MATRIXSYNTH


Sunday, August 19, 2018

Sinusoids


Published on Aug 19, 2018 Chaotic Morphs

"My first tune with my Buchla 208 diy. There are some crosstalk and leakage in the module yet but I hope to solve that. Mono recording direct from the module to the camera. No processing"

RH Electronics Synth Noir - Modular Update


Published on Jul 18, 2018 RH Electronics

All finished so far, still modules and things to build.
The synth has
MIDI to CV
VCO
VCF
VCA
2x ADSR
and the 16 step sequencer

RH Electronics 5 Voice analog synthesizer - Major update


Published on Aug 18, 2018 RH Electronics

"It works! Well one voice does on breadboard.
Up and running are 2 oscillators (CEM3340 based, but using AS3340)
These go to a 4066 switch then the waveforms are mixed, so you can switch on all of them on both oscillators.

The oscillator is based on the Prophet 5 circuit, the voice chip is a CEM3372, which was £35 but worth it, as it has everything, 2 inputs voltage controlled mixer, a low pass filter with cutoff/resonance and a VCA

Then an envelope generator to control the filter and amp (test just the amp)

So one full voice will need
2x oscillators
1x Signal processor
2x Envelope generators
1x CV mixer for the envelope and cutoff (filter only) and LFO CV

Microcontroller will feed SPI DACs that will be the voice and control CVs, but then all the voice circuits are analog."

Sub Phatty - The Basics Demonstration


Published on Aug 19, 2018 SYNTHWAY

"This is a complete demonstration of the basic functions of the Sub Phatty, going thru oscillators, filter, envelopes and LFO. There's no exploring of hidden panel functions (which I'll approach in a later video).

I know this is a long one, but I've always wanted to show the Sub Phatty and its synthesis components."

Arduino Clock Divider Logic Thing Review (for modular synthesizers)


Published on Aug 19, 2018 Sbranvlztronics

"A description of the Arduino Clock Divider Logic Thing module functionality. This module is a clock divider using an ATmega328 microcontroller, a bunch of shift registers, transistors and opamps. The 20 HP panel is made of plastic, behind it there are be four pcbs to accommodate the circuits (all hand drawn and using only thru-hole components...). The divider section has 8 outputs, with division ratios defined in software (1, 2, 3, 4, 5, 6, 7, 8 or whatever wanted). There is a logic section with another 8 outputs, the logic gates and divisions configuration being selected by a potentiometer and a switch (64 configurations, or algorithms). Also one AND and one XOR patcheable gates sharing two inputs, a random trigger output, and a MIDI output. The software can be modified using a FTDI connection on the front panel. The clock can be internal (controlled by a pot) or external, or can be controlled by any external continuous CV (there is an attenuation/inverter pot and an offset pot for this CV), the conditioned CV has its output on panel. And of course a lot of LEDs...
The circuits involved will be shown in another video.

Thanks for watching.

Sbranvlztronics"

APP JAM - Patterns and Spaces - Spacecraft Patterning Animoog and more


Published on Aug 19, 2018 redskylullaby

"App Jam made entirely on iPad featuring SpaceCraft by DeltaV Audio, Patterning 2 by Olympia Noise Co, iSymphonic by Crudebyte, Animoog by Moog Music Inc, Ravenscroft 275 Piano by UVI Touch, iFretless Bass by Blue Mangoo, Tardigrain by Humbletune Erik Sigth, Auria Pro by WaveMachine Labs
Effect Plug Ins used: Fabfilter Saturn ProQ 2, Pro R, and Pro C 2, Crystalline by Holderness Media and PSP Old Timer"

Grayce (Decay Study II)


Published on Aug 19, 2018 UncertainMusicCorps

"Dual Looping Delay combines with Wotja to generate continuously evolving melodic ambience.

The DLD is clocked via midi despite the manual advising against external clocking (as the internal one is far more accurate). But, in this case, the occasional clock glitch generates some lovely random grace notes on the delay tails. The rewards of uncertainty...

Lead voice is from Shapeshifter. Bass voice is Warps and Braids layered.

Recorded live direct to the camera.

Info about Wotja here https://intermorphic.com/wotja/

A more extended, audio only take of the same system is here

https://soundcloud.com/umcorps/grayce-ii"

Buchla Morning Improv


Published on Aug 19, 2018 Jens Paldam

"An Improvisation on the Buchla Music Easel CK Recorded in the morning of Friday the 17th of August 2018.

My Easel is made up of a Roman Filippov 208 Clone, a BEMI 223e an Electric Dompteur Model hED, a Voltage Circus Model hVC and CV Polymorpher 20C lent generously to me by Northern Lights Modular. Such an amazing supplement to the Easel!!!"

Pattern Patterns Patterns - A Selection of Cirklon Patterns for Eurorack and G2 Synthesiser


Published on Aug 19, 2018 Luke Killen

"I've done nothing but smash out Cirklon patterns for the last three weeks since i got back from Canada. Here's a small selection of them strung together. I'll be playing this kind of material for a show in Sydney next week."

Buchla Easel ,Soma Lyra-8 and Op-1 livingroom jams


Published on Aug 18, 2018 therudyrude

"Improvs with the Buchla Easel, the Soma Lyra-8 and the OP-1"
PREVIOUS PAGE NEXT PAGE HOME


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH