MATRIXSYNTH


Saturday, September 16, 2017

PO-20 + PO-28 slow jam


Published on Sep 16, 2017 chisel316

"Playing around with the PO-20 and PO-28 pocket operators while sending the mixer output into the Roland GO:MIXER which is plugged into my Samsung S5 which is mounted to my chest using a chest mount by Velocity Clip. At the end of the video I give a quick tour of my current setup. Stay tuned for more.

Peace \/
chisel316"

Stripped Roland System 700 Modular Synth - 703A Multimode Filter module Minus Faceplate

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"This is an used original circuit board, frame and front sub-panel from a 703A multimode filter module for a Roland System 700 analog modular synth. I don't know if it works or if the boards are complete (they appear to be - see photos). The jacks, sliders, LEDs and mode selector switch are present. I have no way of testing it.

The panel has been unsoldered from the circuit board but I found a photo of how it should be re-soldered here:

http://yusynth.net/gear/ROLAND/M700/VCF2-guts.jpg
http://yusynth.net/gear/R700_MC_en.html

No knobs, front panel or other parts are included - *only* what is shown in the photos."

Korg Wavestation EX


Published on Sep 16, 2017 100 Things I Do

"What do you do when you want a Prophet VS but the prices make your eyes water? A partial answer is the Korg Wavestation EX, It contains the Waves from the Prophet VS. Dave Smith and John Bowen worked on it and it can do those super chilled 90's digital synth pads.

Remember I said it was a partial answer (no pun intended), the cutoff filter is more like a tone control and there is no resonance. With some careful programming you can get very close to these features by mixing in the included resonance waves. If this is a deal killer Korg addressed most of this problem with the Wavestation Plugin which has been kept up to date an runs on most 64bit platforms.

A lot of people say this synth is very hard to program. I found once you get your head into how the sounds are put together its quite easy to come up with custom and unique sounds. I was able to create full custom patches within a hour or two of owning the synth. It can stray very far away from its 90's roots and at the current prices they sell for make a very nice addition to any studio, even onboard effects are nice and you can easily use them in a mix."

AKAI S1000 9/16/2017


Published on Sep 16, 2017 SynthMania

"Patches from one floppy disk on the AKAI S1000 sampler"

Korg MS2000B Patches


Published on Sep 16, 2017 Dark Window Recs

"A few short demonstrations of some Korg MS2000B patches designed and recorded by Dark Window Recs."

Korg MS2000B patches 02

Published on Nov 12, 2017 Dark Window Recs

"The 2nd Korg MS2000b patch demonstration by Dark Window Recs.
All patches and sounds created by Dark Window Recs."

Control Synthesizers & Electronic Devices Live Stream w/ Make Noise


Started streaming 1 hour ago Control Synthesizers & Electronic Devices

"Location & Hours:
416 Lorimer St #1R Brooklyn, NY 11206
Open Everyday 12PM-8PM

www.ctrl-mod.com

About:
Control is a synthesizer brick & mortar shop located in the South Williamsburg Neighborhood of Brooklyn, NY.

We specialize in Eurorack Modular, vintage traditional and unusual eccentric electronic devices both analog and digital. Please do not hesitate to get in touch."

Toxic - Live Mix / Digitakt, Moog Mother 32, Roland TR8, Waldorf 2 Pole


Published on Sep 16, 2017 Kapuzal

"Kleiner Studio Umbau, Live Session Training, Waldorf Schülerin (in vieler Hinsicht) Danke Fröbel
Little Studio Change:
Live Mix "Toxic"
#Stubenmusi #MusicDontStop #Waldorf #Electro #Moog #KorgVolcaBass #NordLead #RolandTR8 #WiesngehörtdazubeachtetmandasOutfit"

Prophet 12 - Custom Patches 51 to 75 - geosynths.com


Published on Sep 16, 2017 GEOSynths

"Some further patches that i have made for the Prophet 12, which really is turning out to be one of my favourite Synths. I'm really liking the FM capabilities and not for the usual Bass sounds, but listen to patch number "66 - The FerryMan"...Great gurgling Pad :) Just 24 more to go and they will be released at www.geosynths.com"

All parts here.

Buchla CVT Twenty-Two & Twenty-Three


Published on Sep 16, 2017 Todd Barton

Buchla CVT

Update:

Buchla CVT Twenty-Three

Published on Sep 16, 2017

ENSONIQ MIRAGE VINTAGE DIGITAL SAMPLER SYNTHESIZER

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

PREVIOUS PAGE NEXT PAGE HOME


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH