MATRIXSYNTH

sleepless on the 25th

Three spooky drones by osixoonesevenone featuring a eurorack module and Ensoniq ESQm controlled by a Linnstrument.

3D render by Metin Sevin. Note the knobs go from birth to death.

Video below.

"Gear used : 4 x 84 HP and a minicase of Eurorack, Ensoniq ESQ1 m, Linnstrument 128, Eventide Space, a smal Mackie mixer.

The ESQm is controlled by the Linnstrument.

On the eurorack there is a drone and some sound effects, these are vertormixed with an Intellijel Planar, and manipulated with de Horstronic joystick.

Here is a pic an my Instagram off the minicase with the joysticks.

The noise source is from a Hexinverter Mutant Claps and makes the wind sound on track II, like in this video.

The ESQ1m is played with one padsound in 8 voice polyphony . The ESQ1 sounds ussed i made for playing with a Linnstrument. Using pressure and vertical movement these sounds change dramatically.

Tracks I and II start with the ESQ1, track III starts with a growling Eurorack sounds. Reverb = Eventide Space pedal."

Published on Nov 23, 2017 osixoone sevenone

"Eurorack modular and Ensoniq ESQ 1m played with LInnstrument."

verbos harmonic oscillator | minimal modular music

Published on Nov 23, 2017 Elinch

"simple patch with verbos harmonic oscillator controlled by xaoc batumi into mutable instruments clouds
pads by make noise morphagene (orthogonal devices er-301 only for mixing both morphagenes together)

recorded live with tascam dr 100. no audio processing. for the best listening experience listen to the video with headphones or good speakers."

DSP Synthesizers Black Friday Deal - New uMIDI2CVplus - Only 10 Available

via DSP Synthesizers:

"The uMIDI2CVplus adds a simple USB MIDI to CV to your eurorack or analog synth.

Features:
» One Pitch CV output 1volt/octave, 5 octaves (C2-C7)
» One Gate output key on/off
» 2x Auxilary CV outputs 0-5volt.
» Quad Drum triggers.
» USB-HID compliant, no driver required
» 1 Micro-USB input for MIDI and power

This works the same as the USB-MIDI2CV/plus but does not support Hz/Volt and S-trig.

The uMIDI2CVplus is available during Black Friday and is $39 including shipping.

Starts tonight at 24:00

Only 10 available."

Noise Engineering Thanksgiving Eurorack Jams

Noise Engineering Thanksgiving jam with Integra Solum

Published on Nov 23, 2017 Noise Engineering

"Jamming with the upcoming Integra Solum. I use it as the trigger for two BIA and a Manis Iteritas, and also as a CV input for all of these plus a Loquelic Iteritas. No other triggers or CV are used except a pitch sequence for Manis."

Thanksgiving Manis Iteritas jam

Published on Nov 23, 2017 Noise Engineering

"Manis Iteritas and Loquelic Iteritas Percido making crazy sounds with the Mimetic Sequent and Malekko's Voltage Block and Varigate 8+. Horologic Solum as the one master clock to rule them all."

MOOG MOTHER32 meets ACOUSTIC PIANO

Published on Nov 23, 2017 peter synthbrothers

"first try out theme: Moog meets acoustic
sorry for the noise, have to buy a better mic for the piano
I am trying the combination between analogue and acoustic
maybe it is well"

Say Hello to Tetrapad! from intellijel

Published on Nov 23, 2017 intellijel

"Say hello to Tetrapad! This video provides a quick introduction to Tetrapad with an overview of its features and behaviours.

Tetrapad is a versatile, multi-dimensional, touch-sensitive control surface for Eurorack. Each of its four pads use force sensing resistors to respond to both the vertical position of your finger and its pressure. Four push encoders and a shift function give you even more tactile control over your modular system.
Tetrapad operates in numerous modes — each of which configures the module to perform a specific control task. Through these modes, Tetrapad can emulate a bank of faders; a voltage storage device; a finger drumming surface; a chord generator; an 8-key keyboard; four independent LFOs; or an 8-switch panel. The chosen mode determines what type of signal (CV, note, trigger, gate, etc.) is sent from each of Tetrapad’s eight independent outputs, while its multitude of multi-colored LEDs keep you informed of exactly what’s happening within each mode.
Tetrapad automatically remembers how you’ve configured each of its modes, and retains these settings when powered off. By default, Tetrapad automatically saves these settings every minute, or whenever you change modes. This makes Tetrapad ideal for live performance, since you know it will always power up with your configurations intact."

Tama TSQ-1000 Drum Trigger Sequencer + Simmons SDS-8 Electronic Drums (1986)

Published on Nov 22, 2017 RetroSound

"(c) 2017 vintage synthesizer demo by RetroSound

Tama TSQ-1000 Drum Trigger Sequencer

The very rare trigger sequencer features 6 channels incl. accent, (level switchable between 5V and 15V) and can be synced via DIN-Sync (24ppq, as master or slave).

There are 8 banks with 4 patterns each. Each patterns can be from 12 up to 64 steps long.

Inspired by the classic Roland TR drum machines, the unit was conceived as a control unit for Tama's TS-305 and TS-306 drum brains and works with other gear too. (Simmons, Syncussion, Vermona....)"