Friday, February 08, 2013
"MAESTRO" - SOVIET SYNTHESIZER
Published on Feb 8, 2013 dergach11·8 videos
"Tribute to the Formanta Radio Factory in Kachkanar, USSR."
CMOS beat box triggers In Line Effects Drumfire synth
Published on Feb 8, 2013
"hex schmitt trigger based beat box triggers 2 channels on the In - Line Effects Drumfire synth."
"hex schmitt trigger based beat box triggers 2 channels on the In - Line Effects Drumfire synth."
Standuino microGranny - pocket-sized handmade granular sampler
microGranny - pocket-sized handmade granular sampler from standuino on Vimeo.
"Standuino microGranny is pocket sized handmade granular sampler. It uses microSD card to store samples. You can adjust many parameters of the samples and trigger them by MIDI.
more info: http://www.standuino.eu/devices/instruments/microgranny/
buy: http://www.standuino.eu/buy/buy-fraangelico/
Features:
-basic parameters of sound: pitch, crush, volume, start, cut, repeat
-micro sampling parameters of sound: shift speed, loop length, shift direction (forward,backward,random1,random2)
-lfo parameters of sound: rate, amount, destination (pitch, crush)
-instant loop feature
-micro SD card slot (plays monophonic wav samples)
-8 presets (15 sounds each)
-MIDI input (MIDI through by special connector)
-intuitive interface
-3 digit 7-segment display to keep track of editing
-2 pots to tweak the parameters
-mode switching buttons
-4 perfect response trigger buttons
-hold button
-3.5mm jack output
-volume trim-pot
-size: 11 x 7 x 4 cm
-input voltage 9-12 V"
RITM-2 - RARE VINTAGE SOVIET ANALOG SYNTHESIZER
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
Control panel parameter translation below.
via this auction
Control panel parameter translation below.
Pamelas Syncrones
Published on Feb 8, 2013 maertsemil·22 videos
"Pamelas Workout, Syncrodyne, MakeNoise, Maths,WMD, GeigerCounter, Intellijel, Korgasmatron, Doepfer, A199, SpringReverb, Modular, Cylonix, Cyclebox, Modular, FM, Synthesis, ZorlonCannon, Wogglebug, PistonHonda, Harvestman"
"Pamelas Workout, Syncrodyne, MakeNoise, Maths,WMD, GeigerCounter, Intellijel, Korgasmatron, Doepfer, A199, SpringReverb, Modular, Cylonix, Cyclebox, Modular, FM, Synthesis, ZorlonCannon, Wogglebug, PistonHonda, Harvestman"
AMSynth AM8109 Jupiter-8 VCF
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"AM8109 JP8 VCF Summary
This module is replication of the Low Pass Filter from the legendary Roland Jupiter 8 and 4.
This is a 2 and 4 pole OTA design that Roland first used in the Jupiter 4 in 1980, replacing a discrete version of the filter which took up more PCB space.
This is a warm sounding filter with smooth frequency control and a resonance that gradually increases up to full self oscillation, a sound very reminiscent of the early 1980's. The difference between 2 and 4-pole modes is not dramatic, with the 2-pole mode providing a more gradual cutoff slope and silky sound.
EuroRack Module: 14HP wide
Detailed Description
This module is an accurate reprodution of the Jupiter 8 low pass voltage controlled filter, using the original IR3109 OTA chip in the filter core. The design has been updated to use modern components (such as OTA capacitors and high quality Op Amps). It delivers a very warm and smooth sound.
There are front panel controls for adjusting the Cutoff Frequency and Resonance as well as the level of 2x control voltages and 3x audio signal inputs. Resonance is smooth and controllableto self-oscillation.
There are six 3.5mm jack sockets on the right of the front panel;
•Audio Signal output
•2x control voltages
•3x audio inputs.
The slope of the filter can be switched between 2 and 4 poles using a small red push button, and a red LED with lens shows the filter slope selected."
via this auction
"AM8109 JP8 VCF Summary
This module is replication of the Low Pass Filter from the legendary Roland Jupiter 8 and 4.
This is a 2 and 4 pole OTA design that Roland first used in the Jupiter 4 in 1980, replacing a discrete version of the filter which took up more PCB space.
This is a warm sounding filter with smooth frequency control and a resonance that gradually increases up to full self oscillation, a sound very reminiscent of the early 1980's. The difference between 2 and 4-pole modes is not dramatic, with the 2-pole mode providing a more gradual cutoff slope and silky sound.
EuroRack Module: 14HP wide
Detailed Description
This module is an accurate reprodution of the Jupiter 8 low pass voltage controlled filter, using the original IR3109 OTA chip in the filter core. The design has been updated to use modern components (such as OTA capacitors and high quality Op Amps). It delivers a very warm and smooth sound.
There are front panel controls for adjusting the Cutoff Frequency and Resonance as well as the level of 2x control voltages and 3x audio signal inputs. Resonance is smooth and controllableto self-oscillation.
There are six 3.5mm jack sockets on the right of the front panel;
•Audio Signal output
•2x control voltages
•3x audio inputs.
The slope of the filter can be switched between 2 and 4 poles using a small red push button, and a red LED with lens shows the filter slope selected."
Roland GR-300 Polyphonic Guitar Synthesizer with Original Box
Division 6 Filatre SEIII Multimode Filter Module
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
See Perfect Circuit Audio (RSS) for more.
"The Filtare SEIII is a multimode, state-variable voltage-controlled filter that gives you low-pass, band-pass and high-pass outputs which are all simultaneously available. It also includes a notch output which allows you to change the balance between low-pass and high-pass. The SEIII uses discrete components but is based on SSM2040 architechture, giving you a very musical sounding filter. There are CV inputs for frequency, resonance and notch balance. The 1 V/O CV input for frequency can be used to have the VCF follow what you're playing on the keyboard or just crank up the resonance and use it to play sine-waves."
via this auction
See Perfect Circuit Audio (RSS) for more.
"The Filtare SEIII is a multimode, state-variable voltage-controlled filter that gives you low-pass, band-pass and high-pass outputs which are all simultaneously available. It also includes a notch output which allows you to change the balance between low-pass and high-pass. The SEIII uses discrete components but is based on SSM2040 architechture, giving you a very musical sounding filter. There are CV inputs for frequency, resonance and notch balance. The 1 V/O CV input for frequency can be used to have the VCF follow what you're playing on the keyboard or just crank up the resonance and use it to play sine-waves."
Vermona DRM1 MKIII Analog Drum Synthesizer
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
See Perfect Circuit Audio (RSS) for more.
"The DRM1 MKIII is an analogue drum synthesizer.
It offers eight instruments, each with seven knobs for forming the sound plus a panorama- and a volume-controller. The user interface is absolutely clear and intutitve - one knob, one function.
The instruments on the DRM1 MKII are as following:
KICK : Mainly but not only for making big and fat kick drums.
DRUM1/DRUM2 : Very flexible instruments that can generate kick- and tom sounds a s well as bongos. Anything from zapp to bling and fantastic PIUU...
MULTI : Three oscillators can be detuned and gives you nice cowbell-like sounds. If you like submarines you can create a nice sonar ping.
SNARE : What can we say about that? Well, you get what you expect.
Hi Hat1 and Hi Hat2 : That's analogue (heavy- or soft-) metal.
CLAP : Classic analogue hand claps.
The instruments of the DRM1 MKIII can be triggered by MIDI (of course velocity-sensitive). There is also an optional trigger option avilable that connects the drum machine to your analogue step sequencer or whatever gives out gate voltage or switch trigger. Beside the main outputs each channel is equipped with an individual output that also can be used as an channel insert."
via this auction
See Perfect Circuit Audio (RSS) for more.
"The DRM1 MKIII is an analogue drum synthesizer.It offers eight instruments, each with seven knobs for forming the sound plus a panorama- and a volume-controller. The user interface is absolutely clear and intutitve - one knob, one function.
The instruments on the DRM1 MKII are as following:
KICK : Mainly but not only for making big and fat kick drums.
DRUM1/DRUM2 : Very flexible instruments that can generate kick- and tom sounds a s well as bongos. Anything from zapp to bling and fantastic PIUU...
MULTI : Three oscillators can be detuned and gives you nice cowbell-like sounds. If you like submarines you can create a nice sonar ping.
SNARE : What can we say about that? Well, you get what you expect.
Hi Hat1 and Hi Hat2 : That's analogue (heavy- or soft-) metal.
CLAP : Classic analogue hand claps.
The instruments of the DRM1 MKIII can be triggered by MIDI (of course velocity-sensitive). There is also an optional trigger option avilable that connects the drum machine to your analogue step sequencer or whatever gives out gate voltage or switch trigger. Beside the main outputs each channel is equipped with an individual output that also can be used as an channel insert."
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
