Sunday, April 30, 2017

GRP Redesigns Website Including Details on New Eurorack Modules


This one is in via John L Rice. GRP has a new website! Their new site includes details on their latest eurorack modules announced at this year's Superbooth. The following is a quick capture of the individual modules for the archives.

"The Grp Synthesizer products are completely hand-assembled and are the link between technology and handcraft, worthy heirs of lute players translated into modern technology. It is important for us to keep constant, in the long run, the sound and designs characteristics so to render unique the Grp Synthesizer and to maintain high quality, also for the future entry level models. The Firm philosophy aims at projecting this engagements in the business so as to guarantee the maximum satisfaction to the client."


VCO

Oscillator w Sine, Triangle, Saw,Pulse Sub octave (-1/-2)
Octave 64’-2’,three CV In; PW/PWM w CV in
Hard Sync , FM2 bus Exp/Lin
Panel Width: 10 HP
+12V = 60mA
-12V = 50mA
+5V = 0mA


VCF 24db

Transistor Ladder Filter w 1-4 poles LP and SELECT aux out
Two audio in (one adj) and two CV In (one adj)
Cutoff, Res, w Automatic Gain Change and ext CV in
Distortion, Amt Res CV In
Panel Width: 10 HP
+12V = 90mA
-12V = 60mA
+5V = 0mA


VCA

Amplifier with selectable Lin/Exp resp..
Audio Input w adj level, Initial Gain and CV1 attn..
Two CV Ins, two Outs w standard and rev polarity
Panel Width: 6 HP
+12V = 10mA
-12V = 12mA
+5V = 0mA


STEREO OUT MODULE

Four Channel Output Mixer
Ins 1,4 freely pannable L-R
Ins 2,3 hard pannedl full L-R
Stereo Main Out w sep Levels and Vu-Meters.
Two Phones Out with adjustable Volume
Panel Width: 16 HP
+12V = 90mA
-12V = 80mA
+5V = 0mA


S&H - Noise

Sample & Hold wint Noise Generator Int/Ext clock source
Input Level, Glide Amount and Internal Clock Rate
Noise Generator has White, Pink and Low Freq Noise
Panel Width: 6 HP
+12V = 15mA
-12V = 12mA
+5V = 0mA


MULTI

Three multiples with 4, 6 and 4 connections
Panel Width: 4 HP
+12V = 0mA
-12V = 0mA
+5V = 0mA


MIXER

Three-channel Audio/CV Mixer
Each one w Input Level
Main Out Level and dual output, with standard and inv polarity
Panel Width: 6 HP
+12V = 10mA
-12V = 10mA
+5V = 0mA


FIXED FILTER BANK

Twelve BP filters, one HP, one LP at spaced cutoff frequencies
Panel Width: 16 HP
+12V = 62mA
-12V = 60mA
+5V = 0mA


ENVELOPE FOLLOWER

CV and Gate extraction from audio signal with Line/Mic selectable level
There is a pre-amped audio signal output
Panel Width: 6 HP
+12V = 18mA
-12V = 20mA
+5V = 0mA


ADSR

Four stage Envelope Generator
Three time ranges selectable
Gate In and Trig In. Gate In available at Thru Output
Two outputs with standard and inv CV Polarity
Panel Width: 6 HP
+12V = 12mA
-12V = 10mA
+5V = 0mA


12db SVF

State Variable Filter with:
12db HP; Two pole high pass filtering.
6db BP; One pole band pass filtering
12db LP; Two pole low pass filtering
NOTCH; One pole band reject filtering
auxiliary Select Out; Frequency
Resonance and Distortion fully adjustable
Two Audio Input (one full level)
Three CV Inputs (one attenuated)
Panel Width: 10 HP
+12V = 40mA
-12V = 22mA
+5V = 0mA


DUAL LFO

Two Low Frequency Oscillators
Each with 3 selectable freq ranges
Dedicated outs for ramp-triangle-saw and pulse-square waveforms
Panel Width: 6 HP
+12V = 12mA
-12V = 10mA
+5V = 0mA

No comments:

Post a Comment