MATRIXSYNTH

Sequential Circuits Prophet VS

Note: Auction links are affiliate links for which the site may be compensated.

Eurorack MFOS Noise Toaster

Note: Auction links are affiliate links for which the site may be compensated. NOISE TOASTER MOD Rack Eurorack size panel BY nvd new voodoo design newvoodoodesign.com

Published on Apr 19, 2014 J Tracy·6 videos

via this auction

"This is a MFOS Noise Toaster analog synthesizer built/modified by New Voodoo Design as a prototype/example model for a customer who wanted a series of MFOS synthesizers in panels that would fit in a Eurorack rack. This one could be put into any rack that would fit that size panel (bit more than 5" in height) or in an enclosure/box of almost any type (hammond, radio shack, etc) or left as it is.
Has the Guitar (1/4") In mod, but this does NOT mean this is a 'guitar synth'-that mod merely allows an audio in to the VCF.
There is also another mod to allow voltage in to control the VCO
Other notable things:
Wide Range VCO
White Noise Generator
LED freq indicator
low Pass Filter
VCA
AR Generator with Repeat or Manual Pushbutton
LFO with Square, Integrated Square and Differentiated Square waves
Nicely Normalized Switching Scheme
PCB Has Pads for Interface to Other DIY Projects.
Uses one 9V Battery (portable)
Low Current Design Extends Battery Life
Makes a plethora of plethoras of cool and interesting sounds
That's pretty much it. Quality design, very cool analog synth sounds can be had from this."

Arnold+Sukroso - Role For Gold (official HD) Featuring AcPad Guitar Prototype & Synths

Published on Apr 17, 2014

"Spot these synths (every costume color plays a different track):
- Nord Modular G2
- Nord Rack 2
- Korg Kaoss Pad Mini
- AcPad Guitar Prototype (acoustic guitar with drum pads and MIDI controllers)
- an Electronic Drum Kit
- Bilbo The Cat :-)

https://itunes.apple.com/de/album/synchrotron-ep/id838335884?uo=4

ROLE FOR GOLD is the first single of the upcoming SYNCHROTRON E.P. by the Berlin based one-man-band joint venture of drummer Sebastian Arnold and Robin Sukroso on guitar.

Slipping into the colourful roles of different electronic instruments, the two instrumentalists discover a golden place in the summer heat.

Concept: Arnold+Sukroso
DoP & Editor: Paul Alpha
Camera Assistant: Jonas Niemann
Set Manager, Costume Design & Make Up, Catering: Chrissi
Music written by Rainer Hirl
Music produced by Sebastian Arnold

Part of 'Synchrotron E.P.', Release 09.05.2014

Thanks: Location Reitwein, Boris, Tine Margot, Helene Cat Bilbo

No animals were hurt during production (except mosquitoes).

www.robinsukroso.com
www.sebastian-arnold.net
www.paul-alpha.de

(c) 2014"

Note this is the first AcPad post.

audiowerkstatte midi-restarter & midi-clock-divider

"The midi-restarter helps you to start or stop your MIDI-slave independent of your MIDI-master, but alway in perfect synchronisation.

You push the buttom and the audiowerkstatt midi-restarter sends a MIDI-start/stop-message at the beginning of the next bar to ensure that all following MIDI-devices run in the correct timing.

There are 3 modes of operation:
1. At the beginning of the next bar, a MIDI-stop-message and immediately after that a MIDI-start-message is sent. In this mode, a standing sequencer is restarted and a running sequencer is "pushed" into the correct timing. This mode does not work with all MIDI-devices as some devices require a short break between MIDI-stop- and MIDI-start-message. For these devices, the second mode can be selected.

2. A short time before the next bar starts (one MIDI-clock-message=1/24 quarter-note), a MIDI-stop-message is sent and then at the next bar a MIDI-start-message is sent. In this mode, a standing sequencer is restarted and a running sequencer is - after a very short break - "pushed" to the correct timing. This mode corresponds to the first and is intended for MIDI-devices that require a short break between MIDI-start- and MIDI-stop-message.

3. If the sequencer is running, a MIDI-stop-message is sent at the next bar and if the sequencer is standing, a MIDI-start-message is sent at the next bar. In this mode, a standing sequencer is restarted and running sequencer is stopped at the next bar.

It can be switched between the time-signatures 4/4 and 3/4.

You can also set whether only the newly created MIDI-clock and the MMC commands (start, stop, continue) are sent or the midi-data, received at the MIDI-in, will be mixed with that."

"The audiowerkstatt midi-clock-divider is a clock-divider for the MIDI-clock.

The audiowerkstatt midi-clock-divider divides the MIDI-clock of the MIDI-master, whereby the MIDI-slave runs correspondingly slower. The division-ratios are 1/1, 1/2, 1/3, ..., 1/8, 1/9.

If the division-factor 1/1 is selected, the MIDI-clock is simply passed through. With the division-factor of 1/2 the MIDI-slave runs at half the speed. So 16ths-notes will be 8th-notes and the loop is twice as long.

Very useful to double the loop length of the MIDI-slave (eg MIDI-sequencer or [audio-]looper). When using the division-factor 1/8 and an originally one bar long loop runs over 8 bars.

And good for experimental musicians, especially if an odd division-factor is selected and MIDI-master and slave seem to be not in sync, but from time to time come together in perfect sync.

You can also set whether only the newly created MIDI-clock and mmc commands (start, stop, continue) are sent or the, at the MIDI-in incoming data, will be mixed with that."

Note this is the first audiowerkstatte post on MATRIXSYNTH.

TB 303 Acid Jam - Exercise 03

Published on Mar 31, 2014 Tonguç Endem·5 videos

"TB-303, TR-606, Minitaur, SH-101 and Analog Four live jam thing.
TB-303 is sending CV to Moogerfoogers and CV+Gate to Minitaur.
Minitaur melody is TB303 sequence from CV+Gate, live transposed with midi from Push
SH-101 melody is SH-101 sequence triggered by TR-606 and live transposed on SH-101 .
Ableton sends midi clock to Analog Four and Kaossilator Pro+
Analog Four sends din sync to TB-303 and TR-606.
TB-303 CV is used with Moogerfooger Freq Box frequency for FM distortion.
Moogerfooger Phaser, Freqbox and Analog Delay used all with overdrive on TB-303 only.
TR-606 used with Analog Soultions mod: longer cymbal decay and snare snappy+decay adjustments
Kaossilator Pro+ used for noise/laser sound FX.
Ableton Stereo delay and convolution reverb on Minitaur."

Rat Style Eurorack Suitcase

via Giovanni Napoli on Facebook

I need to make me some MATRIXSYNTH stickers.

Don't forget, the TRASH_AUDIO Synth Meet 14 is coming to Portland, OR on May 24.

Butane Star (Cinematic) = OP1+Octatrack+Cocoquantus+Samplr+Particle

Published on Apr 19, 2014 A Box In The Sea·7 videos

"All sounds are from the OP1. I pre-sampled 2 melodies on the Octatrack, chopped and rearranged them with onboard effects. I resampled 1 of those on Samplr, pitched it up and applied onboard effects. The rest of the piece is played and mixed live to 2 track. I have 2 Nano Kontrols, one is for the Octatrack levels and rate for each track and the other is controlling a Big Sky reverb patch. The live OP1 is going 1st into the Red Panda Particle - Big Sky Reverb - Cocoquantus. So many experiments to do with this setup it boggles my mind. Thanks for watching and please feel free to ask any questions."