E-MU EMAX SE Sampling Synthesizer (1986) *Hearts Of Iron* SynthWave

Published on Jul 2, 2019 RetroSound

"(c) 2019 vintage synthesizer demo track by RetroSound

all synthesizer sounds: E-MU #Emax SE #Sampling #Synthesizer (1986)
drums: LinnDrum (1982)
recording: multi-track without MIDI, played by hand
fx: reverb and delay

I used some factory samples and I sampled my own synths for this track."

Circuit Bent Fire Truck

Note: Auction links are affiliate links for which the site may be compensated.
Published on Jun 20, 2019 Psychiceyeclix

"Circuit bent Toy Truck, start up your engine & blast out some trucking beats!!
Voltage starve bend will cut the sounds down to blips & chirps."

via this auction

"Circuit bent by Psychiceyeclix - Circuit bent Toy Truck, start up your engine & blast out some trucking beats!!
Voltage starve bend will cut the sounds down to blips & chirps.

Controls -
Voltage starve control,
jack socket
speaker still connected"

CLICK FOR MORE »

Roland PR-800 Digital Piano Recorder SN 362979 w/ Original Box

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Yamaha DX7 with Two TX7 Modules

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Other accessories included:
- Roland Damper Pedal
- Yamaha Expression Pedal
- 5 Midi Cables
- Original Sound-bank Cassettes for the TX7"

SNs 51442, 4207, 17152

CLICK FOR MORE »

Attacus Atlas | Monomachine, Machinedrum, Analog4, Bigsky

Published on Jul 2, 2019 buromaschinen

Some synths and drum machines

Published on Jul 2, 2019 Hawkinsnikwah

"Haven't used the Drumtraks in a while....."

Hawkinsnikwah

Alesis A6 Andromeda SN 9431800457 / 94318 00457

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Oberheim Cyclone MIDI Arpeggiator

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"The Oberheim Cyclone is a MIDI arpeggiator
- MIDI clock and "Tapped Tempo"
- 16 ROM and 16 RAM programs
- up to three arpeggios simultaneously
- Arpeggiated patterns can cloned, transposed, repeated and inverted
This rare Oberheim Cyclone MIDI arpeggiator, this is one of, if not the most advanced hardware arpeggiator ever produced. It interfaces with midi gear to create complex interactive musical patterns, it can be used as a master clock device, or slave to drum machines or a DAW
Very VERY hard to find. This was just serviced (July 2, 2019). It has a brand new battery/clip and a new logic supply regulator."

CLICK FOR MORE »

Midi Mapping in VCV Rack 1.0

Published on Jul 2, 2019 Omri Cohen

"One would think that the new Midi mapping feature in VCV Rack 1.0 will start and end with using an external controller and mapping it to different parameters in VCV Rack, but oh boy, this is just the beginning. Midi mapping opens a whole new world of modulation and patching that was not available before. Yes, sure, you can now map your controller to almost anything in VCV, even if it has no CV input, but you can also modulate almost anything with other modules as well, even if what you want to modulate has no CV input, and you can also record and create automation and unique modulations, and again, assign them to almost anything in VCV. So in this video, I start with mapping an external controller, and then I use the Stoermelder modules that allow us to use Midi mapping to map other modules as well.

If you like what I do and want to support my work, consider joining my crew on Patreon - https://www.patreon.com/omricohen

Mapping an external controller - 00:57
Mapping modules and creating automation - 10:13

Here is the final patch - https://patchstorage.com/midi-mapping...
You can find the patch from the opening sequence and a couple of extra patches on my Patron page - https://www.patreon.com/posts/28083143
Here you can find the Stoermelder modules - https://vcvrack.com/plugins.html#packone"

VCV Rack Videos by Omri Cohen

The following are four of Omri Cohen's playlists covering VCV Rack. There is quite a bit here, so you might want to bookmark this post. Some of the videos have been featured here on MATRIXSYNTH in the past, but there are quite a few new ones. I thought it would be useful to have one post with all of them. Note I will be putting up new posts for future videos as well, so you don't miss them, but this will serve as a master post. P.S. You can find Omri Cohen on Patreon here: https://www.patreon.com/omricohen.


VCV Rack


"In this playlist, you can find various videos about different modules in VCV Rack."

VCV Rack Techniques


"This playlist is dedicated to the videos I made about different techniques in VCV Rack like, creating certain sounds, adding movement, composition tips and tricks, and more."

VCV Rack Live Streams


VCV Rack - Braids Synthesis Models Series


"This Playlist is dedicated to the videos of the Braids Series. Every now and then I build patches using only Braids (Macro Oscillator) by Mutable Instruments, in a specific mode, as a sound source."