Moog 1125 Sample & Hold Controller

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"This is a super cool unique controller that I know works with the Minimoog Model-D & the Sonic Six

It’s basically an arpeggiator that also works on two destinations at once

On the Model-D filter cutoff, pitch, and or volume

It gives blendable sample & hold signals with variable patterns"

CLICK FOR MORE »

MOOG SAMPLE AND HOLD MODEL 1125 SN 1659

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Tone Tweakers eBay | Reverb

Note auction links are affiliate links. See the site's privacy policy for more info.

"Sample-hold controller for Minimoog, Sonic 6, Moog Modular, etc. Professionally serviced, throughly tested and in full working order.

Replaced broken fader.
Replaced 6p and 2p jones plugs.
Cleaned 8p jones socket and plug.
Cleaned up inside and out.
Installed replacement green slider caps on faders.
Replaced 1/4" jack.
Fully tested multiple times.

Note: The shaft of the fader we replaced was shorter than the other two, but it works perfectly."

CLICK FOR MORE »

Moog 1125 Sample- Hold SN 2885

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"This Moog 1125 controller was professionally serviced by one of the best techs in Alberta, Canada very recently (September 2022), so it can be enjoyed for years without issues.

Here is the list of the works done on this Moog 1125:

• Recapped completely, preventatively; all capacitors are replaced by high-quality ones.
• A new Glide slider is installed in place of the original slider with the broken taper. The original working slider is included.
• All controls are cleaned.
• Plug contacts are cleaned."

CLICK FOR MORE »

Moog Sample-Hold Controller model 1125 SN 2677

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"’s been serviced and in good working condition. The unit works with most vintage Moog synthesizers, like the Multimoog, Minimoog Model D, Moog Modular Systems, Micromoog. It needs a 6-prong accessory port for the powering, an s-trigger input, osc input, filter or volume input.
Cosmetically it’s in good condition considering its age with some signs of use. There are some scratches, I think the white knobs on the faders are not the original ones, and there’s some wear and tear on the knobs / lettering."

CLICK FOR MORE »

Moog 1125 Sample and Hold

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Really rare vintage Moog 1125 sample and hold controller.

Vintage item from the early 1970s.
AMAZING unit. Lots of (unexpected) fun.
Super rare. Fantastic condition!

Outputs two control voltages and one trigger voltage.

Has all original buttons and knobs."

CLICK FOR MORE »

1974 Moog Minimoog Model D SN 3548 w/ 1125 Sample-Hold Controller SN 1927 w/ Schematics

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"1974 Minimoog model D, Serial 3548. Recently professional serviced, with:
-Keys leveled and bushings replaced
-All contacts, switches and pots cleaned
-Replaced power cord

Includes flight case and ORIGINAL owner's manual with schematics and sound charts.

INCLUDES SUPER RARE (only one other on the market) 1125 Sample-Hold Controller, Serial 1927. I have only seen two others of these in the last 5 years.
The 1125 generates random/staircase waveform patterns and samples/holds your creation!
The 1125 can be used with the Minimoog Model D, Micromoog, Multimoog, Polymoog, Sonic Six, and Moog Modular system"

CLICK FOR MORE »

Moog 1125 Sample-Hold Controller

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Vintage Moog MiniMoog Model D w/ 1125 Sample and Hold Controller

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Moog Sample Hold Controller Model 1125 - Refurbished

video upload by 123synthland

"Moog Sample & Hold model 1125. Fully refurbished and for sale at tonetweakers.com. For use with various Moog synthesizers such as the Minimoog, Moog System 55 and more. We buy, refurbish and sell vintage analog synths and electronic musical instruments. Please sign up for our newsletters at tonetweakers.com. Thanks for watching!"

Moog 1125 Sample & Hold Controller 1978

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"The Buttons are renewed since they showed their age in increasing dropouts, nothing special for a 1978 manufactured Gear. Worked perfect in combination with same aged Model D to this day."

CLICK FOR MORE »

Moog Sample Hold Controller Model 1125 Black SN 1970

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Serial number 1970."

CLICK FOR MORE »

Original 1970's MOOG 1120 Voltage Pedal Controller

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"The 1120 appeared around 1973 and continued in production with revisions at least until 1978, by which time it had been joined in the Moog catalogue by the 1130 Percussion Controller, the 1121 footswitch, the 1150 Ribbon Controller and the 1125 Sample & Hold.

The 1120 is a very sturdily built all-metal foot pedal, has a 9V battery internally (or can use a 9V mains transformer) and has two quarter inch jack outputs marked Output and Aux Out - in fact these are sending exactly the same output, from near 0V to near 9V.

The 1120 was intended for use with the Moog Sonic 6, MiniMoog, Moog Modular systems and other products, so it's an ideal addition to any Moog collection. However it's perfectly compatible with any modern CV-based modular system including Eurorack systems, creating volume swells, filter wah effects, VCLFO speed changes or anything you need.

This one's in extremely good condition with no significant wear to the Moog logo and underside label."

Moog Sample Hold Controler 1125 SN 2860

Note: Auction links are affiliate links for which the site may be compensated.
Published on Apr 6, 2015 JW GT

"Seconds after this video I broke off the slider on the far right. Still works 100%, just needs a slider."

via this auction

"Super-rare Moog Sample & Hold controller for sale in working order and good condition. This is a great accessory for your vintage Moog.

The 1125 adds a random/staircase waveform pattern generator, and sample and hold options to your vintage Moog (Minimoog, Sonic Six, Modular etc). Power is drawn from the synth itself so this will work anywhere in the world. Great and creative tool that generates all kinds of wild patterns and sequences…

CONDITION: In good condition. “RANDOM-SAWTOOTH” slider post has snapped off. It still works, and can be moved with a jewelers screwdriver. The wooden end cheeks are custom made. Included with sale are one of the original cheeks with the original slider cap that came off (the snapped off post is in the cap).
The cable was created by a tech in Nashville; it is more stable than the original."

CLICK FOR MORE »

Home-Brew Moog 904-b module - first test

Published on Jun 29, 2018 noddyspuncture

"Just testing the first of my 904-b H.P.F. builds - there was actually a problem with one of them - it wasn't passing audio but 'oscillating' with a low frequency 'thump' on the output. But changing a cap value fixed that. Strangely, the other one I built - exactly the same - didn't have that issue. Now both are working perfectly...! here I am triggering it with my 1125 S&H and also modulating it now and then with the 921's sawtooth from the aux output."

Moog System 15 with 1125 S&H, Bode & FFB

Published on Jun 26, 2018 noddyspuncture

"This time turning to the bass frequencies and using the fixed filter bank... probably best to use decent speakers - or at least headphones..!"

Moog Mini Model D w/ 1125 Sample and Hold Controller Demo

Published on Apr 4, 2017 RetroLinear

"Mini moog model d with 1125 sample and hold module!
Fully restored / overhauled @ Retrolinear

Have a broken mini? Give us a call 215-699-8000"

Moog Sonic 6 and 1125 Sample & Hold

Published on Feb 12, 2018 noddyspuncture

"Moog Sonic 6 with the 1125 sample & hold module..."

DIY 1125 Sample & Hold Build... Complete...!

Published on Jan 6, 2018 noddyspuncture

"My DIY sample & hold module - a Moog 1125 clone with some custom 'extras' - is now complete..! Here is a video I made of it - hooked up to one of my Minimoog's (the one I bought from 10cc) - before it takes it's place inside my Modular...!"

The Moog 1125 was actually a little desktop strip module as you can see here. This is a Moog 5U format port.

Moog 1125 Sample & Hold - home brew DIY...

Published on Dec 16, 2017 noddyspuncture

"So, here's the first video of my 1125 sample & hold module... I got it working today. Only using one channel of CV here, just the pitch for now. It's all working apart from the noise generator - the noise chip was getting warm so I removed it while I was debugging a few faults I had. One IC I used - the 3080 - was faulty and would you believe, a transistor array IC that I bought brand new had one transistor in it that was open circuit..!"

Minimoog, Moog 1125, Bode, and MF104M delay #2... upside down..!

Published on Oct 17, 2017 noddyspuncture

"My very first upside down video... playing the Bode and the Sample & Hold..."

Lock screen, and rotate. :) Minimoog being processed by a Moog 1125 Sample & Hold the Bode Frequency Shifter, and an MF-104M delay.