via this auction
"CGS07 Gate Sequencer module in MOTM format. Four channels by 2-8 Steps (step number selected by front panel rotary switch. Small flaw on front panel from when the corner of another module gouged the faceplate (see pictures). Recently re-wired. Fully tested 100% working condition.Here is some additional info from Ken Stone's (Catgirl Synth) Modular Synthesizer website...
"By itself, the main board of the gate sequencer can be used as a sequential pulse generator. When clocked by an external source, each of its outputs will come on one after the other. This can be used to sequentially trigger up to eight events. An example would be to set the number of steps to 2, then connect outputs 1 and 2 to two drum sound generators. A pulse train fed to the clock input would then produce a drum roll alternating between the two drum sounds.
When coupled with the switch bank and buffer boards, rhythms of up to eight steps can be created. Each switch bank and buffer board contains two channels. Additional switch bank and buffer boards can be connected to main board to produce gate sequencers with more channels. While these outputs can be used to trigger drum sounds, that is not their only use. They can be used to trigger envelope generators, step waves in wave tables, drive other sequencers etc. Once you have a gate sequencer in your modular, you will wonder how you ever survived without it."
Featuring
Alco Knob
Switchcraft Jacks
Custom Anodized Aluminum Front Panel (Front Panel Express)
20" MOTM Power Cable"
No comments:
Post a Comment
Note: comments that insult people will be removed. Critique on gear is allowed. Do not ask if listings are still available. Click through auction links to check yourself. Posts and pics remain for historical purposes. To reduce spam, comments for posts older than one week are not displayed until approved (usually same day).