Plan B Model 7 Panner/Xfader and Model 21C Mini Milton

via
Update via Erik, spotted on Muff's:
"Please notice the campy Milton Babbitt image [below]. The 21C is a fully functional Milton sequencer, albeit only one bank of eight out of the shoot. It's intention was however to create a low-cost option for having two sequential sources which I feel to be important and addresses something that popped up in the second rising of analog - 1 sequencer per system is fine. It's not! But we could not help but including the option of expansion and the unit ships with the code to support an expansion both vertically (more banks) or horizontally (more steps, up to 16) and both at once. When the page goes up a schematic will be provided for those who want to DIY the (very) simple expansion units, although they will be released as products in short time. You'll notice three jumpers on the engine board - these will route the operation to either 8 or 16 steps. The output of the 16 steps will be present at the main (master) output jack."
And on the Panner: "He showed me a panner too, an ELF one which can be used as a crossfader also and a switch when controlled by a gate signal. It's really sweet and the panning is great. Pete was telling me to point to the sound and I could. I've tried this with MAX it's not easy. It's not linear or exp. because none of these will get you the -3 down in the center... A passive panner could also be a crossfader. Vactrols will allow for gating and a passive signal path."


click for a larger shot.
Update: It's worth noting in the Muff Wiggler thread, Peake volunteered to give Peter Grenader a hand soldering. I'm guessing this is Mike Peake, the main voice and driving force behind development of the Alesis Adromeda A6.