Anyware SEMTex XL Modular Synthesizer

via this auction

more pics here

"the manufacturer's description.

Semtex Modular XL

Both Modular Synthesizers, the XL Model is for starting into the modular world or to add it to a modular system. If you have a modular and do not need LFOs or ENVs the S Version is perfect for you.

Features Semtex XL

semimodular prepatched , so you save a lot of patchcords! MIDI: just patch the back side MIDI jacks to the desired mod destination, there are 6 triggers also for ENVs and stuff..

2 VCOs: + 2 SubOSCs:
- VCO 1:
Sägezahn / Rechteck
+ Sub-Oszillator (Rechteck)
(Saw, Pulse)

- VCO 2:
Wellenformen wie VCO1
+ Sub-Oszillator

- Noise (white)

-Ringmodulation
-Sync
-Osc FM (patchable)

Multimode Filter:
VCF: 12dB/Okt / Multimode
Oberheim-Style.
modulierbare charakteristik lpf-hpf-notch,bpf
CV-spannungssteuerbar!
Der "Morph" steuert den Filter per CV von Tiefpass nach Hochpass! Das ist das besondere und das Plus gegenüber dem SEM, bei dem das "nur" manuell geht

Filter is CV-controlled to morph from lpf to hpf..

2 LFOs:
- incl. S&H, 3 Ranges, very slow to very fast

3 Hüllkurven / Envelopes:
- Env 1: ADSR
- Env 2: ADSR
- Env 3: AD

2 Amp:
- VCA + MCV (Mod VCA)

all patchable all VCO ins, outs are available.
MIIDI Interface built in!

MIDI Features:
* Pitch CV = 1V/Oct or 48 note table.
* Monophonic or Polyphonic 2 to 4 voices.
* Last note priority in mono mode
* 3 CV aux outputs assignable to velocity or any MIDI controller
* 4 Gate outputs assigned to CV output 1 to 4
* 2 Trig/gate outputs assignable to MIDI controllers,MIDI Clock or velocity (Velo trig)
* Mode Re-Trig for all gate outputs
* Midi Clock with clock division by N and Start/Stop control
* Edit all parameters by SysEx MIDI messages
* all parameters buffered in flash ram..
* CV output = 0 - 10V / Gate =0 - 5V
* PC Software to configure the interface by MIDI (no mac so far)
* Soon : Pitch Bend and 16bits emulation to generate very accurate V/Hz scales. just one more resistor and a firmware update needed"

Note the Doepfer jacks in the back.