MATRIXSYNTH: Syn+The+Sy+Zer - The guitar additive synthesizer song


Tuesday, March 22, 2011

Syn+The+Sy+Zer - The guitar additive synthesizer song


YouTube Uploaded by PsiKTrOn on Nov 13, 2009

"This song presents the guitar additive synthesizer from PK Effects: Syn+The+Si+Zer.
This effect will track your guitar signal and generate a wide range of synthetic and intermodulated sounds.
More info: www.pkeffects.com"

via this auction

"Coloured Syn+The+Si+Zer knobs:
These controls are like the faders of a mixing console. They adjust the volume of each oscillator of the Syn+The+Si+Zer. The red knob controls an oscillator with the same frequency as the input signal. The blue knob controls an oscillator with a frequency one octave lower. The green one adjusts the one octave higher oscillator. Finally, the purple knob adjusts an oscillator with a frequency two octaves higher. A wide range of tonality can be obtained by combining or using separately each oscillator.

Decay:
This control adjusts the speed of how the sound fade after a note is played.

Volume:
This control is the master level of the effect. The volume control reacts like an “analog device”. This means that pushing all the oscillators and the volume at their maximum will not generate digital clipping but a smooth analog distortion.

Unnamed switch (Waveform Switch):
If you take a look at the module picture, there is an unnamed switch. It selects the waveform of the oscillators. The control is unnamed here because the waveforms can be customized.

The basic Syn+The+Si+Zer contains the three following waveforms: square wave, sine wave and sawtooth waveform.

Mode Switch:
This control mixes the dry signal of your guitar with the synth sound. In mode 0, the dry signal is disabled. In mode 1, the red oscillator is replaced by the dry signal. The red control will affect the volume of the dry guitar signal. In mode 2, the dry signal is added at a fixed volume and the 4 knobs lets you adjust all the oscillators around the dry signal.

Footswitch:
When pressed to the maximum, the footswitch enables/disables the effect.

Some info About the Pitch detection algorithm:
The tracking system in the Syn+The+Si+Zer module has its own personality. And to avoid tracking issue, you have to respect some basic things.

First, the effect is monophonic. It can only detect one note at a time. Finally, the frequency of the oscillators doesn’t change when you bend a note. This is just because the effect updates the frequency when it detects that you played a new note. This is the characteristic that allow you to create an intermodulation effect when you combine the sound of your guitar with the one generated by the effect."

1 comment:

  1. I have several bass synth pedals. This one is totally different, no attempt at tracking, no filter, it very straight forward and I feel that it will work well for many people.

    ReplyDelete

To reduce spam, comments for posts older than one week are not displayed until approved, usually same day. Do not insult people. For items for sale, do not ask if it is still available. Check the auction link and search for the item. Auctions are from various sellers and expire over time. Posts remain for the pics and historical purposes. This site is meant to be a daily snapshot of some of what was out there in the world of synths.

PREVIOUS PAGE NEXT PAGE HOME


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH