, durable, high-quality case.

LANDER 3.84
3x 84hp RAW and a padded space for storing cables, power bricks, spring tanks and accessories.
Robust and foldable while patched.
Inspired by the design of old, glorious synths,
Lander has an original and innovative design.
The idea comes from the sum of a 1ROW skiff plus a vertical 2ROW case,
The vertical case is tilted for optimal focus on the modules,
The whole case can be folded for transport.
Compact and light
Folded size: 47x29x20 cm
Weight:. 5 kg
Plus, padded Storage space: 14x43, H from 4 to 7 cm"

CLICK FOR MORE »

New EMW Eurorack Demo Cabinet

via EMW:

"This is our new Eurorack cabinet. We’ll be using this 1008 HP unit in all our future demonstrational videos and sound examples.

EMW is reaching this month the mark of 120 Eurorack modules models, so there’s a lot more to come from our time travel capable installations. : )"

Superbooth 2017 - Befaco Hexmixer Hexpander & Cases

Published on Apr 24, 2017 DivKidVideo

"Here's another video for Befaco from Superbooth. This time looking at the Hexmixer, Hexpander and new cases and power."

Jumpskiff Teaser - Eurorack Skiff by Befaco

Published on Mar 31, 2017 Befacosynth

"The Jumpskiff is a lightweight and compact 98HP DIY Skiff and power solution for Eurorack.

It is made from aluminium, acrylic and features a PCB base which doubles as an integrated bus with 14 connection points.

The integrated power supply provides 625mA +/-12v and 1A 5v rails.

The Jumpskiff will be available as a DIY kit for €190 (+ local taxes) and will be launched at Superbooth '17, Berlin in April."

NAMM 2017: Skein Modular Eurorack Cases

Published on Jan 22, 2017 Synth Anatomy

Note this is the first Skein Modular post.

NAMM2017: Introducing KOMA Elektronik Field KIT and Cases and Power System

Published on Jan 19, 2017 Analogue Zone Showroom / Synths and Studio

"Introducing KOMA Elektronik Field KIT and Cases and Power System"

You can find Field KIT details posted here.

http://www.analoguezone.com/

NAMM2017: Introducing WMD New Eurorack Modules

Published on Jan 18, 2017 Analogue Zone Showroom / Synths and Studio

"Introducing WMD New Eurorack Modules

WMD - Modbox
WMD - Arpitecht
WMD - Triad
WMD - MSCL
WMD - Overseer
WMD - Advanced Trigger Sequencer (prototype)"

http://www.analoguezone.com/

NAMM2017: Introducing Pittsburgh Modular Structure EP-270 and EP-420 Eurorack Cases

Published on Jan 18, 2017 Analogue Zone Showroom / Synths and Studio

"Introducing Pittsburgh Modular Structure EP-270 and EP-420 Eurorack Cases"

http://www.analoguezone.com/

NAMM 2017 Doepfer Press Release

Click each pic for the details.

High level:

A-112-2 VCO

Vintage Edition of A-100 Modules

A-135-4 VC Performance Mixer Modules

A-110-6 Trapezoid Thru Zero Quadrature VCO

A-150-8 Octal Manual/Voltage Controlled Programmable Switches

A-100LC1 Small Eurorack Case

CLICK FOR MORE »

Introducing DNGR:TECH 12UFO Eurorack Portable Flight Case

"'Dangerous Technologies' or DNGR:TECH is happy to introduce "12UFO" - a Portable 12U*104HP Eurorack Flight Case.

DNGR:TECH's modular cases are well-engineered, carefully assembled by hand from the highest quality of materials, and are symbolized by minimalist aesthetics to bringing focus solely on sound design - hidden screws and simple straight lines combined with the raw natural wood are the key elements in the design.

12UFO by DNGR:TECH is a 12U*104 HP eurorack modular portable flight case with integrated switched power supply solution with the following specs: +12V @ 4A, -12V @ 2A, onboard VGreg provides +5V from +12V bus. Head to motovilo.com for additional details regarding power supply.

Main features:
- Adjustable detachable angle lid stand which allows two opened lid positions: 100° and 120°.
- Integrated dimmable LED strip. LED dimmer is presented on a separate PCB with a separate voltage regulator. LED strip can be completely turned off with a potentiometer set all the way CCW. No additional wall warts will be required as well - the power for the LED will be routed from the main DC power jack via a pair of Y-cables.
- Power supply boards and busboards are mounted with screws completely hidden.
- Lightweight construction - powered case weight without modules: 7.5 kg.
- Case can save a patch while closed.
- Removable lid - case can be split in two independent 6U cases.

For additional details please head to http://dngr.tech"

Note this is the first DNGR:TECH post on the site.

CLICK FOR MORE »