Friday, October 14, 2016
Patch Notes #23 - Quad Turing Machine Mode in Ornament & Crime
Published on Oct 14, 2016 Voltage Control Lab
"Testing the deeper functions in Quantermain mode in Ornament & Crime, the quad turing machine mode to be precise! This is an extremely useful and exciting module.
A clock coming from Make Noise Tempi, which is sequencing the 0-Coast. The 0-Coast is routed to the Mutable Instruments Warps for some delay through the Parasites alt firmware, and on to the Malekko Mix4.
Tempi is also clocking the Malekko Varigate 4. One channel is triggering the Slope section in the 0-Coast, which is not modulating the 0-Coast, but rather shaping the kick drum routing inside the Roland Scooper which is also routed on to the Mix4.
Another channel on the Varigate is routed to trigger the Noise Engineering Basimilus Iteritas. All 4 channels on the Ornament & Crime are modulating functions on the BI: pitch, decay, morph and fold. All 4 channels are triggered by Tempi at the TR1 input.
Make Noise René is also receiving clock from Tempi, sending it's QCV out to the DPO, and Xgate out to the Malekko ADLFO. The DPO final out is sent to the Optomix, and then out from the mix output to the Mix4. One channel on the ADLFO is routed to the Optomix channel to open LPG, another is controlling FM depth between the oscillators on the DPO.
The Roland System 1m is played live via the Qunexus keyboard, routed out through the Aux input on the Optomix.