Sunday, December 29, 2019
20191230 iPad SE02 SNAPPER 7FUJIOKA CustomSound
Published on Dec 29, 2019 ryouichi harada
"今回はArturia のiSEMというオーバハイムのアプリ使いました。
シーケンスとソロはSE02です。
来年もまたみてください＾＾
Thank you!"
Two Samplers One Drum - Elektron Digitakt, Volka Sample and Sansamp Flyrig
Published on Dec 29, 2019 Mauricio Maisterrena
"The Volca is doing almost al the rythm section and is going through the flyrig for some overdrive, the Digitakt is sequencing everything and doing all the melodies."
Some free style playing at 1:53.
Crumar Bit One MIDI Upgrade demo
Published on Dec 29, 2019 Harry Axten
"This is a modification I developed for the Crumar Bit One, a fairly rare Italian-made polysynth from the mid 1980's, that improves its MIDI capability. The upgrade takes the form of a small daughterboard that installs neatly inside the synth. More information can be found at https://hkadesign.org.uk/bitonemidi.html"
SEQUENTIAL CIRCUITS PRO-ONE SN 2850
ROLAND TB-303 Computer-Controlled Bassline
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"This 303 was Meticulously serviced by professionals (us) and in perfect working order, unlike most. Note the plastic battery compartment cover release had a crack in it and was glued and taped. It works fine."
via this auction
"This 303 was Meticulously serviced by professionals (us) and in perfect working order, unlike most. Note the plastic battery compartment cover release had a crack in it and was glued and taped. It works fine."
ELECTRO-HARMONIX MINI-SYNTHESIZER EH0400
ARP PRO/DGX Model 2733
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Meticulously overhauled over a whopping 32 hours (!). They usually don't take us this long, but this one had a tricky problem in the digital oscillator section that required a lot of time to sort out. In addition to performing this and any other repairs, we did the following work to this unit:
Touch sensor was replaced with a new one and adjusted. These are usually not working at this point in time.
Power supply capacitors replaced to extend life.
Keyboard rebuilt: replaced bushings, cleaned key contacts and removed and cleaned/polished bus bars.
Removed, adjusted, cleaned, lubed and reinstalled all slide pots.
Cleaned and lubed all switches.
Adjusted tuning.
Cleaned inside and out.
Thanks to all the time, love and money we invested in this unit, it is now working like new again, is totally ready to play, and will hopefully continue to work for a very long time, which makes it a much better purchase than others of its type on the market."
via this auction
"Meticulously overhauled over a whopping 32 hours (!). They usually don't take us this long, but this one had a tricky problem in the digital oscillator section that required a lot of time to sort out. In addition to performing this and any other repairs, we did the following work to this unit:Touch sensor was replaced with a new one and adjusted. These are usually not working at this point in time.
Power supply capacitors replaced to extend life.
Keyboard rebuilt: replaced bushings, cleaned key contacts and removed and cleaned/polished bus bars.
Removed, adjusted, cleaned, lubed and reinstalled all slide pots.
Cleaned and lubed all switches.
Adjusted tuning.
Cleaned inside and out.
Thanks to all the time, love and money we invested in this unit, it is now working like new again, is totally ready to play, and will hopefully continue to work for a very long time, which makes it a much better purchase than others of its type on the market."
CES Ed-Lab 703a Digital Systems Lab
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"These units were produced for educational purposes but as you can see they are easily integrated in to a banana cable modular synth set up (eg Buchla, Serge, Modcan A, Phenol, Fenix, Bugbrand, Lorre Mill, Ciat Lombard etc)
It's a collection of various logic, digital and simple AD/DA circuits with a few analog sections and a HEX input key pad.
I've seen them advertised as "Analog Computers" which of course they are not, but I can see why some folk might think so.
I intended to use this with my Serge system but never got around to it and now I need the space.
The high/low switch for the digital clock speed needs replacing."
via this auction
"These units were produced for educational purposes but as you can see they are easily integrated in to a banana cable modular synth set up (eg Buchla, Serge, Modcan A, Phenol, Fenix, Bugbrand, Lorre Mill, Ciat Lombard etc)
It's a collection of various logic, digital and simple AD/DA circuits with a few analog sections and a HEX input key pad.
I've seen them advertised as "Analog Computers" which of course they are not, but I can see why some folk might think so.
I intended to use this with my Serge system but never got around to it and now I need the space.
The high/low switch for the digital clock speed needs replacing."
2 Vintage CASIO PT-7 Portable Mini Electronic Music Synthesizers
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"One works perfect and is in wonderful cosmetic shape. The other one powers up, plays the rhythm section but the keyboard doesn’t work. So one works perfect and the other is for parts. The parts one is missing the battery cover."
via this auction
"One works perfect and is in wonderful cosmetic shape. The other one powers up, plays the rhythm section but the keyboard doesn’t work. So one works perfect and the other is for parts. The parts one is missing the battery cover."
TAMA Techstar TS204 Analog Drum Synthesizer w/ Hand Clap SN 201075
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"This is a cool rack unit that can be triggered via pad or a trigger pulse from something like the Arturia Beatstep Pro or Behringer RD-8 drum machine. I have used both to trigger it as well as Simmons pads. The hand clap can't be tweaked much, but it's nice and clappy. The Synth on the other hand is bonkers. It has a longer release than any other Techstar drum sound. I have one of the bigger 6 channel Techstar units as well and this one is the longest. It has an LFO which no other Techstar sound has either."
via this auction
"This is a cool rack unit that can be triggered via pad or a trigger pulse from something like the Arturia Beatstep Pro or Behringer RD-8 drum machine. I have used both to trigger it as well as Simmons pads. The hand clap can't be tweaked much, but it's nice and clappy. The Synth on the other hand is bonkers. It has a longer release than any other Techstar drum sound. I have one of the bigger 6 channel Techstar units as well and this one is the longest. It has an LFO which no other Techstar sound has either."
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
