MATRIXSYNTH

Dreadbox NYX Analog Paraphonic Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

Rhythm Box TS-2000 70's Vintage Drum Machine Test

Published on May 23, 2018 SUBTOKYOSHOP

"Rhythm Box TS-2000 70's Vintage Drum Machine Test

recorded with drawmer lx-20 compressor"

subtokyoshop on eBay | subtokyoshop on Reverb

Note: eBay and Reverblinks are affiliate links for which the site may be compensated.

NI Synergy XT Synthesizer

Published on May 23, 2018 GentleElk

"I continuing create this stuff..."

Obviously inspired by the Clavia Nord Leads.

Transposing Sequences

Published on May 23, 2018 MAKEN0ISE

"Transposition of a sequence in the world of voltage control is nothing more than adding a voltage offset to the sequence voltage. This can be done with addition, in other words summing, in other words mixing, as in a MATHS, but if your VCO has a dedicated Exponential FM input then you don’t even need a mixer."

its 555 eurorack 1

Published on May 23, 2018 cirtcele

"This module turns any incoming signal into a series of 5 pulses. Each pulse can be inverted or positive and have its amplitude set. the Pulse width can be controlled by CV. A different kind of resonator.

Each has CV and pot controlled pulse width and the pulse for each can be set to be negative going or positive at any desired amplitude. The circuit is supposed to be driven by a signal from a VCO, but noise or chaos sorces are fun too. It creates five pulses that can be individually manipulated to create a complex and harmonically rich waveform. A slower clock signal will give clicks and glitches (so, a voltage controlled glitch module).
As the pulse widths can be individually controlled (or controlled en masse by “CV all”), this waveform can be continually morphed to get new sounds. When the 5 pulses are quite thin the effect is that of a resonator. The controls allow a wide pulse width, so fatter, thicker sounds can also be created.

PCB = USD20
Panel = USD24
assembled = USD230

More info : http://nonlinearcircuits.blogspot.com..."

Super-JX PWM Multitrack

Published on May 23, 2018 Joakim Floke

"In this track I only used my MKS-70 for sounds except for drums.
It's been modified with Vecovens PWM-boards and flashmodule.
The sounds here are almost all based on PWM. No EQ has been used and just some reverb was added on some parts. Hope you like it and if you have any questions, just ask them."

Winter Modular - Eloquencer FIRST PATCH

Published on May 23, 2018 DivKidVideo

"I'll have more in depth coverage coming with Future Music Magazine on their YouTube channel and in the magazine itself very soon but I just wanted to share my 'first patch' here with you all. It's a fairly simple 6 part drum sequence and entirely randomly generated synth line. We've got ratchets, probability over gates, probability over ratchets, shuffle, quantization. It's really quick to get some more comprehensive parts together, which is always a nice surprise with the bigger more complex sequencers."

Roland SH01A & Strymon Timeline

Published on May 23, 2018 3rdStoreyChemist

"Sequence on the SH01A synthesiser through the Timeline reverb.

No further processing except normalisation."

FH-2 prototype - Euclidean patterns

Published on May 23, 2018 Expert Sleepers

ladik C-410, S-143, F-510, D-333, O-111, S-180, S-182, M134 & E-480 countour generator

Published on May 23, 2018 RuprechtM

www.ladik.eu
C-410 clock source
S-143 seq modulates VCF F-510
D-333 makes kick (triggered by C-410 divided output)
O-111 VCO controlled by S-180+S182
M-134 mixer
A-310 headphones amp
patch without VCA or ENV

ladik E-480 countour generator

Published on May 23, 2018 RuprechtM