MATRIXSYNTH: Doeper A-154 Sequencer


Thursday, March 14, 2013

Doeper A-154 Sequencer

Note: Auction links are affiliate links for which the site may be compensated.
via this auction

"Great little controller for CV sequencing.

module a-154 is a supplement to the a-155 analog/trigger sequencer module. it offers a lot of new features that are not available in the basic control unit of the a-155. the a-154 is used to replace the control unit of one or two a-155, i.e. the section marked "control" with start / stop / step / reset buttons and inputs in the upper left corner of the a-155 front panel. if the a-154 is used to control the a-155 the control section of the a-155 is put out of action.

these are the features of the a-154:
* several running modes: forward, backward, pendulum, random, cv controlled step adressing. all modes are available as loop or one-shot.

* led display of the 5 different current modes and one led for loop/one-shot display

* manual and voltage controlled selection (with attenuator) of the running mode. if no external control voltage is applied one of the 10 modes (5 modes x 2 loop/one-shot) is simply selected with a rotary knob. the cv input with attenuator is used to modulate the running mode with an external control voltage (digital high/low cv to switch between two modes or continuous analog cv to sweep through different modes). with the combination of manual control and cv with attenuator it is possible e.g. to use only two neighbouring modes (e.g. forward/backward) or sweep through all possible running modes

* manual and voltage controlled selection (with attenuator) of first and last step of the sequence. the range is step 1...8 in 8 step mode resp. 1...16 in 16 step mode

* if the running mode "cv controlled step address" is selected the first step section is used to determine the active sequencer step. consequently manual and voltage controlled selection (with attenuator) of the active step is possible: the active step can be set by hand with the first step manual control and then modulated by an external control voltage (e.g. lfo, random, s&h, theremin, light cv source, joy stick) at the first step cv input (with attenuator)."

No comments:

Post a Comment

Note: comments that insult people will be removed. Critique on gear is allowed. Do not ask if listings are still available. Click through auction links to check yourself. Posts and pics remain for historical purposes. To reduce spam, comments for posts older than one week are not displayed until approved (usually same day).

PREVIOUS PAGE NEXT PAGE HOME



Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH