ondes Martenot + EHX Hot Tubes (+ BOSS RV5)

Published on Jul 5, 2019 Josh Semans

"Experiments with my ondes Martenot and the EHX Hot Tubes pedal, as well as the BOSS RV5. Part of an ongoing series of videos pairing the ondes Martenot with various effects pedals and sound processors.

joshsemans.com"

Josh Semans ondes Martenot videos

Onde Magnetique OM-1 Cassette Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Onde Magnétique OM-1
Modified Sony cassette player
Wall adapter
Two 3.5mm TS patch cables (for connecting OM-1 to modified cassette player)
Pink Flute/Vox Cassette Tape
Green Feedback/Worn Out Cassette Tape
Pitch Ribbon + 3.5mm TRS cable
Manufacturer Box

CLICK FOR MORE »

Yamaha AN1X Control Synthesizer Analog Physical Modeling Synth

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Virtual analog synth with some unique models including FM.

CLICK FOR MORE »

KORG Polysix Vintage Polyphonic Analogue Synthesiser SN 461395

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Roland JD-800 Synthesizer SN ZC55502

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Oberheim OB-XA SN U06570230

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"The OB-Xa was released in December 1980, a year after the OB-X was released. Instead of discrete circuits for oscillators and filters, the OB-Xa (and the Oberheim synths to follow) switched to Curtis integrated circuits. This made the inside of the synth less cluttered, facilitating troubleshooting, and reducing the cost of manufacture. It was getting more difficult to service the OB-Xa due to the scarcity of Curtis chips; however, Curtis started re-manufacturing some of these chips in June 2016,[3] which has breathed new life into the longevity of the OB-Xa and many other synthesizers that use these chips. There are a couple of knobs missing but everything works really well and it sounds like a dream." DE10457

CLICK FOR MORE »

Electronic Music Laboratories Electrocomp EML-101

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"All functions work great and has new keyboard bushings. Missing handle strap and has a little chip in the right lower part of enclosure (see pic)
This synth sounds enormous due to 4 oscilltor layout, ring modulator is also very sweet."

CLICK FOR MORE »

Soma Lyra-8 and Eventide H9

Published on Jul 5, 2019 therudyrude

"Floating around with the Lyra-8 with a bit of Eventide H9 reverb"

Emu Ultra Sampler - Demo #10

Published on Jul 5, 2019 St0neOfficialChannel
Update: Re-Published on Jul 6, 2019

"All presets I made on Emu E4XT Ultra. After the recording was used lightweight compression and nothing else. Please use 360p or higher for better sound quality."

02- The ARP Pro DGX- Part 2: Presets 1

Published on Jul 5, 2019 AutomaticGainsay

"Here is part one of a three-part demonstration of the sounds of the various presets found on the ARP Pro DGX synthesizer."

ARP Pro DGX AutomaticGainsay videos