MATRIXSYNTH


Thursday, November 25, 2021

Playing with the Buchla 222e/223e


video upload by

"Braids going in Verbos Bark filter piged by Northern Lights Modular 2TT, Kick from Braids (DAO) Grayscale. Solo synth by complex Oscillator 261e .Percussion sequenced by the 251e."

Hydrasynth Deluxe multi patch: Seq Strings RA


video upload by the sun god RA

"'Strings d’Air RA' orchestral strings and 'Spark 2600 RA' arp3600/1601/drums sequence. The latter patch is in 'Mono Lo' mode, allowing the bass arpeggio sequence to be played by the lowest note on the keyboard."

Roland Alpha Juno-1 BOSS RE-20 Space Echo Trip Analog Synthesizer Rik Marston


video upload by Rik Marston Official

"The Roland Alpha Juno-1 running thru the BOSS RE-20 Space Echo!
No tutorials here, just open testing of the FX on the RE-20 for fun today!
The BOSS RE-20 is a modern remake of the classic Roland Space Echo
RE-201! This FX pedal can make some DEEP drones & soundscapes!
Both units ROCK. What an awesome pair! All sounds are custom patches.
I have my Seymchan Pallasite meteorite sitting on the Alpha Juno-1,
it is sending you **Positive Cosmic Vibes**!
My NEW Ambient Electronic album "Into The Earth" coming December 2021!
*Please Support Rik Marston Official!
My NEW Etsy store: **AhnyxianSoundDesign** UP NOW
selling Synthesizer Sample Packs for hardware & software samplers!
https://www.etsy.com/shop/AhnyxianSou..."

PPG wave 2.3 custom ambient sounds


video upload by synthlegends

"PPG wave 2.3 through my GFI clockwork delay pedal. I made some custom ambient sounds to show some untypical sides of the PPG. You have almost 2000 waves there and there is no need only to use wavetables running through an envelope. It also can be interesting just programm a pad sound with a long filter sweep and some modulation using very musical and beautiful waveforms. For string sounds for example there is wavetable 41 very ususful Thanks for watching and enjoing the video."

Oberheim Matrix-12 | T-Rex of Analog Superpowers


video upload by Espen Kraft

"The last big analog poly synth of the 80s, the Oberheim Matrix-12. Incredibly powerful and flexible. It can sound big, full, small, raw, polished and crazy. All at once."

Sequential Take 5 Sound Demo (no talking)


video upload by Bonedo Synthesizers

Sequential Prophet 10 - Stack Mode Demo


video upload by Default Corporation

"Hi, I've made two patches from scratch on my Sequential Prophet 10 and after i activate the stack mode. I think this is a big feature that worths to have 10 voice instead of 5 on new Prophets Rev4. Thanks for watch!!!"

Roland Animation NFTs

TB303 from Arthr on Vimeo.

Part of an evolving collection, 'A Journey Through Synths'.
Full story & background: https://www.arthr.net/post/tb303

"Similar to all the other animations in this series, the sounds are recorded from the original unit that’s visually featured. I wanted the sound of the 303 to be unmistakable, so tracked the full rasp and squelch of the unit. The cutoff frequency and resonance parameters were gradually increased over the duration of the audio, so you really get to hear the sound open up. In 3D I built a small controller with rotary encoder type knobs that would operate the corresponding controls on the 303. Arthr then hovers over the knobs and strikes them with lightning to keep them energised and moving! To control Arthr’s back and forth motion and the on/off button for the lightning, I used a joystick reminiscent of the old Atari CX40 that would control all of this motion."

TR808 from Arthr on Vimeo.

Part of an evolving collection, 'A Journey Through Synths'.
Full story & background: https://www.arthr.net/post/tr808

"As it’s been such an important part of my musical passage, ’A Journey Through Synths’ had to include the SH101. As with all the animations in this series, the sounds are recorded/sampled from the original unit that’s visually featured. The style of the main lead line you hear appears in most of my productions with the cutoff frequency and square wave mix parameters being modified.

To maintain an accurate sync between the audio with what’s happening visually, I built a little slide controller in 3D that would control the corresponding controls on the 3D SH101. To sync these with accuracy I matched the FX envelopes in Ableton to the timeline in 3D. Arthr also plays out the arrangement of notes on the keyboard, so each key was animated in line with the audio timeline. Next to the parameter controls, I thought it might also be fun to have a live recording device setup with a visual waveform to capture Arthr’s live performance as it happens."

SH101 from Arthr on Vimeo.

Part of an evolving collection, 'A Journey Through Synths'.
Full story & background: https://www.arthr.net/post/sh101

"The animation for the 808 started with figuring out which components on the machine would be interactive. In order to emphasise the punchy, sharp transients of the drums, the only way to represent this was for Arthr to jump and land on every step switch with precision to make that solid audiovisual connection. As the drum pattern extends across the entire front of the machine, getting Arthr back to the beginning to start his loop again proved challenging. Experiments with backflips, cartwheels and other martial arts moves all looked a bit forced and artificial. The solution came after reminiscing with my nan about the time we broke one of the claw machines at the arcade and so the controlled claw came to mind. The Atari CX40 inspired joystick with a button to activate the claw grip seemed like a nice way to get him back to the start, whilst also giving a nod to another iconic piece of hardware from a bygone era."

TR909 from Arthr on Vimeo.

Part of an evolving collection, 'A Journey Through Synths'.
Full story & background: https://www.arthr.net/arthr-blog

"For the 909 I wanted to increase the level of detail in the scene. I really enjoyed the waveform feedback built into the SH101 animation, so constructed a device Arthr could operate that would include this. The industrial looking machine lets Arthr tap out the kick drum sequence in the track with a gavel/hammer like apparatus. Other little details included are the ever-spinning clock, accurate BPM display and the beat pulsing cables."

via https://www.arthr.net/arthr-blog

The History of the miniKORG


video upload by Alex Ball

"A mini documentary telling the story of Korg's first synthesizer.

0:00 Background 2:19 The miniKORG 700
5:25 Impact
6:13 Legacy and the 700FS

All incidental music composed with the miniKORG 700FS."

AFX4 -CALC- Novation AFX Station (Bass Station 2) Performance with Elektron Machine Drum


video upload by -CALC-

"This is the performance I worked on for the release of the Novation AFX Station. It's also included as part of the presentation I gave when the synth was released on Novation's YouTube channel.

This was a lot of fun to work on and was a bit of a pressure gig (releasing a signature synth collaboration with one of my all-time musical heroes). I spent a lot of time practicing to get it right.

The performance makes a lot of use of the AFX mode in the Bass/AFX Station with a nice smattering of microtunings too. It was also a lot of fun to break out the masterpiece that is the Elektron Machine Drum again too..... The MD was my first ever stand alone device, it broke me out of the box and changed my life for evermore... I will never let it go."
PREVIOUS PAGE NEXT PAGE HOME


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH