Monday, August 02, 2021
OP-1 Deep Dive #2 | Pulse synth engine
video upload by Oblivion Corner
"The Pulse synth on the Teenage Engineering OP-1 synthesizer is described as being a "dual pulsetrain oscillator". This OP1 synth engine works primarily by allowing you to change the distance between the two pulses that form the oscillator. Additionally, a one knob filter, amplitude and modulation control round out the sound shaping options available on this OP-1 synth engine.
#op1 #synth #teenageengineering
Contents:
00:00 Intro
00:20 OP-1 Pulse Filter (blue)
00:52 OP-1 Pulse Amplitude (green)
01:44 OP-1 Second Pulse control (white)
02:50 OP-1 Pulse Modulation (orange)
04:00 Fave OP1 Pulse synth sounds
If you'd like to support this channel with a one-off purchase, please check out our affordably priced music: https://synthandsundry.bandcamp.com
Oblivion Corner OP-1 Deep Dive posts
Buchla 288r Multi Audio Processing
video upload by Todd Barton
"A look and listen to processing the tap outs of the 288r through different audio processors: Spectral, Ring and Frequency Shift. Also a big shout out to Kyle at Source of Uncertainty podcasts and Patreon for an excellent, don't miss deep dive into the 288r. If you have the module or are contemplating getting one you have to watch his video! Source of Uncertainty Podcasts:
https://sourceofuncertainty.audio/pag...
Source of Uncertainty Patreon:
https://www.patreon.com/sourceofuncer...
My Patreon:
https://www.patreon.com/synthtodd"
DIY Eurorack Case Part 2: Power Supply
video upload by Extralife
Extralife DIY Eurorack Case posts
"In this video I finally finish up wiring my reclaimed wood eurorack style synth case. I show how to install a basic switchmode power supply using a busboard, Meanwell RT-50B, some wire, and a few connectors. Supplies used are listed below:
16" eurorack bus-board by Jacob Barss-Bailey: https://www.tindie.com/products/jbars...
Meanwell RT-65B swithmode power supply: https://www.jameco.com/z/RT-65B-MEAN-...
Switched power entry module with fuse and EMI filter: https://www.jameco.com/webapp/wcs/sto...
Power entry fuse: https://www.jameco.com/z/TSC-5A-Jamec...
Quick disconnect crimp-on terminal: https://www.jameco.com/webapp/wcs/sto...
Faston solderable disconnect tabs: https://www.jameco.com/webapp/wcs/sto...
Screw-in hex standoffs: https://www.jameco.com/webapp/wcs/sto..."
Five Filtered-Noise Patches
video upload by John L Rice
"WARNING: TURN YOUR VOLUME DOWN!
Sorry, I think this video turned out a little louder than I intended it to be, it was a rush job for fun!
Index:
0:00 Beginning
0:20 Ultrasound Cat
2:30 Caterpillar
3:51 Ten Pound Termites
6:00 Heavy Breather Cat
7:03 Crazy Cat And The Modular Couple
10:37 End
All patches used at least the noise from the Mos-Lab 923 Filters and Noise module and the Club Of The Knobs C914B Fixed Filter Bank.
As always, thank you for watching, rating, following, and commenting! 🥳
Please consider "buying me a coffee" if you found this content helpful or entertaining: https://www.buymeacoffee.com/JohnLRice"
Roland Jupiter 8 w/ Kenton Midi Kit & Flight Case SN 030117
Note: Auction links are affiliate links for which the site may be compensated.
via SYNTH CITY Reverb
Note auction links are affiliate links. See the site's privacy policy for more info.
"This Jupiter 8 is in great working condition and was just serviced and calibrated.
New Kenton midi kit freshly installed, pro job by our in-house tech. However, the previous owner attempted the midi mod and hacked out the rear panel in the process (hence the large metal plate and missing ROLAND logo). DCB port has also been removed.
Cosmetically the synth is in very good condition despite the rear panel. The keys are in great shape and are very white. All buttons are functioning fine and it sounds incredible as usual!
Includes original manual and flight case."
Kenton Midi Mod info further below.
via SYNTH CITY Reverb
Note auction links are affiliate links. See the site's privacy policy for more info.
"This Jupiter 8 is in great working condition and was just serviced and calibrated.
New Kenton midi kit freshly installed, pro job by our in-house tech. However, the previous owner attempted the midi mod and hacked out the rear panel in the process (hence the large metal plate and missing ROLAND logo). DCB port has also been removed.
Cosmetically the synth is in very good condition despite the rear panel. The keys are in great shape and are very white. All buttons are functioning fine and it sounds incredible as usual!
Includes original manual and flight case."
Kenton Midi Mod info further below.
Erica Synths SYNTRX w/ Docs
Moog Minitaur w/ 12 Step, Pedaltrain Jr and case
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Super compact and show-ready Moog Minitaur rig. Includes the following:
Moog Minitaur
Keith McMillan 12 Step MIDI controller
Keith McMillan MIDI host
Pedaltrain Jr board and soft case
Power supply and cables for 9V pedals or other gear"
Like a compact Moog Taurus, mini bass pedal synth.
via this auction
"Super compact and show-ready Moog Minitaur rig. Includes the following:
Moog Minitaur
Keith McMillan 12 Step MIDI controller
Keith McMillan MIDI host
Pedaltrain Jr board and soft case
Power supply and cables for 9V pedals or other gear"
Like a compact Moog Taurus, mini bass pedal synth.
Sequential Circuits Prophet 600 w/ GliGli Mod
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"The synth has recently serviced with new battery, numeric membrane panel, and recapped power supply and voice card. Excellent working condition and only a few marks as shown. It has the GliGli upgrade and also have kept the original chip just in case you want to swap it back. The synth has been factory reset with the original patches loaded."
via this auction
"The synth has recently serviced with new battery, numeric membrane panel, and recapped power supply and voice card. Excellent working condition and only a few marks as shown. It has the GliGli upgrade and also have kept the original chip just in case you want to swap it back. The synth has been factory reset with the original patches loaded."
Crumar Bit99 61-Key Programmable Polyphonic Analog Synthesizer
Note: Auction links are affiliate links for which the site may be compensated.
via this auction, also on Reverb
"Black Crumar Bit-99 with a lovely lovely filter sound. All works as it should. The right panel looks like it took a hit at some point, and a key was replaced along the way (see pictures). The exterior is aged but looks pretty good as it’s not a gloss black finish.
Upper and Lower functionality works great, although Upper channel is louder. This may be able to be adjusted by internal trimpots."
via this auction, also on Reverb
"Black Crumar Bit-99 with a lovely lovely filter sound. All works as it should. The right panel looks like it took a hit at some point, and a key was replaced along the way (see pictures). The exterior is aged but looks pretty good as it’s not a gloss black finish.
Upper and Lower functionality works great, although Upper channel is louder. This may be able to be adjusted by internal trimpots."
SOMA The Pipe Dynamic FX Processor
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
You can find posts featuring SOMA The Pipe here.
via this auction
You can find posts featuring SOMA The Pipe here.
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH