CousinSlewey

Published on Mar 3, 2013 Dmitri SFC·78 videos

"Serge Dual Neg Slew, Peak & Trough, Voltage Controlled Slew, Tripple Wave shapers, 73 Envelope Generator, 73 Filter, CGS VCA ...and 4 step Programmer.________
_The Two NEG slews are the Oscillators, They are each patched into a Wave Shaper, The Wave Shapers are being VC modulated by the 73 Envelope Gen and the V.C.Slew. One of the sounds is being Gated on the way into the TWS using the CGS VCA rather than after the TWS (Thanks to Doug Lynner for that tip !!). A pulse coming from a step on the Programmer or some where is pinging the 73 Filter into self oscillation to make a low rumble bass drum/ giving this patch its third sound. The bass won't be very noticeable on small speakers. The V.C.Slew is used as an Attack Release Envelope and simultaneously its End Pulse Out is clocking the Programmer. The 73 EG and V.C.Slew make great funky clock dividers with VC control. When using the Pulse In on the V.C.Slew it functions like the 73 EnvelopeGenerator, Meaning it won't start a new envelope until its done with the one its working on so, If you feed it a clock that is fast while the 73 EG has a long Envelope setting... The Envelope starts at funky times making cool rhythms. One might think being adjusted by a pot with no time quantization that it would be random but its not. Its pure funk bubbling out of the electrolytics inside. Kind of hard to not fall into a rad syncopated poly-rythm."

Update:

Slewster
Published on Mar 3, 2013 Dmitri SFC·79 videos

"SERGE POS, SSG, DVG, 73 VCF, 73 EG, CGS VCA , VCA___________
_Each Positive slew is cycling and used as a VCO they are both also gated by a VCA. One half of the Dual Voltage Processor is used to mix the two Gated audio signals before being patched into the 73 Filter. The 4 step Programmer VCs one Positive Slew while the Stepped section of the SSG samples A row of CV from the Programmer and in turn pitches the second half of the Dual Positive Slew. SSG is SAMPLE AND HOLD. the other half of the DualVoltageProcessor mixes CV signals from the EG and SSG, the Output its patched to CV the Filter. The 73 EG is generating an Envelope that controls a Gate, Also the END Pulse out of the 73 EG is clocking the Programmer in one direction. The CYCLE out of the SSG clocks the Programmer in the other direction a couple steps here and there."