via these auctions"This was built a few days ago with a Pro CNC PCB that I had ordered. This is a MIDI to Control Voltage converter to connect a MIDI keyboard or your Computer Sequencer to your Analog gear that have CV inputs based on 1v / Octave Standard.
-This has an onboard Portamento/Glide for even cooler note changes. It can do exaggerated glide when the knob is turned all the way. All Pitch CV outputs are linked to the Portamento.
These are the Outputs on the Left: (3) Pitch Outputs
Theses are the outputs on the Right: (3) GATE (5v) outs.
The knob is for Portamento.
A 12v AC power adapter is included.
-This has 3.5mm jacks. You can use those Headphone adapters to turn the end of a 3.5mm cable into 1/4" plug. That's how I do it and it works.
-This is calibrated for over 6 octaves of notes. This only does Note on/off and Pitch. Very simple yet very accurate. By default it is set to Midi Channel #1, it is possible to change the Midi channel by inserting a DIP Switch, i do not supply that, but the upgrade is very easy (no soldering).
Moog equipment owners be aware that you need to make an S-Trigger Cable for the gate on this to work for you. Here's a link for such a circuit
I can confirm this will work on all MFOS stuff, Roland SH101, BLACET, EURORACK stuff, and most Modern DIY stuff. Just check to see if you use the 1v/oct standard and this will work.
This will not work on korg MS series because that is based on 1v/Hz standard."
No comments:
Post a Comment
Note: comments that insult people will be removed. Critique on gear is allowed. Do not ask if listings are still available. Click through auction links to check yourself. Posts and pics remain for historical purposes. To reduce spam, comments for posts older than one week are not displayed until approved (usually same day).