MFOS Sound Lab Ultimate

via this auction
"This unit uses a 12VAC wallwart (included). Come with 12 banana patch cables. Features an Auxillary panel for pitch Gate trigger and modulation control utilizing the 1/4inch patch jack standard of most modular systems. This is a very good sounding and affordable battery of synth power as a stand alone unit or a powerful addition to any modular system. The synth can stand alone without a controller with free running oscillators. Very nice ambient and melodic beats can be attained in this configuration alone.

Features:
# Three Musically Accurate VCOs (sawtooth and variable width rectangular wave forms, pulse width modulation, hard-sync, log and linear CV inputs)
# VCOs provide plenty of tracking range. About 14 octaves. Very acurate pitch control with no drift; uses Tempco tempurture compensating resistors to compenate for tempurature drift.
# White Noise Generator: 3 outputs, one internal through the amp and 2 patchable outputs.
# Active Mixer (for VCOs, noise and external input) 1/4inch external input for routing other instruments through the VCA and VCF on the aux panel.
# Voltage Controlled LP Filter (12db/Oct doubles as a sine wave oscillator) with internal AR and LFO modulation and two modulation inputs, one 1/4inch input on aux panel.
# Voltage Controlled Amplifier (log response) with internal AR and LFO modulation and two modulation inputs on front, one 1/4inch input on aux panel.
# Attack Release Envelope Generator with short to very long attack release times and trigger/gate selection; inernally routed to filter and amp, 2 external outputs, 1 gate/trigger input on front panel and one 1/4inch input on aux panel.
# Two Low Frequency Oscillators (square, ramp, tri and sawtooth waveforms) with 2 external outputs each. LFO1 routes internally to modulate the VCF as well. LFO2 routes internally to modulate the VCA as well. Very short to really long frequency adjustment. Indicator LEDs
# Repeat Gate Generator (doubles as another square wave LFO) with two gate outputs. Indicator LED
# Sample & Hold (with variable sample rate and glide) 1 sampling input, 3 outputs and 1 trigger output. Indicator LED
# Attenuator Bank (for an infinite variety of modulation patches)
# Patch Panel Design (provides infinitely variable combinations of sounds)"