Panote09 ANALOG SYNTH

via this auction
videos at the auction and here.

"This is the analog synth which runs on DC9V and supplies more than 250mA (negative center only such as BOSS PSA-120,240.


VCO1------------------

(KNOBS)
FREQ.=frequency
P.ADJ=Pulse width adjust

(SWTCHES)
PULSE=Pulse wave signal is sent to VCF alone.
PWM=VCO2 is put into VCO1 as PWM.
LFO
NG=NOISE GENERATOR
SH=SAMPLE & HOLD

VCO2-------------------

(KNOBS)
FREQ.=frequency

(SWITCHES)
LFO
NG=NOISE GENERATOR
SH=SAMPLE & HOLD

VCF---------------------

(KNOBS)
RESON.=RESONANCE adds extra high freq. and oscillation.
　　　　
FREQ=cut off frequency
VCO1=volume of VCO1
VCO2=volume of VCO2

(SWITCHES)
LFO


VCA----------------------

(KNOBS)
INI.GAIN=Gain control.EG level should be controlled with VCA ini.gain.

If you would like to get maximum EG effect,EG level should be maximum and VCA ini.gain should be minimum.
　　　　
VOLUME

(SWITCHES)
EG=Envelope generator

SAMPLE&HOLD-----------------------

(KNOBS)
LEVEL=OUT LEVEL
RATE

It supplies random voltages to drive VCOs like S.F saunds.


NOISE GENERATOR--------------------------

(KNOBS)
NOISE=noise level


ENVELOPE GENERATOR----------------------------

(KNOBS)
LEVEL=OUT LEVEL
ATTACK
RELEASE

(SWITCHES)
Black push switch

The push switch supplies trigger signal to EG and ATTACK&RELEASE knobs process it to send it
to VCA.

LFO--------------------------------

(KNOBS)
LEVEL=OUT LEVEL
WAVE=2 waveforms are mixed by this knob.
SPEED

Please be sure to use DC(NOT AC)9V NEGATIVE CENTER(NOT POSITIVE).If you are not sure,please ask me anything because the wrong polarity of the adaptor will break the device."