Roland SYSTEM-100M Model 121 Dual VCF SN 820692

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Moog Voyager Select Series White Ash & Red Model

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Sequential Circuits Pro One J-Wire SN 2239

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Pic of the j-wire keyboard below.

CLICK FOR MORE »

Korg DW-6000 w/ Cassette Tapes

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"The Korg DW-6000 is a six note polyphonic hybrid synthesizer with two single-cycle digital waveform oscillators and one analogue lowpass filter per voice. As basic material, eight digital wave cycle waveforms were available to the user through a system Korg called DWGS for Digital Waveform Generator System. The DWGS system can be thought of as an early sample playback system where only extremely short, single cycle waveforms are stored on four 256 Kilobit ROM chips, played back through the two digital oscillators and processed by relatively familiar subtractive synthesis facilities. Edit the patch is a typical method for selecting the parameter with a single data slider to increase or decrease the value.

This synth is in very good condition and comes with two Korg tapes."

CLICK FOR MORE »

DETUNERS // Juno-106, Korg Prologue, System-8, TR-808

video by MR TUNA Music

"A MouthCam™ experience!
Some warm and wavy sounds from the Roland Juno-106 and a screamin' lead from the System-8.
Recorded October 2018 in the TUNADOME

See my other stuff: https://linktr.ee/mrtuna​​ ⬅️⬅️⬅️✨✨✨

GEAR USED:
Roland Juno-106
Roland System-8
Roland JX-8P
Korg Prologue
Roland TR-8 x2
Roland MX-1 x3
Squarp Pyramid
GoPro Hero 7 Black

INQUIRES:
trumanproudfoot ( @ ) gmail.com"

What does it mean to RECAP old gear? | Yamaha TX816 in need of help

video by Espen Kraft

"I recently found out that my Yamaha TX816 had bulging capacitors in the power supply. I was a little pressed for time so Anders Jensen stepped in and offered to do it for me. Thanks buddy!

So he shot the complete job and I shot a couple of clips and presto; here is a nice little video for anyone interested in what it takes to actually replace all the capacitors in a power supply. Necessary evil if you want to keep your precious electronics free from harm and enjoy your synths for another 30 years.
Now I "only" have to recap all the different boards as well, but those aren't as critical as the power supply as a bad power rail there can easily fry everything down the line."

Korg SQ-64 Overview and Demo

video by sonicstate

"Korg’s first Sequencer since the SQ-1 - which came out the same time as the MS-20 mini and was a simple 8 step analog affair. The SQ-64 is an altogether different beast.
It appears to take it's inspiration from the 3 melodic tracks and a drum track, like Beatstep and Keystep Pro from Arturia, but the way it addresses them is different.


#soniclab​ #korg​ #sq64​
00:00​ overview
02:53​ Demo Sequence
03:40​ Tracks and MIDI
05:05​ Gate probability and ratchet
06:50​ More track parameters
08:06​ Slides and ratchet types
09:59​ Chords, Poly and Arp mode
13:06​ Pattern gotchas
14:39​ Global settings
16:19​ Loop mode
19:33​ Pattern switching and chaining
21:49​ Controller Mode
22:45​ Summary and Price
25:15​ Outro playout"

RYK Modular - M185 Sequencer

video by SchneidersLaden

"The RYK M185 Sequencer rethinks the concept of 8-step sequencers by adding different options for how every single stage behaves – it can be handled to program ratcheting, short or long gates, pauses or repeats and the like. So, allowing each step to be repeated by up to 8 times and additionally defining how this repetition will be executed, really opened up the initial concept of a simple 8-step sequencer. Each step can perform 8 unique gate modes for creative rhythmic possibilities: off, one gate on first repetition, gate on every second/third/forth repetition, probability, tied gate. If you set the sequence length to 16 or 32 for example, you can fill these steps with unique patterns in no time.

With the addition of A/B split mode for two separate sequences and implementing MIDI I/O the concept of this sequencer was taken even further. Especially its MIDI capabilities qualify this module to be used with all kinds of synthesizers in your studio, not only your modular.

This video shows you example sequences made with the M185 and some parts show you the process of programming simple to complex sequences. This is a very hands-on module with great potential for creating new ideas quickly and it seems to be ideal for live performances with a tendency to improvisation."

You can find additional M185 posts here.

Korg P3 80's Piano Module + Roland RE-301 Chorus Echo Session

video by SUBTOKYOSHOP

"Korg P3 80's Piano Module + Roland RE-301 Chorus Echo Session

Session with
Korg P3 Piano Module
Roland RE-301 Chorus Echo
Yamaha RX21 Digital Rhythm Programmer
Ableton Push"

subtokyoshop on eBay | subtokyoshop on Reverb

Note the above links are affiliate links. See the site's privacy policy

CB55 analog drum machine, 16HP eurorack build

video by Jon Petter Skagmo

CB55 is a DR55 clone pcb from circuitbenders.co.uk. You can find addtional posts featuring the CB55 here.

This one was built by http://skagmo.com

"CB55 analog drum machine (16 HP)

This one is popular to mount in Eurorack. I started off trying to make a 28 HP module, but i didn't see the needs for all the modifications/pots I planned, and I thought the module was too large, so I started over and made a narrow (16 HP) MIDI enabled module.
Based on the Circuitbenders CB55 analog drum machine PCB
Cut off the entire trigger conditioning circuit and drilled new mounting holes to allow the PCB to be placed vertically behind a Eurorack panel.
Designed a MIDI and sequencer addon with a PIC18, with a switch on the front panel to start/select predefined sequences, and a DIN-5 for MIDI in. This PCB also has the voltage regulators and power connector, as that was chopped off together with the trigger conditioning circuit.
In addition to the standard volume, tone and accent pots, there are individual volume pots and jack outputs for each of the voices.
Panel was milled from the rear side because I needed to machine some pockets for some protuding tabs on the potmeters, and then flipped over to do the engraving."