via this auction
"THIS SALE IS FOR A VERY RARE INNOVEX HAMMOND CONDOR RSM WIND INSTRUMENT SYNTHESIZER. THIS WAS MADE IN THE 1970s, BUT STILL USED TODAY BY SOME INNOVATIVE ARTIST'S.I DO NOT KNOW WHAT THIS UNIT ORIGINALLY CAME WITH, SO I CAN'T SAY IT'S COMPLETE. BUT, I WILL LIST THE ITEMS INCLUDED WITH THIS SALE.
THE "CONDOR" RSM UNIT. THIS IS A SELF CONTAINED LOCKING UNIT THAT COMES WITH 2 ORIGINAL KEYS.
OPERATING INSTRUCTIONS.
3 MODIFIED MOUTHPIECES - TRUMPET, CLARINET, & SAXOPHONE. THESE HAVE ALL BEEN MADE TO ACCEPT A SMALL MICROPHONE IN ORDER TO PLAY THROUGH THIS UNIT.
THERE ARE 3 MICROPHONES, SHURE BROTHERS CA20B's, WHICH WERE NOT SOLD TO SHURE DEALERS, ONLY TO HAMMOND FOR THIS UNIT.
HERE'S SOME MORE INFO ON THESE MICS & THIS SYNTH:
The CA20B was manufactured by Shure from 1968 to 1970. The CA20B had a ceramic transducer element with an output level of -73 dB V at 94 dB SPL / One Pascal. It was sold only to the Innovex division of the Hammond Organ Company. The CA20B was not sold to Shure dealers.
The CA20B attached to the mouthpiece of a wind instrument, like a trumpet, clarinet, or sax. A hole was drilled into the side of the mouthpiece. A brass adapter, with an internal rubber O-ring, was threaded into this hole. The CA20B then threaded into this adapter. The unbalanced, high impedance output signal from the CA20B was carried on a 60" cable terminated in a tip/sleeve 1/8" phone plug. The phone plug connected to the Condor RSM Wind Instrument Synthesizer, made by Innovex. The Condor was based on the electronics of the Hammond orgran and could produce a variety of sounds and effects using the wind instrument as the trigger source. Examples of settings on the Condor: Bass Sax, Fuzz, Cello, Oboe, Tremolo, Vibrato, Bassoon, etc. If the player wanted to use the instrument acoustically, the CA20B would be unthreaded from the adapter and replaced by a brass cap that sealed the side hole in the mouthpiece.
The Condor was not a success and Shure made few of the CA20B. Some players continued to use the CA20B as a horn pick up, connecting it to the input of a guitar amp. Other model numbers associated with the CA20B were CA20, CA20A, RD7458, and 98A132B.
THERE ARE ALSO 2 COVERS FOR THE MICROPHONE HOLES ON THE MOUTHPIECES. THEY ARE INTER-CHANGEABLE.
AND 2 SMALL PADDED ENVELOPES TO HOLD YOUR ACCESSORIES.
AS FAR AS TESTING, I ONLY KNOW THAT IT POWERS ON, AS YOU CAN SEE FROM MY PICS. I ALSO GOT A LITTLE REVERB WHEN ATTACHED TO AN EXTERNAL AMP.
THIS IS NOT AN AMPLIFIER! ONE IS REQUIRED TO MAKE THIS FUNCTIONAL."
No comments:
Post a Comment
Note: To reduce spam, comments for posts older than one week are not displayed until approved (usually same day).