Animodule M1xxor eurorack audio CV mixer sequencer

Published on Feb 10, 2016 Flux302 of Fluxwithit.com

"New Module from Animodule.com
price $199 8 hp, depth 33mm
available now
How It Works:
-Signal goes in to Channel Input (it's DC connected so you can use Audio OR CV).
-Signal is attenuated via Channel Attenuator.
-Signal is allowed to pass through to Individual Channel Output AND Mixer Output IF Gate Input is High OR Switch is depressed.

Sequencer:
-Clock Pulse High in to Clock Input Moves Sequence forward 1 Step.
-The Channel that the step is On will be open*
-CV can be used to control the Sequencer via the CV Input.
-There is a resolution of 5 steps (4 channels and a 0 step allowing for all channels to be cleared from the Sequencer).
-There is an attenuator and offset to help properly scale and position your CV Input.
-CV Input is expecting 0V to +5V, but with the Attenuator and Offset will easily work with -/+5V.
-Clock and CV maybe used in tandem resulting in some mind melting rhythms!
-In that case the Clock will step forward 1 step from it's current position (unless it's on step 4 in which case it will roll over to step 1)
-The Clock used in conjunction with the CV will bitshift the sequence to the left, incrementing the static position of the step counter by 1 (wrapping around to step 1 after step 4).
-Fer' Instance, 2 Clock counts and CV is on 0. Step will be on Channel 2
-Gate High in to Reset will reset Clock counter to step 1 OR if Clock Input is being used in conjunction with the CV Input the reset will clear the Clock Counter and return the step to where the CV indicates it should be without any BitShifting

*Gate Input / Switches in conjunction with Sequencer:
-The Sequencer and the Gate Input / Switches combine in a XOR gate. If one is High and the other is not, that channel will be open. If BOTH are High, that channel will be closed.

Despite the lengthy description, the M1xXOR is very intuitive (and unbelievably Fun!) to use.
Each Channel (and the Mixer) May be used independently of the Sequencer.
So if you're not in the mood for Rhythmic Insanity You still have a gateable 4 Channel DC-Coupled Mixer AND/OR 4 independent and gateable channels of Attenuation."

MOON MODULAR @NAMM16 - meet and greet video re-uploaded

In case you missed it, the video is back up here.

Mogees - Clouds experiment

Published on Feb 10, 2016 Alba Ecstasy

"A short demo of Mogees via Clouds. I used percutions from Interpol808 and the Granular mode of Clouds.
More on www.albaecstasy.ro"

KORG MONO/POLY Synthesizer Serviced

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Everything works as specified, overhauled before shipping to have long life and to keep original sounds.
Change all electrolytic capacitors and voltage regulators, some short life OpAmps and logis ICs with new ones,
and keys knobs, sliders, switches and jacks cleaning before shipping."

CLICK FOR MORE »

KORG PolySix SN 386334 w/ Orig Green Case

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Arp 2600 with 3604P Keyboard

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"This one has the more sought after Moog filter. Also 8 years ago it had extensive work done by a professional vintage synth technician. The power supply was reworked maybe even replaced as I can't remember, A few of the boards had there epoxy coating removed. Beneficial should potential service need to be done . All semi internally routed patches were tested and repaired,Some jacks were replaced with Switchcraft equivalents. Since then, it has lived in a home studio environment and has been solid working.

Known issues; the right speaker does not work, however when you patch this MONO synthesizers audio out to both the Left and Right output jacks, It's mono signal does flow through like it should. You may want to calibrate if you see fit.

All patching points are 1/8th/3.5mm and this will easily plug into today's common Euroracks as well as computer based systems. No need for adapters unless your using 1/4" or banana jacks."

CLICK FOR MORE »

DWNR

DWNR from John Durbin on Vimeo.

"more experimentation"

Modular Synth - Patch in Progress 25

Published on Feb 10, 2016 isvisible / isinvisible

"Working on another track.
Featuring:

ALM - Pamela's Workout
WMD - PDO, TBVCA
Folktek - Matter
Music Thing - Turing Machine
Livewire AFG
Mutable Instruments - Elements, Grids
Some filters, delays etc"

PreenFM assembly

Published on Feb 10, 2016 VanDaalElectronics

"PreenFM assembly. Music made with PreenFM and Van Daal Electronics Filter.
DIY kits and assembled units are available here: http://vandaal-electronics.com/shop/"

Kilpatrick Audio Phenol and Buchla Music Easel Together

Published on Feb 9, 2016 Vintage Synthesizer Museum

"This was my second day with the Phenol, and just felt like making a video. Sorry if it's a long-winded.
Cross Patching Notes:
-Square Wave of Easel's Modulation Oscillator into Sync in of Oscillator 1 on Phenol
-Oscillator 2 of Phenol into Timbre modulation input of Easel's Complex Oscillator (Osc. 2 is also going through the Adder at maximum positive voltage)
-Easel Pulser output into Gate in of Envelope 2 of Phenol"