via this auctionNoisebug (RSS)
"Analogue Sequencer.
8 Step dual Gate sequencer
with 8 step trigger outputs.
Width 18HP
Requires 5V
If you have a low budget, you can build up and buy modules as and when they can be afforded.
As they are single channel completely independent sequencers, they can be bought as and when they are needed, they can be clock at different clock divide ratios, they can each have different step lengths. None of these features are available with multi-channel sequencers.
These sequencers have a step out socket for each step (mainly for use with adjusting sequence length. Other sequencers use switches to change length). The advantage is that the sockets need not only be used for changing sequence length, but they can be used individually to clock or trigger other devices. The 8 step outs are basically the same as a Doepfer A161 trigger sequencer module making the CV8 and GT8 exceptional value.
When used with our master clock module MC01 , all sequencers can be reset globally from the Master Clock and they will be reset to THE LAST STEP. With just about all other sequencers, especially when using MIDI as the master clock, the sequencer must manually be stepped to the last step, otherwise when the clock is started, step 2 is in fact the first step triggered. Our automatically go to the last step eliminating this problem (see note in MC01 section for more explanation).
Main Applications
For triggering envelopes, clocking other devices, or controlling CV's. The GT8 comes with a 5V range as standard. This range is ideal for triggering most monosynths and envelopes.
If requested when ordering, the CV8 can be given a 10V range. It is possible to change to range between 5 and 10V by adding or removing resistor R13 (100K) on the main board. Having this resistor in place makes the range 10V. Changing this yourself is safe to do but will invalidate the warranty.
Controls & Sockets:
8x Gate switches (1/off/2), Step button
8x Postition LEDs.
8x step outputs, Gate 1 Out, Gate 2 Out, Clock Input, Reset Input"
No comments:
Post a Comment
To reduce spam, comments for posts older than one week are not displayed until approved, usually same day. Do not insult people. For items for sale, do not ask if it is still available. Check the auction link and search for the item. Auctions are from various sellers and expire over time. Posts remain for the pics and historical purposes. This site is meant to be a daily snapshot of some of what was out there in the world of synths.