32SXQ9M1A 32 Channel Analog Sequencer 16/32 Switchable

Published on Mar 25, 2013 pieruixmaster·28 videos

"This 32 Channel Analog Sequencer "32SXQ9M1A". Switchable between Two 16 Channel (in sync) or the full 32 channel sequence. 1 to 32 channel sequence.

Each banks of 16 channels has their own separate CV and Portamento Outputs, (all output jacks are 1/4 inch Switchcraft). The "32/Mix" switch will allow you to use the dual 16 channel banks at the "Mix" CV/Output or switch to 32 position to have all channels present at the "Mix" output jack.

"Pitch" control will allow you to bring the Voltage up or down slightly (at the same time) for both banks.

Each channel has a 3 position switch, in the "Up" position, that channel is on, when set to the "Center" that channel is "Off", when you set a channel switch in the "Down" position that will tell the sequencer to "Reset" when it reaches that channel. If more then 1 switch is in the "Down" position the sequencer will use the 1st "Down" switch it scans too, and resets.

There is a "Start" push button that will allow you to Start or Stop the sequencer anywhere between channels."