Thursday, February 02, 2017
Acidhouse Disco Oriental crossover with Electribe, Volca FM, 303, MB33, Mopho etc
Published on Feb 2, 2017 Shimanski Beats
"After experimenting with a few sounds I made for the Volca FM I ended up with a dulcimer patch and some oriental tune which I combined with two 303-acidlines and some disco-foundations, and hence got to an Acidhouse-Disco-Oriental crossover. Hope you like it!
Gear in this track:
Cyclone Bassbot TT 303: acid line 1
MAM MB33 retro: acid line 2
DSI Mopho: Bass
Volca FM: oriental dulcimer-like sound (at times: played live with Electribe pads)
Waldorf Streichfett: strings (played live with Electribe pads)
Waldorf Blofeld: additional sequence sound
Korg Electribe Sampler 2: Drums, percussion, wah guitar; sequencing the other synths
Effects: Lexicon MX 200 (delay on aux send); TC Electronic M-One XL: reverb on aux send; TC Electronic M-350 (delay+reverb on aux send), TC- Alter Ego X4 Vintage Echo & TC Dark Matter distortion on TT 303)"
Taide'n Borg - Long journey to Cygnet XIV
Published on Feb 2, 2017 Sun's May Flower (Official)
Update: new HQ version uploaded.
Equipment:
Bass: Roland JX-10
Polysynth: Roland JX-10
Synth Solo: Korg Monopoly
Strings: ARP Solina String Ensemble
LFO - Ufo: Roland Juno 60
Drum: Alesis HR 16 (Strellis Eprom)
Drum: Akai S900
Effects:
Chorus (Synth) - Boss CH1
Panner - T.C. Electronic M*One
Reverb: Lexicon LXP15
Reverb: Roland SRV-2000
Delay: Analog Delay - EEM 2000 ST
Delay: Digitech Studio 400
0-Coast Patch of the Week #6: Arcade Trills
Published on Feb 2, 2017 MAKEN0ISE
"From the 0-Coast manual: http://makenoisemusic.com/content/man..."
All parts in the series here.
Chris-Cook - First Recording in New Studio w/ an ARP Quadra, Odyssey, Axxe & OMNI 2
Published on Feb 2, 2017 Chris-Cook
Can you recognize the track?
All ARP synths & Roland CR-78 for drums. Check out the custom white OMNI 2 at the end. KORG Micro Preset in there as well.
ToyTone Synthesizer Demo - Free IOS Toy Synthesizer
Published on Feb 2, 2017 Synth Anatomy
iTunes: ToyTone - Itoh Tomoaki
"ToyTone is simple synthesizer!
Usage
- Select waveform, and move the slider.
- Tap the pad at bottom, you can play.
iPhone/iPodTouch only (In iPad, please use +/- buttons.)
- When you tap the label to the left of slider, the value is reduced by one.
- When you tap the label to the right of slider, the value is increased one.
New features
- Support recording with Inter-App Audio host app.
enjoy!"
A lost Italo Disco Project
Published on Feb 1, 2017 SynthMania
"Recreating an old Italo Disco demo that I recorded years ago with Bit 99 and LinnDrum"
diminishred ~ knatterton
Published on Feb 1, 2017 Ebotronix
4ms Peg, QCD/Expander², QPLFO, RCD², VCA Matrix
Analogue Systems RS 100², RS 110²², RS 360²
Bananalogue Serge VCS
Cyndusries Zeroscillator
Doepfer R2 m² , A101-2², A118, A131², A133², A134²², A141,
A143-1,2,9, A148, A149, A151²², A152, A156²,A166, A171,
A175²²², A185-2(14x), A138m,a²²b²²c²²²
Flame 4 Vox, Chord Machine, Q Slider², Tame Machine
foh choices
Grendel Formant Filter²
Make Noise Brains ,PP², Maths², Moddemix²²,
Optomix, QMMG, RenĂ©, Wogglebug²
Malekko Anti ²², Unkle²², Jag
Moog Taurus 2, Freqbox²², MP 201
Oberheim Sem
Roland SVC 350 Vocoder / Shure SM 58
SSL Modulation Orgy
Tiptop Audio Z 8000
Toppobrillo Quantimator² (diminishred),Sportmodulator
Kenton Pro 2000
FX:Alesis Philtre, Boss Ef 303, RV 5, VF-1, BSS DPR 402,
Lexicon MPX 100² , MX 400, PCM 80/90, Line 6 Echopro
mackie the mixer³
drums Clavia D Drum4 se
vid #1675
GumpherDM3 Arduino Based DIY Hardware Chiptune Synth
Uploaded on Jan 19, 2017 GumpherDM3
"This is a MIDI capable Arduino controlled monophonic semi-modular analog synthesizer. It has 4 VCOs (2 Audio, one Sub-audio and one hybrid that switches between either), a 4-pole low pass filter, a Voltage Controlled Amplifier (VCA) and two envelope generators (AR1 and AR2). It also has an arpeggiator built in to add some videogame-esque sounds. My awesome wife printed out the decals using the Silhouette Cameo and transferred them onto the wooden control panel with a layer of Modpodge to make it scratch resistant. I never really sat down to figure out how many octaves it can work with before the tuning goes bonkers, but it appears to handle six octaves pretty well.
I hope you enjoy the video. I had a really great time learning about this stuff and actually getting to build a working synth.
Tech Stuff: The VCOs, LPF and VCA cores are all built around the LM13700 OTA using mostly datasheet schematics with component values adjusted to work on +-9V supply. Also, since the synth uses the LM13700 for all VCOs and VCF, all exponential current sources use PNP transistors. I added in my own design for input CV signal mixing to the modules and output signal normalizers (to produce both CV and audio signals). I attempted to design my own CV generator using the Arduino and while it works more-or-less, I learned first hand about the challenges with using the PWM analog signals produced by the micro-controller as CV signals for the synth modules. I don't think I would do anything differently in this project, but next time I'll use a 16-bit DAC for analog CV signal generation rather than the Arduino."
Spotted this one over on Ask.Audio where you'll find some additional words from creator Guenther.
LABELS/MORE:
Chiptune,
DIY,
New,
New DIY,
New DIY in 2017,
New in 2017,
New Makers,
New Makers in 2017,
New Synths,
new synths in 2017
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH