Roland Jupiter-8

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"This is an early 12 bit unit, pre DCB, serial number xxx949...

Diagnostics and repair performed by Jareth Lackey of Synthpro Restorations, LLC.

Service included repair of an oscillator that wouldn’t track, a wave shape circuit repair, replacement of two op amps, five interface buttons, oscillator sync switch , one broken key, and the save battery which was recently replaced on a separate trip to Synthpro.

Recently gone through, every function works as they should, and the factory presets were restored due to the battery replacement

The bottom of E4 key is chipped, shown in pictures, and the pulse width modulation slider wiggles loose, also shown in pictures. The slider must be stabilized when using. Despite this, it has a smooth reaction, and is not a wiper or carbon track issue but a broken actuator. It works as it should otherwise.

CLICK FOR MORE »

Roland SH-201 Keyboard Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Moog Minitaur Analogue Bass Synth

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

A Little Aeros Loop Studio Demo

Red Means Recording

"The Aeros Loop Studio by Singular Sound is a fun, capable multitrack looper with one of the best UIs I've ever experienced on a hardware device. Here's a video showing off how it works with the Teenage Engineering OP-1."

S-CAT Analogue Bass-Drum

Space Cat Audio Technologies

"Testing the controls on the new Analogue Bass Drum. The TR-606 is playing the drum via tom trigger output. First Batch of Circuit board currently on order."

Waldorf Microwave XT demo

Panu Savolainen

"I found old single-shot Microwave XT demofiles from 2001 and added some old studio pictures when I still had XT. Everything is coming from Microwave. No sound layering done."

Jupiter Clone - Sound Demo 2

tiergrinder

"Some Fat analog sounds from my home brew Jupiter 8 'inspired' synthesizer.

My friend Timo from Supercritical Synthesizers took the JP Clone for a test drive. if you like synthesizers and hardware, check out their website and youtube channel. They make really cool and awesome sounding gear :)

http://supercriticalsynthesizers.com/
https://www.youtube.com/channel/UCI8356speG70sNPMCbdHoOg

ps. Don't mind the wobbly keybed. I did some last minute tuning before Timo started to play and in all the excitement I forgot to secure the screws :D

Serge Modular - Suspense Atmosphere

PaulLawlerMusic

ARA-Serpens Modular/Anima and Altar Filter -Ritual Electronics

Dziam Bass

"Hello all.
The last two modules I have opened are the new ARA- sequential switch from Serpens Modular and Anima from Ritual Electronics.
I recorded a small patch with these modules when ARA is as a sequencer and Anima has dual digital VCO and EG and LFO, but I only used one VCO and the other I used envelope.
from another module I added lfo for decay and curves changes so from time to time they change in motion. I added Altar filter also from Ritual which adds character to Anima.
I added Drums from Pico Drums triggered via Pico TRIGG from Erica Synths.
I recommend checking these Serpens and Ritual modules because they give you a lot of possibilities and have great performance.
for me it is a lot of fun but also a lot of possibilities which I discover every time I exceed my thoughts on this module and come out great new sounds and sequences which normally I would not put together without the input of these modules when they go further than I can consciously do.
Thanks for ur time and watching and have a GREAT MODULAR day."

MSK 007 Leapfrog Filter-North Coast Synthesis/ Primary Oscillator -Pittsburgh Modular/Quadigy-Klavis

Dziam Bass

"Hi All.
I took Leapfrog Filter MSK 007 from North Coast Synthesis again this morning for fun with FM, I also added MSK 008 VC Octave Switch and I used the Lifeforms Primary Oscillator from Pittsburgh Modular Synthesizers and attached an interesting module from Klavis this Quad Programmable Envelope Generator for this morphing envelopes therefore they are once shorter and longer set the sequences in a small motion , Leapfrog with Primary VCO they give me a really nice sound but I also like adding FM in the filter, I added Timbres to exponential FM so I wanted to share this sound in this short video.
let me know what you think about this sound, it seems quite smooth but also with a great character that hits my head.
sorry for my tripod, my dog walked a lot today during the recording ;-)"