L.L. Electronics RozzBox One V2 SN 00009 - Full Feature List

Note: Auction links are affiliate links for which the site may be compensated.
via this auction

"Up for sale is a (1) rare L.L. Electronics RozzBox One V2 synthesizer in very good condition. It works perfectly and optical it is in nice condition too (see photo's). It's made in Germany (2008) and the serial number is: 0009 (only 25 ever made). It comes with its power supply adaptor."

See below for the full list of features on the RozzBox.

The RozzBox One V2 has the following Features:

Oscillators & Signal Sources

Count: 4 OSCs plus noise, external input, and ring modulator Octave Range: 4' to 32' Glide: adjustable FM: fully functional 4 operator FM engine with 7 algorithms Waves: - Standard Waveforms: Saw, Pulse (PWM), Triangle, Wave - 14 additional waveforms for the OSCs as factory presets - 2 additional waveforms that can be “drawn“ with the User Interface, storable with each Patch Sync: Hardsync possible Other functions: Pitch Tracking of OSC1 can be disabled

Filters

Count: 2 Filters in serial connection Tube Version only: 3 Filters in serial/parallel connections Filter 1: - Digital high pass/low pass filter with resonance and 24dB/octave (4 filter poles) Filter 2: - Analog lowpass ladder filter with resonance and 24dB/octave (4 filter poles) Filter 3: Tube Version only - Completely Tube-driven analog lowpass filter with resonance and 12B/octave (2 filter poles) Filtertracking: individually adjustable Filtermodes: Tube Version only: - Digital filter, Transistor filter, serial - Digital filter, Tube filter, serial - Transistor filter, Tube filter, serial - Transistor filter, Tube filter, parallelThe Tube Filter can be switched to be used on Voice 1 (local), or to be used on all Voices (global). Misc: The two Filters selected can be modulated individually.

Low Frequency Oscillators

Count: 2 Frequency Range: Frequency ranging from very slow to very fast :) Waveforms: a, Sawtooth, Triangle, Square, Sample&Hold (random generator) b, Sawtooth, Triangle and     “Wave“ plays one of the 2 user waveforms available     “Wave Tracking Generator“ using one of the 2 user Waveforms to follow the envelopes.

Envelopes

Count: 2 Parameters: Attack, Decay, Sustain, Release Trigger Modes: single, multi Shapes available: linear, exponential

Rozzy Modulation Sources

Audio-In: Use that feature for example to modulate the Oscillators Frequency. Envelope Follower: Uses the Envelope of an incoming signal to generate a Modulation-Signal. (The follower has its own, independent input) Mixer: Adds the Audio-Signals alltogether. Fine for very weird modulations :)

Sequencers

Count: 4 independent Seqs per Voice Internal Connections (each) Inputs: - Clock in, routable by Trigger Matrix - Reset in, routable by Trigger Matrix - Start in, routable by Trigger Matrix - Stop in, routable by Trigger Matrix Internal Connections (each) Outputs: - Continuous, routable by Modulation Matrix - Gate out, routable by Modulation Matrix, Trigger Matrix - Duration out, routable by Trigger Matrix Dimension: up to 16 Steps, 1 Track Running Modes: Forward, Backward, Bounce, Random, One Shot Sync Modes: Step-Follow Seq 1 - 4 Clocking Options: fully selectable by Trigger Matrix, for example    - Trigger by MIDI “Note on“    - Trigger by LFO 1    - Trigger by MIDI Clock

Modulation

Fixed Modulation Paths with Attenuator: Envelope 1 => Filter cutoff 1 Keytrack => Filter cutoff 1 Envelope 1 => Filter cutoff 2 Keytrack => Filter cutoff 2 LFO1 => Oscillator 1 PWM LFO1 => Oscillator 2 PWM LFO1 => Oscillator 3 PWM LFO1 => Oscillator 4 PWM Velocity => Envelope 2 general amount Velocity => Envelope 1 general amount LFO1, LFO2, ENV1, ENV2 or Velocity => Oscillator 1 Volume LFO1, LFO2, ENV1, ENV2 or Velocity => Oscillator 2 Volume LFO1, LFO2, ENV1, ENV2 or Velocity => Oscillator 3 Volume Matrix connection Count: 4 Sources: ENV1, ENV2, LFO1, LFO2, Velocity, Modulation Wheel, Modulation Wheel*LFO1, Oscillator1-2, Oscillator Mix, Envelope Follower, Sequencer 1-4 Destinations: Pitch OSC 1-4, Pitch (general), Pulsewith OSC 1-2, Cutoff VCF 1, Cutoff VCF 2, Cutoff (general), Resonance VCF 1, Resonance VCF 2, LFO 1 Speed, LFO 2 Speed, MOD 1 Amount, Volume Polarity: positive and negative (inverted)

Trigger Matrix

Connection Count: not limited Sources: - Sequencer 1-4 Gate, Duration (8 Sources) - Midi gate (of used Voice) - Midi gate (General) - Midi controller - LFO 1 - LFO 2 - Env Follow Trigger - MIDI Clock - Inverted Gate Destinations: - Sequencer 1-4 Clock, Reset, Start, Stop (16 Destinations) - ENV1 Trigger - ENV2 Trigger - LFO1 Reset - LFO2 Reset

Special Rozz-Functions

Oscillator Mode: Aliasing on/off Output Hacker: Adds "artificial" Aliasing to the Output Filter Mode: Clean/Chaos (chaotic behavior) Mixer: 4 different clipping/distortion modes, intensity adjustable Sample Rate: Full/Half Bit Resolution: adjustable 1-16 Bit

Other Features

Multimodes: (polyphonic Version only) - Poly operation - Mono operation (1 voice) - Mono operation (unisono) - Multimode: 5 - Multimode: 1 - 4 - Multimode: 2 - 3 - Multimode: 1 - 2 - 2 - Multimode: 1 - 1 - 1 - 2 - Multimode: 1 - 1 - 1 - 1 - 1 (5 independent "monophonic Synthesizers") Multimode Parameters: (polyphonic Version only) - Midi Channel - Patch - Detune - Note Offset - Note Frame (specifies Range, in which the Voice reacts on incoming Note-Messages, eg. for Drum-Maps) Patch Memory: Internal patch memory for 100 Programs, expandable via external memory jack. Multimode Memory: Internal patch memory for 100 Multimode Configurations. MIDI-Control: Complete MIDI-control of every parameter via Controllers & NRPNs Additional functions: Waveform Dump Memory Dump OS Dump RozzControl Support     ("RozzControl" is a separate Controllerbox with extra Knobs for your RozzBox)

Mechanical Specs

Enclosure: Aluminum enclosure with maple sides Dimensions(WxHxD): 253x90x150mm with Knobs User Interface: 27 knobs 29 slide switches 4 Buttons for Memory and additional functions Full Graphic OLED-Display 1 endless-turn rotary encoder for additional parameters External Connections: Audio Input Envelope Follower Input Audio Outputs (Main Mix, Voice Outputs 1-5) MIDI In MIDI Out Memory / Accessory Power In (power supply is included)