Cyber Week deals just landed on Reverb: Get $675 off a Yamaha Montage-M8X + gear up to 80% off

Note: links to listings are affiliate links for which the site may be compensated.

via https://reverb.com/sale/holiday

"With the Cyber Week on Reverb Sales Event, musicians can save up to 80% off select gear, shopping the over 300,000 deals available on the marketplace—including $675 off a Yamaha Montage-M8X.

Dates: Today (Monday, December 1) through Friday (December 5)... although you should be on the lookout for a twist at the end, as well as some exclusive "get 'em while they're hot" deals launching on the 4th.

% Discount: Up to 80% off select gear. Yes, eighty percent.

Amount of Discounted Gear: Over 300,000 pieces of gear available for sale—and counting.

Staff Picks:
A Nord Stage 4 88 for $5,035 (265 off)
A Yamaha MONTAGE-M8X 2nd Gen 88-key Flagship Synthesizer for $3,824 ($675 off)
An EQD The Wave Transformer Transfiguration Oscillator Eurorack Module for just $177 ($22 off)
An Arturia MICROFREAK for just $297 ($52 off)
The Reverb Drum Machines complete collection sample pack for just $40 (20% off)
Link: https://reverb.com/sale/holiday"

Sound Master SR-88 Programmable Drum Machine w/ Original Box

Note: links to listings are affiliate links for which the site may be compensated.

via this Reverb listing

Slight pic of the inside below.

"Super cool OG programmable drum machine! Classic 80's vibe. Works! The box has duct tape on the corners to hold it together (before my time) and the battery pack is broken but the white electrical tape does the job. Can also run off a 6v adapter.

Overall in great condition, one of the screws on the backplate is stripped but it's included in the box."

CLICK FOR MORE »

Reon Driftbox R - Analog Synth SN AJ-301A w/ Original Box

Note: links to listings are affiliate links for which the site may be compensated.

via this Reverb listing

"Unleash your inner sonic architect with the Roland Reon Driftbox R, a compact yet mighty tabletop synthesizer that packs a punch. Originally designed to showcase the SBX-1 Sync Box, this synthesizer has evolved into a standout piece of DJ gear on its own. The Driftbox R is built around two versatile VCOs and boasts a remarkable filter, allowing you to craft everything from lush soundscapes to gritty bass lines. Its true strength lies in its semi-modular design, featuring CV/gate I/O that invites you to expand and explore.

Whether you're weaving intricate melodies or laying down earth-shaking bass, this synthesizer adapts to your creative needs. Use it solo with the onboard momentary button for instant envelope triggering, or pair it with a CV-equipped keyboard or sequencer for even more musical possibilities. Its compact form factor makes it a perfect fit for any setup, whether you're performing on stage or experimenting in your home studio. Limited in availability, the Driftbox R offers a unique chance to own a piece of analog innovation.

Key Features:

Updated version of the original Reon DriftBox
Two VCOs with a great-sounding filter and envelope generator
CV/gate I/O for semi-modular flexibility
Use standalone with onboard momentary button or integrate with other hardware
Compact desktop design for versatile use in different environments"

CLICK FOR MORE »

POLYEND TRACKER DESKTOP SAMPLER SYNTH & SEQUENCER

Note: links to listings are affiliate links for which the site may be compensated.

via this listing

Additional Signal Sounds listings

margin-right: 1em;

ERICA SYNTHS DB-01 DESKTOP ANALOGUE BASS SYNTH

via this listing

Additional Signal Sounds listings

ARP AVATAR Synthesizer odyssey RESTORED only CV gate control

Note: links to listings are affiliate links for which the site may be compensated.

via this eBay listing

Additional Tone Tweakers Listings

"Meticulously refurbished over approximately 22+ hours to be as good as it could possibly be, with a new set of modern faders that are way better than the originals and their copies, this unit is a real pleasure to play and is fully functional, with one exception - we disabled the guitar interface. This unit can still be controlled via CV and gate.

Why did we disable to guitar interface? This unit, like most, did not come to us with the guitar pickup and cable, so we weren't able to test it with a guitar. That said, the guitar interfaces are usually broken and beyond repair at this point. The manufacturer sealed the interface circuitry in epoxy, so if (and when) a component inside that black epoxied box goes bad, as they almost always do, they're impossible to open and repair by practical means. Also, even when the guitar interface is working, you'll need the pickup and cable, which have often disappeared over the decades. So, if you're looking for a unit that will work with your guitar, this one won't, and it's likely many others won't either, based on what we've seen - please search our listings to see if we have another in stock that does. This one contains the same synth engine as the ARP Odyssey Mk3 (with a couple very minor differences in the modulations) and can be controlled via a midi-to-cv converter or compatible vintage keyboard or sequencer. Be careful if you're considering buying one of these elsewhere - most sellers don't test them properly and don't know enough or care enough to identify and report problems, especially with the guitar section. Any avatar or odyssey that still has its original faders will almost definitely need them replaced, so consider that too. And then there are the ones that use the low quality copies of what were already low quality original faders. We already did this work, and it's expensive. Cost was around $300 for the new faders, plus additional parts, plus 22 hours of skilled labor, plus additional labor to route the sample and hold mixer output to modulate VCO2 and the filter for oscillator and filter FM as you'd have on an Odyssey (which is being performed as I type this so I don't know the total time yet)."

CLICK FOR MORE »

Moog Memorymoog Plus Pro-REFURBISHED Analog Synthesizer SN 2628

Note: links to listings are affiliate links for which the site may be compensated.

via this eBay listing

Additional Tone Tweakers Listings

"This unit's been meticulously overhauled with future-proofing measures, sparing no expense, unlike the typically half-assed jobs done by most other techs/sellers (if they even bother to service theirs). The refurbishing process required 37 hours of skilled vintage synth tech labor, plus parts costs. This work is very time consuming and costly and is reflected in our price."

CLICK FOR MORE »

Roland Juno-106 61-Key Programmable Polyphonic Synthesizer w/ New Voice Chips

Note: links to listings are affiliate links for which the site may be compensated.

via this Reverb listing

"The Juno-106 synthesizer was Roland’s successor to the Juno-60 and was first released in 1984. It was one of Roland’s first synthesizers to include MIDI and the patch memory was expanded to 128 patches over the 56 available on the Juno-60.

The synth is polyphonic with 6 voices and 1 digital controlled oscillator per voice. It has a chorus effect to fatten up the sound and by pressing both the Poly 1 and 2 switches at the same time, the synth can be played in monophonic unison mode with all 6 voices playing on every key pressed. It has a non-resonant high pass filter and a resonant low-pass filter.

It’s easy to program and remains a popular synth to this day.

This unit was fully serviced in Oct 2021 at Bell Tone Synth Works and at that time, all 6 voice chips were replaced with Analogue Renaissance voice chips. In addition, they performed the following services:

Replace 3 electrolytic smoothing capacitors in power supply, reflow solder on power transistors/regulators, adjust power supply rail voltages
Re-solder output board jacks, cleaned output level switch and tuning pot.
Clean volume pot, portamento pot and pitch bend pot.
Replace old soldered-in patch memory battery with new battery in battery holder for easy replacement in the future; reload sounds.
Calibrate all parameters to Roland specs.
Replace 2-prong Japanese power cable connector with standard 3-prong IEC C14
Replace all panel button tact switches, clean all sliders, replace crumbly slider dust gaskets with new ones.
Replaced (2) MN3009 BBD IC's in Chorus circuit with new Xvive MN3009s to reduce noisy wooshing
Repaired and re-centered bender pot by resoldering the wiring and re-aligning to get the bender working correctly."

CLICK FOR MORE »

Stranger Things - "Kids Two" Moog Matriarch Cover

video upload by Toco

"Cover of one of my favorite songs from Stranger Things on the Moog Matriarch!

https://tuomikoskimusic.carrd.co/"

KORG ARP 2600 FS DEMO

video upload by EthanRayMusic

"Here's 8 minutes of me messing around on Korg's full size reissue of the ARP 2600. This is by no means a comprehensive showcase of its sonic potential, which is vast, but just a small taste of how great it sounds.

No reverb or effects, just the pure, dry signal of the 2600 going into my interface."