"Hybrid Module für analoge Modulsynthesizer"
click here for the product page in German.
Here's the content in Googlish:
"The K311 A is the main module of the K311 series.
In the upper area (inputs) are the four inputs A - D associated with the LED. The input signals are applied to the states or HIGH LOW. As signals are LOW 0 volts to about +2 volts (or negative stresses). HIGH tensions are from about +4 volts. The area between +2 volts and +4 volts is not precisely defined. Generally, the input voltages modular systems in the usual range of -15 volts to +15 volts not.
In the middle part (Analysis), the LED outputs and the various logical operations are assigned. If the condition is true, the LED and the socket is +5 volts. In particular:
A OR B One of the inputs A or B must be HIGH.
A B XOR One and only one of the inputs A or B must be HIGH.
A AND B Both A and B inputs must be HIGH
D C OR One of the inputs must be C or D HIGH.
C D XOR One and only one of the entrances C or D must be HIGH.
C AND D inputs Both C and D must be HIGH
In the lower area is a logic inverter, the input signal to HIGH LOW or HIGH LOW for converts. The work is a way other than in an analog inverter.
Available in Moog format compatible with Stromversorgungsanschlüßen to:
-- Club Of The Knobs or -- Synthesizers.com"
via sequencer.de
No comments:
Post a Comment
Note: comments that insult people will be removed. Critique on gear is allowed. Do not ask if listings are still available. Click through auction links to check yourself. Posts and pics remain for historical purposes. To reduce spam, comments for posts older than one week are not displayed until approved (usually same day).