MATRIXSYNTH: North Coast Synthesis- Coiler VCF-multimode filter unboxnig and first sound

Saturday, December 29, 2018

North Coast Synthesis- Coiler VCF-multimode filter unboxnig and first sound


Published on Dec 29, 2018 Dziam Bass

"North Coast Synthesis their Coiler VCF-multimode filter.

After a little bit of fun, it is certain to say that this is a great filter with a very smooth structure that translates into very beautiful sounds. The Coiler multilayer filter and rectifier pack the entire sound shaping nest into a single Eurorack 8HP module. It is a bipolar floating point filter based on a unique integrator design that stores energy in both induction coils and capacitors depending on the frequency range. The transition area between the two components and the saturation characteristics of traditional OTA based amplifiers offer warmth and ever-changing hues in the mid-range range, as well as hissing highs and slimminging lows. This is a slightly unpredictable filter and here we confirm it.

Definitely worth attention when the next filters are only aggressive, here you can get different colors and other saturation in traditional subtractive patches."


via North Coast Synthesis:

"The Coiler Multi-mode Filter and Rectifier packs an entire nest of sound-shaping features into a single 8HP Eurorack module. It's a two-pole state-variable filter based on a unique integrator design which stores energy in both inductors and capacitors depending on the frequency range. The transition region between the two components, and the saturation characteristics of the traditional OTA-based amplifiers, offer warmth and ever-shifting timbres in the midrange, along with hissing highs and slithering lows. This is a somewhat unpredictable filter.

With simultaneous low-pass, band-pass, and high-pass outputs, the Coiler works well in traditional subtractive patches. But its built-in full-wave rectifier is also great for adding harmonics and distortion in patches from the other coast. When combined with low-pass, the rectifier allows the Coiler to serve as a basic envelope follower, for compression and external-signal patches. It's a lot of bite for the buck, and for the rack space.

The MSK 009 Coiler VCF is available as a pre-built 6HP Eurorack module or a DIY kit. Slide one into your rack today.

All-new circuit, not a clone or imitation of anything else
Smooth-touch conductive plastic potentiometers, rated for one million operationss.
Through-hole for easy hand construction and maintenance
No compromises on build quality: real aluminum panel, not PCB material, with colour printing; nickel and gold plating on the circuit board; close-tolerance metal film fixed resistors.
Fully open design - no lock-in
Specifications
8HP Eurorack synthesizer module, 46mm deep.
Non-venomous.
Maximum current requirements in normal use: 25mA +12V, 25mA -12V. Reverse-connection protected.
Build difficulty: easy. All through-hole. Voltmeter required for adjustment.
Resources
User/Build Manual (PDF, 11M)
Source Code Package (ZIP, 22M)"

No comments:

Post a Comment

PREVIOUS PAGE NEXT PAGE HOME



©2019 Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH