MATRIXSYNTH


Sunday, July 23, 2017

Rheyne - Sequenced Jam #45 (Moog DFAM, Moog Mother-32, Make Noise 0-Coast)


Published on Jul 23, 2017 Rheyne

"All sounds are from a Moog DFAM and Make Noise 0-Coast, with a pad coming from a single Mother-32 running through an Erica Synths Black Hole DSP. The DFAM is providing percussion on VCO 1 and an arpeggio on VCO 2, with its pitch controlled by an Erica Synths Pico Seq. No outside MIDI or DAW was used, all notes are triggered by 3x Mother-32 sequencers and the Erica Pico Seq."

Frontline Thomas Henry 555 VCO Eurorack Patch: Analog Forest and the Mutant Birds


Published on Jul 23, 2017 While We Were Sleeping

'Eurorack Patch:
* Frontline Thomas Henry 555 VCO With Linner & Exponential FM
* Going through God’s Box ‘Humpback’ Filter
* into loads of Delay Chorus & Reverb

Sounds Convincing / Good ?
Or Just an annoying geeky experiment?
The birds made what they thing perfectly clear. Not kidding I went outside while editing the video and 😭 😭 😭 . Watch until the end to find out :) and pleas subscribe."

Mutable Instruments - Elements: Dark Orchestra [vs Edges & Akemie's Taiko: Jaunty Melody]


Published on Jul 23, 2017 isvisible / isinvisible

"Working on a new track.

Mutable Instruments - Elements: one output being fed back into itself via a vca and filter, and lots of outputs from the Livewire Chaos Computer controlling a lot of inputs on the Elements.
I use this patch, or a variation of it quite a lot and have given it the nick name The Dark Orchestra.

Mutable Instruments - Edges: Running an arpeggio from a Korg MicroKey through a Polyend Poly module and feeding four of the cv's to Edges, and four gates to envelopes to shape the individually filtered (Doepfer filters) outputs of Edges. Then run through input one of the Modcan Dual Delay.

ALM - Akemie's Taiko: Dead simple, cv from the Klee. Then run through input two of the Modcan Dual Delay.

Folktek - Matter: Dead simple, two trigger outs from the Klee, then the output of Matter routed through the Intellijel Springray.

That's about it.

For more music of the mainly finished variety:
http://isvisible.bandcamp.com [melodic]
http://isinvisible.bandcamp.com [not as melodic]
https://soundcloud.com/isvisible [a mixture of both]"

Moog Minitaur & Strymon Big Sky


Published on Jul 23, 2017 3rdStoreyChemist

"Minitaur synthesiser through the Big Sky. Minitaur is sequenced from an Elektron Octatrack.

No further processing except normalisation."

Don't miss the V2.2 update for the Minitaur which adds new functionality and the ability to access "under the hood" parameters directly on the unit.

Orazio Del Core - Getso


Published on Jul 23, 2017 vistaandaudio

Music by:
Orazio Del Core - Getso
2017
soundcloud.com/oraziodelcore

Korg volcas, kaossilator 2, mini koss pad 2, monotribe, Waldorf Streichfett & Rocket, Korg Triton Taktile.

ELKA EK22 & DX7II FD FLANGED KEYS AND PAD


Published on Jul 23, 2017 synths colors

"No External Effect Added, As Usual..."

Summerjam live #02 with the Elektron Analog Four - Attention: Subbass!!!


Published on Jul 23, 2017 Rickinger B.

"Live-Performance only with the Elektron Analog Four and me during my holiday in the Tuscana.

Please use good headphones or monitors for the Subbass ;-)

I would be very happy if you leave a comment or a like. Thanks and peace!

Used equipment:
Elektron Analog Four
Tuscana white wine"

Moog Minitaur Update v2.2 Released Allowing Direct Access to Extended Parameters


You can find the download on Moog's website here.

Minitaur owners will be happy to know they can now access parameters directly on the synth that were previously only available through the Minitaur's software editor. The Glide switch now acts as a shift key allowing you to access the parameters. To the left you can see the shortcuts, which include the ability to save up to 128 presets directly on the unit itself, modulation sources, hard sync, oscillator 2 modulation, CV mapping, and CV to MIDI conversion, and more.  The update includes additional modulation sources including new LFO waveforms, sample & hold, and the filter envelope.  VCO 2 now supports hard sync.

Update:

The Change Log:

"v2.2.0
• Added RPN 2 Coarse Tuning support (-64 to +63 semitones)
• Added LFO modes: Square, Ramp, Saw, Sample/Hold, Filter EG • Added VCO2 Hard Sync
• Added “VCO 2 Only” option for LFO-to-VCO pitch modulation.
Additional shifted panel controls
• Hold GLIDE + turn LFO RATE knob to set LFO Waveform (Tri, Sqr, Saw, Ramp, S/H, Filter EG).
• Hold GLIDE + turn VCO 2 LVL knob to turn VCO 2 Hard Sync on or off.
• Hold GLIDE + turn VCO LFO AMT knob to set LFO “VCO2 Only” (Off or On).
• Hold GLIDE + turn FILTER ATTACK knob to set Filter EG Delay Time (0ms to 10s).
• Hold GLIDE + turn GLIDE knob to set global Top Octave Wrap behavior (Off or On).
• Fixed LFO KB Reset when LFO Midi Sync is active
• Fixed Release switch response to editor when in independent decay/release
• Restore edited preset if saving is initiated on the hardware, preset location is changed,
and then save is canceled
• Last received MIDI mod wheel value persists, when turning “load preset mod wheel” on/off.
• Improved LFO MIDI Sync
• Re-mapping CV inputs restores preset value for previously-mapped parameter .
• Removed internal pitch-CV offset on boot (“cv start note” is now 0; was 20 — can also set a
custom CV start note via sysex F0 04 08 23 18 00 nn F7, where nn = start note in hex)
• Pitch-CV input re-scaled to full range when mapped to parameters other than Pitch-CV
• Wrap top octave fix, for small VCO2 detuning values
• Filter EG delay time range set 0 to 10 seconds
• Glide time restored after Note Calibration
• Minitaur no longer adds a tilde (~) after preset name, when saving on the hardware"

New GUI Renders of the Upcoming "Super Signal Processor" by Percussa


We saw the final hardware design for Percussa's upcoming "Super Signal Processor" eurorack module. We now have some images of the graphical user interface in via Bert Schiettecatte of Percussa:

"I worked on GUI mockups for the module the past couple of days and went back and forth on them with a few eurorack people, here is the result. All feedback/ comments welcome! I'd also like to confirm we are going to do a kickstarter for this module and will take all feedback and input into account as I set up the page and work on it in the coming weeks."

Making The Tracks - Elektron Analog Keys , RTYM and Dave Smith Pro 2


Published on Jul 22, 2017 100 Things I Do

"This week I thought I would do something with my Elektron kit + the Dave Smith Pro 2. Its been a while since I actually turned on the Pro 2 being consumed with learning and using other parts of the studio. I forget how great the filters can be … oh.. .and how you can over saturate the digital delay lines a little too easy when not focusing!

Thought I would do something a little more like the tracks I normally make when not making youtube videos. The two things I seem to get asked for the most are longer clips and people wanting to see me work live. Australian internet it a little slow at best so live streaming is not possible in my area without using LTE/4G Mobile data….Very Expensive!

I set up my camera and the Microsoft Surface 4 to record the clip and edited the results. The music and my playing is 100% live (at the time) warts and all. Hope you enjoy :D"
PREVIOUS PAGE NEXT PAGE HOME


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH