New Products 2/18/2015 Published on Feb 19, 2015 Adafruit Industries
"DSP-G1 Voice Chip (0:21) https://www.adafruit.com/products/2400
Adafruit Audio FX Mini Sound Board - WAV/OGG Trigger 16MB Flash (2:45) https://www.adafruit.com/products/2341
Adafruit Audio FX Mini Sound Board - WAV/OGG Trigger - 2MB Flash (2:45) https://www.adafruit.com/products/2342
Adafruit Raspberry Pi A+ Case - Smoke Base w/ Clear Top (5:08) https://www.adafruit.com/products/2359
HDMI 4 Pi: 7" Display & Audio 1024x600 w/Touchscreen (9:45) https://www.adafruit.com/products/2397
HDMI 4 Pi: 7" Display w/Touchscreen 1024x600 w/ Mini Driver (9:45) https://www.adafruit.com/products/2396
HDMI 4 Pi: 7" Display w/Touchscreen 1024x600- HDMI/VGA/NTSC/PAL (9:45) https://www.adafruit.com/products/2395
-----------------------------------------
Visit the Adafruit shop online - http://www.adafruit.com"
via Adafruit
"Make your own mini MIDI synth with DSP-G1 Voice Chip analog modeling synthesizer by Jan Ostman at DSP Synthesizers. It's a tiny LPC810 chip programmed to read in MIDI streams and make music!
The chip reads TTL level serial MIDI data and outputs sound through a 44.1KHz Delta-Sigma DAC. The synth is a 15-DCO structured as 5-note paraphonic with a 24db lowpass filter with resonance. It also has: AMP ENV, filter ENV and LFO with sine or sample & hold waveform.If you want to use it with for example Arduino (as we did in our example photo), it can be connected to the ATmega TX port and controlled through a sketch. More chips makes it multitimbral
15 DCO, 24db DCF, 2 ENV, 1 LFO
5 voice paraphonic voice structure
TTL MIDI Input
44.1KHz 16-bit Delta-Sigma DAC
19 parameters controlled through MIDI-CC
3.3v power, 5v tolerant inputs
MIDI-CC list:
CUTOFF = CC#74
RESONANCE = CC#71
FILTER A = CC#82
FILTER D = CC#83
FILTER S = CC#28
FILTER R = CC#29
FILTER ENV M = CC#81
FILTER LFO M = CC#01
WAVEFORM = CC#76
WRAP = CC#04
RANGE = CC#21
DETUNE = CC#93
OSCENV A = CC#73
OSCENV D = CC#75
OSCENV S = CC#31
OSCENV R = CC#72
MASTERVOL = CC#07
LFORATE = CC#16
LFOWAVE = CC#20"
No comments:
Post a Comment
Note: comments that insult people will be removed. Critique on gear is allowed. Do not ask if listings are still available. Click through auction links to check yourself. Posts and pics remain for historical purposes. To reduce spam, comments for posts older than one week are not displayed until approved (usually same day).