Anyware Instruments - SEMtex XL - Unicorn Rare

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"works 100%. Try finding one of these, so rare and so badass.

Two voice SEM, conveniently combine to make a 4 voice SEM...

Built by the one and only, Anyware (Tinysizer) wizard Thommy."

Anyware Instruments Semtex XL Analogue Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Great condition Semtex XL Oberheim SEM clone. Works and sounds great."

CLICK FOR MORE »

Anyware Semtex XL Synthesizer Demo - Electropop

Tom Noise

"This was entirely made with an Anyware Semtex XL.
All sounds were programmed on the synth and recorded, arranged and mixed in Pro Tools HD."

See the Anyware label below for more.

Anyware Semtex XL Synthesizer Demo - Dance

Tom Noise

"This was entirely made with an Anyware Semtex XL.
All sounds were programmed on the synth and recorded, arranged and mixed in Pro Tools HD."

See teh Anyware label below for more.

Anyware Semtex XL Synthesizer Demo - Minimal House

Tom Noise

Anyware Semtex XL posts. You do not see these often. Last post was in 2015.

Happy Knobbing 2015 - Jam Sessions - TMA & Moogulator

Published on May 25, 2015 Torsten Abel

"Jam - Session by TMA

Synthesizer Live Improvisation with:
Nord Lead A1, Korg Mono/Poly, Casio VL1, Anyware Instruments SEMtex XL and InSEQt, TMSS/Theis Modular, Eurorack 3he stuff, MFB 2005 and some FX.

Many thanks to:
Frank Schüßler, Mic Moogulator and Jan-Hinnerk Helms for video recording
and all at the HK 2015"

Modular Synth Meeting Happy Knobbing 2015 Moogulator

Published on May 25, 2015

"Thanks to ReadyDot for shooting this at http://happyknobbing.synthesizers.de"

Happy Knobbing 2014 - Jam Session TMA

Published on Jun 10, 2014 Torsten Abel·45 videos

"Jam - Session by TMA

Synthesizer Live Improvisation with:
PPG Wave 2.3, Korg Mono/Poly, Anyware Instruments SEMtex XL and InSEQt, TMSS/Theis Modular,Doepfer R2M Ribbon Stick and some Eurorack 3he stuff.

Many thanks to:
Frank Schüßler and Jan-Hinnerk Helms for video recording
and all at the HK 2014

Sorry for some wrong notes on the PPG, but I had to much beer this evening ;-)"

TMA Live Improvisation @ HK 2013

Published on May 20, 2013 Torsten Abel·34 videos

"Small improvisation at the "Happy Knobbing" Modular Meeting 2013 Fischbach / Germany.
Recorded by SERGE / Jan-Hinnerk
Gear:
PPG - Wave 2.3, Waveterm B
Korg - Mono/Poly
Anyware Instruments - SEMtex XL, InSEQt
TMSS/Theis Modular
MFB - 2005, SEQ02

Thanks to all at the meeting. See you, same place, next year ;-)"

See the Happy Knobbing label below for all posts.

Analogue Solutions Telemark-K

Note: Auction links are affiliate links for which the site may be compensated.
via this auction

"The Telemark provides exactly the same features as the Semblance, but with the addition of modular synth patch points. This in effect turns it into a semi-modular design and means it can be interfaced to other modules and synths very easily.

The Telemark is a sturdily made white metal wedge, populated on the left side of the panel by lots of knobs and a few LEDs. The right side is devoted to a series of 1/8" sockets designed to provide access to core points in the synth's signal path. The back panel has a small socket for the supplied external PSU, MIDI input/thru, as well as 1/4" jack sockets for the main audio output and 2 external audio inputs.

The Telemark is an easy-to-use and fine-sounding synth, which is capable of a wide range of sounds. It uses the patch panel to add another dimension and offers some great options for processing external audio as well as transforming the internal palette. The MIDI spec gives the Telemark the ability to respond to both note on/off and velocity information for VCA and VCF sections. The patch panel allows you to route these elsewhere should you need to and a MIDI controller can be assigned to modulation duties should you wish.

The Telemark is a Oberheim SEM inspired synth like the Anyware Tinysizer, the Semtex XL and the Analogue Solutions Semblance are.

The Telemark-K is similar to original SEM but with Sample and hold, LFO square wave, noise, extra inputs, many more signal modulation options via rotary switches.

Features

Pure analogue voice & modulation circuitry.
MIDI In / Out / Thru
Patch points to allow more sound types, and to cross-patch with your modular synths
SEM type sound.
Similar SEM layout.
More features than the original SEM such as Sample and Hold, LFO Square wave, Noise, extra inputs, many more signal modulation options via rotary switches.
Plenty of modulation possibilities
Rugged steel construction.
MIDI In for software sequencer / keyboard control.
LCD to edit MIDI set-up.
No patch memories! You can be original each time you create a sound."

Anyware SEMTex XL Modular Synthesizer

via this auction

more pics here

"the manufacturer's description.

Semtex Modular XL

Both Modular Synthesizers, the XL Model is for starting into the modular world or to add it to a modular system. If you have a modular and do not need LFOs or ENVs the S Version is perfect for you.

Features Semtex XL

semimodular prepatched , so you save a lot of patchcords! MIDI: just patch the back side MIDI jacks to the desired mod destination, there are 6 triggers also for ENVs and stuff..

2 VCOs: + 2 SubOSCs:
- VCO 1:
Sägezahn / Rechteck
+ Sub-Oszillator (Rechteck)
(Saw, Pulse)

- VCO 2:
Wellenformen wie VCO1
+ Sub-Oszillator

- Noise (white)

-Ringmodulation
-Sync
-Osc FM (patchable)

Multimode Filter:
VCF: 12dB/Okt / Multimode
Oberheim-Style.
modulierbare charakteristik lpf-hpf-notch,bpf
CV-spannungssteuerbar!
Der "Morph" steuert den Filter per CV von Tiefpass nach Hochpass! Das ist das besondere und das Plus gegenüber dem SEM, bei dem das "nur" manuell geht

Filter is CV-controlled to morph from lpf to hpf..

2 LFOs:
- incl. S&H, 3 Ranges, very slow to very fast

3 Hüllkurven / Envelopes:
- Env 1: ADSR
- Env 2: ADSR
- Env 3: AD

2 Amp:
- VCA + MCV (Mod VCA)

all patchable all VCO ins, outs are available.
MIIDI Interface built in!

MIDI Features:
* Pitch CV = 1V/Oct or 48 note table.
* Monophonic or Polyphonic 2 to 4 voices.
* Last note priority in mono mode
* 3 CV aux outputs assignable to velocity or any MIDI controller
* 4 Gate outputs assigned to CV output 1 to 4
* 2 Trig/gate outputs assignable to MIDI controllers,MIDI Clock or velocity (Velo trig)
* Mode Re-Trig for all gate outputs
* Midi Clock with clock division by N and Start/Stop control
* Edit all parameters by SysEx MIDI messages
* all parameters buffered in flash ram..
* CV output = 0 - 10V / Gate =0 - 5V
* PC Software to configure the interface by MIDI (no mac so far)
* Soon : Pitch Bend and 16bits emulation to generate very accurate V/Hz scales. just one more resistor and a firmware update needed"

Note the Doepfer jacks in the back.

CLICK FOR MORE »

Anyware Instruments Semtex XL

via this auction

"Anyware Instruments Semtex XL semi modular analog synthesizer"

CLICK FOR MORE »

Anyware Instruments - SEMtex XL Analog Synth & WEM Watkins Copicat Model Super IC Tape Delay

via this auction

"ANYWARE INSTRUMENTS SEMTEX "XL" Desktop SEM Clone. Those box has the Serialnumber #25 and was recently serviced by Anyware itself; thereof it has the last current MIDI Firmware and fixed some small 'Issues'."

Also see the seller's WEM Watkins Copicat Model Super IC Tape Delay listed here.

CLICK FOR MORE »

Anyware Semtex XL

via this auction

Anyware Semtex XL

via this auction

Anyware Instruments InSEQt Sequencer 3

YouTube via tomabeman
"The new Anyware Instruments Sequencer controls the Anyware Instuments Semtex XL Modular and the TMSS/Theis Modular. The upper Sequencer controls the Percussionsound from the Semtex and the Cutoff-Groove at the TMSS/Theis. The Lower Sequencer controls the pitch from the TMSS/Theis. Rythmical groove with the Fm-modulation of the Sequencer-Clock. Transposition via Keyboard in Quantizer. Have fun"

Anyware Instruments InSEQt Sequencer 2

follow-up to this post.

"The new Anyware Instruments Sequencer controls itselve(Seq A modulate Seq B and Seq B modulate Seq A).Noises and Sounds are from the Anyware Instuments Semtex XL Modular and the TMSS/Theis Modular. More experimentel then the other Video. have fun"

Anyware Instruments InSEQt Sequencer

YouTube via tomabeman
"The new Anyware Instruments Sequencer controls the Anyware Instuments Semtex XL Modular and the TMSS/Theis Modular. Seqences like "Berlin School" ;-) Have fun"

Semtex XL

YouTube via pac209. "halfmodular analog synth" Follow-up to this post.
Anyware Instruments Semtex XL, Doepfer MAQ 16/3 Sequencer, Roland TR-909.

The Anyware SEMTex

T sent the following into AH. I asked him if it would be ok to put this up here, and he gave me the thumbs up.

"i have one, love this synth. To me it sounds like an "Oberheim SEM on steroids" ;-). Because it`s a kind of SEM-Clone, but modular. But apart from that, it stands on it´s own. There are some prepatchings, so you cou don`t need too many cables to get it running. The Oscillators are stable, they are like those on the SEM, but with added Suboscillators and it has also Noise and Ringmod. The 2 Main-Envelopes are switchable from slow to ultrafast, these are one of the fastest enevelopes i`ve ever heard. Wonderful for those clicky sounds for cut`s n clicks... There is also a 3rd, simpler ad-env for modulations. The LFOs are very fast and flexible. The Filter sounds great and is 12 db, but it can selfoscillate too, eg to create electropercussion. You can morph between the modes (with modulation input!)...LP, HP, BP, Notch. When i am missing 24 db mode, i am patching it with a moogerfooger filter. this is a bit tricky because you don`t have a dedicated patchpoint for the VCA. Anyware Instruments is a small company, really a one man show, but Tommy, the owner, is a really helpful and nice guy. The Semtex is build solid with hi-quality parts. I have made some demos with the Semtex only, find them here (on the anyware website are a few more):







The Idea for the Semtex was born on the german sequencer-forum sequencer.de ; there you could also ask in english for more detailed infos about semtex xl.

Sorry if this reads like a promotional ad, but it`s one of my absolute favorite mono-synths :))

Best,
T"

Analogue Haven Winter NAMM 2006

If you are forunate enought to go to NAMM this year, this is the booth to check out.

"Analogue Haven will exhibit from January 19th until the 22nd at the NAMM show in Anaheim, California. Our booth is # 1787 which is located in Hall E. For details including a floor layout please visit the NAMM show's website.

The following manufacturers and gear will be presented at our booth:

Doepfer - Dieter Doepfer and Sibille Heller - Super Suitcase with all A-100 modules including new A-188-1a/b BBD delay, A-101-9 Universal Vactrol, Switched Capacitor Filter, Zero-Thru Quadrature VCO, Touch Sensor keyboard, R2m Ribbon Controller, PK88 and LMK Professional Controller Keyboards, D3m with D3c drawbar controller, all OEM/DIY products, midi-cv and midi-sync interfaces, midi controllers and MAQ 16/3 midi/analog sequencer.

EAR Group - Mike Brown and Peter Grenader - Livewire and Plan B modules.

Eowave - Emmanuelle Gallin and Marc Sirguy - Eowave Bugs and Persephone.

Future Retro - Jered Flickinger - Revolution, Mobius, XS Expander.

Manikin Electronic - Thorsten Feuerherdt - Memotron and Schrittmacher.

Metasonix - Eric Barbour - S-1000 Wretch, TM/TX series pedals.

Modcan - Bruce Duncan - Series B system with all modules including new Analog Sequencer 54b and Clock 53b.

MOTM - Paul Schreiber - Frac Rack series modules with demonstrations from Robert Rich.

Vermona & HDB - Thomas Haller and Denny Schreckenbach - all gear including DRM, Perfourmer and Retroverb

Other gear being shown by us include:

Analogue Solutions - Vostok and possibly Concussor drum series.

Anyware Instruments - SemTex XL.

Cwejman - Eurorack module prototypes and possibly S1mk2.

Elektron - possibly Machinedrum UW.

Infection Music - Zeit.

Jomox - M-Resonator.

Macbeth Studio Systems - M5.

Sequentix Music Systems - P3.

* plus additional special guests"