Moon Modular 568P Programmer Extension Module

Note: Auction links are affiliate links for which the site may be compensated.

via NOISEBUG Reverb


"Manufacturer Description:
The M568P programmer module is an extension to the M568 Quad Sequential Trigger Source. Now the 2x12 Sequencers/sequence-combinations can be saved to memory for later recall.

The non-volatile memory consists of two memory bands with 12 memory slots each. They are selected by the toggle switch "Memory Bank" and the 12-position rotary switch "Sequence Memory". Pushing the "Recall" button activates a saved sequence.

The "visible" sequence is being hold in an edit-buffer, a sort of "zero"-memory position - so nothing will get lost when switching the module on and off. Only when a memory slot gets recalled the edit buffer is overwritten (therefore there is no automatic recall of the dialed memory position when the module is turned on).

To save an adjusted or modified sequence, push the "Save"-button (Save-LED blinks), select the desired memory position and push the "Save"-button again (Save-LED dies out, sequence is saved).

To erase an adjusted or modified sequence, push the "Clear"-button (Clear-LED blinks), select the desired memory position and push the "Clear"-button again (Clear-LED dies out, sequence is erased)

To duplicate the adjusted or modified sequence or to move it to a different memory slot, push the "Copy"-button (Copy-LED blinks), select the desired memory positions and push the "Save"-button (Save-LED blinks), select the desired destination memory-position and push the "Copy"-button again (LEDs die out). The sequence is copied now.

The buttons/jack combination under the "Go to" in the lower port of the module the next and previous memory slots can be recalled - using the respective push buttons or trigger pulse.

To download the manual for this module, please click here"