MATRIXSYNTH: horstronic.


Showing posts with label horstronic.. Show all posts
Showing posts with label horstronic.. Show all posts

Tuesday, July 11, 2017

Patch Ideas # 1 - Horstronic Joystick + Button and o_C as quantized S&H


Published on Jul 11, 2017 Synth Diy Guy

"A quick video showing the Arcade Button, Joystick and Sample and Hold combination to make improvised bass lines that are always in tune. Showing off the Arcade Button's quick response for percussive playing."

Horstronic Joystick – Full DIY Kit

Saturday, July 01, 2017

Kit Review # 8 - Horstronic Arcade Button


Published on Jul 1, 2017 Synth Diy Guy

"Unboxing, construction and musical performance with the Horstronic Arcade Button Kit from Thonk!

You can get it here: https://www.thonk.co.uk/shop/horstron...

My Patreon: https://www.patreon.com/quincas

Video by Quincas Moreira, Music by Quincas Moreira and Thalma de Freitas."

Sunday, June 25, 2017

Kit Review # 7 - Horstronic Joystick


Published on Jun 24, 2017 Synth Diy Guy

"Unboxing, Construction and a Demo of Thonk's Horstronic Joystick eurorack module kit!

Get yours here: https://www.thonk.co.uk/shop/horstron..."

Wednesday, August 26, 2015

horstronic. Waveslicer Demo


Published on Aug 26, 2015 PianoHorst

"This is a quick demo of the basic functions of my new module, the Waveslicer."

via Muff's

"The Waveslicer can be described as some kind of special waveshaper.
It can cut a wave into slices and move those slices up and down.
It simply does that by adding an offset at a defined point of the wave. This point is the threshold, set by the Pulsewave pot. The amplitude of the offset is set by the Amount pot.
So for example if you have a sinewave of 10Vpp (-5V to +5V) and set a threshold of 2.5V and an amount of 1V, it will add an offset of -1V as long as the wave is above 2.5V.
To make it all symmetric, all that is also happening on the negative half of the wave, which means that in this example you will also have an offset of 1V as long as the wave is below -2.5V.

To make it all a bit more interesting, this is all done twice at the same time, so there are actually two waveslicers working in parralel.
Also, every described parameter is fully voltage controllable with an attentuverter at every CV input.

All that is pretty hard to describe in theory, so I made up a little diagram to explain the functions of the module.
I will also add some videos in the next days which will make it even more clear.

I primarily designed this module as an audio waveshaper but it's DC coupled, so you can also use it for CVs. This can be a lot of fun, for example when mangling LFOs.

I have a working prototype which still needs some finetuning but I think I'm almost there.

Shane of X1L3 was so kind to make a panel for me. The final panel will probably look pretty much the same as in the first picture (thus aluminium colored with black text), but I think this looks nice, too!
If there is enough interest, maybe I can also offer a black panel.

This thread is under construction and I will work on it over the next days and weeks, especially add audio/video demos and stuff like that, but I thought it might be nice to involve you a bit by posting the information I have. So please feel free to tell me what you think about this/ ask questions if there are any confusions (I'm pretty sure there will be confusion, as I don't feel too confident about explaining this module)."

Wednesday, June 05, 2013

horstronic. TR-505 mkII (Circuit bent Roland TR-505)


Published on Jun 5, 2013

"This is a short jam on the new horstronic. TR-505 mkII!
It's a circuit bent Roland TR-505 in a handcrafted wooden case with aluminium panels.

The features are:
- Individual Pitch (switchable between original/individual clocks) and Volume for all 8 drum tracks
- Global Pitch (1 Octave up and down)
- 28 points patchbay (8 of them are wired to the individual pitch clocks)
- 3 LEDs which can be wired between the points of the patchbay for bend variations
- 8 sequencer glitch buttons for rythm variations
- 4 synth tones with volume pots, triggered by the drums
- Distortion and feedback pots

If you are interested in this, you can send me a message here or on facebook. I'm planning to build some more 505s so just hit me up and I will make you an offer!

Check out my facebook fanpage!
https://www.facebook.com/horstronic"

via Malte Horstmann on The MATRIXSYNTH Lounge
NEXT PAGE HOME


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH