MATRIXSYNTH


Saturday, November 25, 2017

Buromaschinen | Blackness


Published on Nov 25, 2017 buromaschinen

"Monomachine is the main sequencer and synthesizer with melodies, arpeggios and synthetic choir, machinedrum does percussions and metals, analog4 is the power bass and some backing pad, big sky - as always - delivers the biggest sky."

Tom Oberheim Two Voice Pro Dual Analog Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Moog Mother 32 with Roland Juno 60 Bass


Published on Nov 25, 2017 Joey

"Midi sequence sent from Logic to a Moog Mother 32 with a Roland Juno 60 on the bass line and a Dave Smith Tempest on the drums. Recorded straight into logic through an apogee duet."

Introducing Konarie Chirp Rack Extension Synthesizer


Published on Nov 25, 2017


"AVAILABLE TO DOWNLOAD SOON

The Konarie Chirp is a sample based Rack Extension synthesizer instrument made exclusively for the Propellerhead Reason rack. It is the first RE synthesizer designed specifically for optional hardware control - the first RE synthesizer you can actually touch.

The layout of the Chirp matches the open source Behringer BCR2000 midi hardware to give the user a true physical
experience. For an authentic experience, you can purchase the sticker kit for the BCR 2000 from the Konarie Etsy store. The Sticker kit is sold separately and the Behringer BCR2000 is available from various retailers and on-line stores. Konarie is not affiliated with Behringer and only leverages the open source hardware as an option. All hardware support is obtained exclusively through the manufacturer and it’s affiliates.

Trademark disclaimer
All trademarks referred to within the Konarie Chirp advertisement are the property of their respective trademark holders. None of these trademarks holders are affiliated with Konarie Music LLC or its products. The referrals to these trademarks do not in any way constitute trademark use.

For more information, please visit www.konarie.com"

Future Retro Revolution SN FREV0239

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Revolution analog synthesizer made by Future Retro. This synth was designed to be a TB-303 clone with some awesome additional features. In addition to the classic 303 sound, the Revolution has awesome sounding built in effects, a “remix” mode to help add variety to the sequencer and a built in overdrive circuit which gives it that classic “Devilfish” sound. This unit is in good condition and everything works as it should... the only exception is that if the unit is off for a while, it will lose its saved sequence data, so it probably needs a new internal battery (a cheap and quick thing to replace)."

social entropy engine sequencer with CV expansion synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Korg Arp Odyssey FS Rev1 Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Tetrapad: Chapter 2 - Voltages Mode


Published on Nov 25, 2017 intellijel

"In Chapter 2 we check out Tetrapad's Voltages Mode, which turns the four pads into a panel of eight buttons that can each send eight stored voltages. This puts 64 stored voltages at your fingertips which can create a sort of preset memory for your modular system! Voltages can be randomized, and they can also be slewed to make them slide from one set of values to another.

Tetrapad is a versatile, multi-dimensional, touch-sensitive control surface for Eurorack. Each of its four pads use force sensing resistors to respond to both the vertical position of your finger and its pressure. Four push encoders and a shift function give you even more tactile control over your modular system.
Tetrapad operates in numerous modes — each of which configures the module to perform a specific control task. Through these modes, Tetrapad can emulate a bank of faders; a voltage storage device; a finger drumming surface; a chord generator; an 8-key keyboard; four independent LFOs; or an 8-switch panel. The chosen mode determines what type of signal (CV, note, trigger, gate, etc.) is sent from each of Tetrapad’s eight independent outputs, while its multitude of multi-colored LEDs keep you informed of exactly what’s happening within each mode.
Tetrapad automatically remembers how you’ve configured each of its modes, and retains these settings when powered off. By default, Tetrapad automatically saves these settings every minute, or whenever you change modes. This makes Tetrapad ideal for live performance, since you know it will always power up with your configurations intact."

intellijel Tetrapad

Portabella Modular Synthi On The Run theme


Published on Nov 25, 2017 Pin Electronics & Ramcur
Re-Published on Nov 26, 2017

http://wp.thesynthi.de

Volca Circuit RM1x Electronica Session 4


Published on Nov 25, 2017 014london70

"Dug the RM1x out of the loft and just needed to familiarise myself with it once again.

This is my first test!

Volca Sample and Keys which is being sequenced by the RM1x. Circuit is syncing to the RM1x.

Recorded in AudioShare via a Behringer Xenyx mixer and mastered in Final Touch."
PREVIOUS PAGE NEXT PAGE HOME


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH